r/SurfaceLinux • • Aug 21 '26

IDEA Linux on an ARM-based Surface Laptop

Post image
244 Upvotes

I have successfully got Linux running on the Surface Laptop for Business 13-inch 1st Edition with Snapdragon.
Although there are some features that do not work, it functions well enough for everyday use. I may publish the source code and a guide at a later date.


r/SurfaceLinux • • Feb 01 '21

IDEA 150€ Surface Pro 3 + Pop!_OS = yaaay!

Post image
219 Upvotes

r/SurfaceLinux • • Jan 02 '20

Guide [GUIDE] Installing Linux on Surface Devices · linux-surface/linux-surface Wiki · GitHub

Thumbnail
github.com
192 Upvotes

r/SurfaceLinux • • Jul 31 '26

IDEA Arch Surface Pro 5 - My all day System.

Post image
174 Upvotes

This is my Arch Surface System. Is incredibili fast and i can work, study and do a lot of things with it.

My Arch is running on a Surface Pro 5 with i7, 8Gb of ram and 256Gb of SSD.

I use Arch BTW


r/SurfaceLinux • • Dec 29 '25

Discussion Old Surface Pro 4 was a better option than an iPad for Uni!

Post image
138 Upvotes

Was doing some auctions during a Japan trip and ended up getting a Surface Pro 4 for ¥1200! Aside from getting a Bluetooth keyboard and a Microsoft Stylus for $30, the abysmal hardware made it seem bad with Windows. Migrating to Arch + Linux surface Kernel really helped this become a wonderful device for internet browsing + programming, and although sleep state isn’t really its strongest suit, the battery lasting a good 2-8hours on different used makes it just a great travel companion. overall, I love this thing and hope it continues to last!

(I uploaded this to the wrong sub so mb 😭)


r/SurfaceLinux • • Sep 16 '26

Discussion I made the SP7's cameras work on linux-surface 6.19.8

Post image
135 Upvotes

Based on thisiscamk/sp7-ipu4-camera's work, I made this driver work on Fedora and added a few stability improvements. The cameras also work in Zoom and Discord now

There's an issue where the camera flickers because of improper auto white balance adjustments if there's a bright light source in the scene. Also, the autofocus for the back camera doesn't work

GitHub link

For installation, just run ./install.sh

It's entirely vibe-coded but it works


r/SurfaceLinux • • Sep 05 '26

Discussion Booted surface laptop snapdragon 13inch 1st edition

Post image
130 Upvotes

This is fedora using kairunjp’s kernel on GitHub. Haven’t put much use into it yet, but exciting


r/SurfaceLinux • • Mar 16 '20

Travel setup

Post image
125 Upvotes

r/SurfaceLinux • • Oct 16 '25

IDEA Cobbled together a decent touch-based UI with the help of Hyprland & SXMO packages.

122 Upvotes

Anybody got ideas to make it go further?


r/SurfaceLinux • • Dec 10 '15

Out-of-the-box support for Linux Mint 17.3 Cinnamon on Surface devices - with improved touch support

121 Upvotes

This is a follow-up to my original LiveCD, but as I've done lots of updates since the last edit (and can't change the title to reflect that it's no longer the Beta/RC1 of Mint 17.3), it's high time for a new post.

The latest LiveCD now contains the following startup applications (as well as blueman for Bluetooth management, as before):

  • onboard for on-screen keyboard; docked to the bottom of screen by default

  • touchegg for gestures; compiled from git so that it works smoothly with Mint, unlike the standard Ubuntu version

  • autorotate with palm detection for automatic rotation; modified to work with SP1-3, regardless of model

  • autobacklight for auto backlight; slightly modified so it's disabled by default

  • redshiftgui for adjustment of light at night-time; disabled by default, and set to the longitude/latitude of Greenwich, UK when enabled

Also, I've included a GUI for Touchegg - again, I had to slightly modify the code for this as the original did not automatically restart touchegg after saving a new configuration, even though it tried to. Unfortunately, due to the /home folder being empty by default on the LiveCD, you need to press the "Defaults" button and then "Save" to be able to change the gestures.

As for firmware, I've included the latest Skylake and Broxton graphics drivers from Intel, along with the latest Marvell Wifi/Bluetooth.

Finally, I've included the latest kernel-surface package from my kernel PPA, which has all of the patches for the Surface line of devices known of thusfar, along with backported drm-intel graphics (including FBC and PSR power-saving for SP3 and Surface 3), plus the updated GCC-5 and initramfs-tools. There's also an updated graphics stack from my xorg-update PPA, which bumps X.org up to 1.18.2 along with all the drivers. Oibaf's PPA is also included as a PPA, so that LibDRM and Mesa are updated regularly once installed.

EDIT 1: There was slight mishap with the original LiveCD. The default configuration for touchegg doesn't contain a mapping for single-tap to "left mouse click", and without this, options in any menu accessed from the taskbar (including the Main Menu and Profile) don't work. I've fixed the issue by adding this both to touchegg and Touchegg-gce, but unfortunately this required a new ISO. The link to this ISO is now above.

EDIT 2: From the questions so far, it looks like I need to clarify the support on various Surfaces.

  • Surface Pro, 2 and 3: everything should work.

  • Surface Pro 4 and Book: with these having cutting-edge technology, the support in the Linux kernel isn't fully there yet. Due to this, the touchscreen won't work, nor will backlight control, physical buttons and cameras I believe.

  • Surface 3 (non Pro): although I have included kernel patches for the S3 (mostly the drm-intel changes, as these are required to actually boot), again support is limited. It's usable at least, though.

  • Surface RT range: these definitely won't work with this LiveCD. As 32-bit ARM devices, they'd need a different one, even if the bootloader could be bypassed somehow.

I would really like the SP4, SB and S3 experience with this CD to be better, and keep trying bleeding-edge patches in the hope these will fix at least the touchscreen, but I only have an SP3 so I can't easily test any changes (other than to check they don't break anything on that at least). It will get there eventually though; Linux always has to play catch-up with new technology, unfortunately.

EDIT 3: With the fix in Edit 1, onboard didn't function properly (keys were clicked twice - not very useful). I added a workaround for this by adding Onboard to its own group within the Touchegg GUI, and making single-tap do nothing for that group. Also, on the SP2 the touchscreen and pen weren't being reorientated properly when the screen was rotated. So, I made a number of changes to the autorotate script, and it works as intended now; there's even "palm detection" for when you're using the pen. Thanks to AykoPoel for the inspiration behind that. Finally, I got rid of the "remove media and press ENTER" prompt on powering off from the LiveCD, and set a timeout of 1 second on the grub menu (for when there's no keyboard/type cover). These are all fairly minor amends, but I've uploaded the new LiveCD with them now, please see above as usual for the updated link.

EDIT 4: I've now shared a folder on Google Drive and placed the ISO image into it, so the link will remain static. There's also a "Beta" sub folder, which is the latest, untested image - the current is identical in terms of scripts and applications, but with a patched Xenial kernel. Testers, especially with Surface Pro 4 and Surface Book, are most welcome! On previous models, this kernel appears to be more stable, quicker to boot, slightly better in terms of battery consumption, and because it's based on the latest "stable" Linux kernel, it's possible to integrate patches such as this one. The "Alpha" and "Beta" sub folders are now obsolete, I have kept the old ISOs within OLD sub-folders for anyone who still wants them, but as the latest Alpha is more stable, up-to-date and runs on more devices than the old "stable", with better display and HiDPI, it seemed insane to still keep that as an "Alpha". However, because many people have become accustomed to downloading the latest from the "Alpha" folder, for now I've made a copy of the "stable" into there.

EDIT 5: I've integrated some more ACPI patches into the latest beta version, mostly from patchwork, so the kernel more closely resembles the latest Linux tree. All of the patches (except BFQ, because that one's easy to find) now have a "From: (url)" at the top, in case anyone is curious where they come from. A few are amalgamated, and there may be slight amends, which were necessary to prevent problems with fuzzes (or worse, rejections) during the patching process. The beta LiveCD and compiled debs are now up to reflect the changes. No longer relevant, as these are all in the 4.4 kernel.

EDIT 6: The beta ISO has been updated with HiDPI enabled, text scaling set to 0.7, cursor size set to 18 (from 24) and icon size to "small", rather than standard. This further improves the touch experience, as UI elements and text are much easier to click (and read!); dconf-editor is included too, in case you want to change any settings. I've also upgraded the kernel to the latest Xenial version, based on 4.3.3. The debs are in the usual place for anyone who wants them, with patches to follow on GitHub later today (they're exactly the same, although I've modified the build script very slightly to do away with the "-oldmodule" and "version" patches). Also no longer relevant, but the stable ISO has all of the updates mentioned. The kernel, of course, is more up-to-date than that now. I have also removed the debs from Google Drive because they can be downloaded directly from the PPA instead.

EDIT 7: Last edit before the New Year - promise! I've added the UVC video patch and the "official" touchscreen patches one two from Daniel Martin (replacing my version) - thanks go to shvr for sourcing those. There's also a minor pinctrl patch which was pushed to 4.4-rc6, so that's included too. Merry Christmas ;) The pinctrl patch is integrated into the 4.4 kernel, so this is no longer required either. Err.. Happy Easter, I guess? ;)


r/SurfaceLinux • • May 30 '17

FAQ Current State of Surfaces

116 Upvotes

State of Surface-Series Devices:

Note: These are as of Stock Linux Kernel 4.13 (with Distro-Specific Patches, which in my case is Ubuntu 17.10)

 

1st Generation Devices

 

Surface RT 1:

  • Not Applicable:

    Note: We have a method by which to disable UEFI Secure Boot, but so far, only a partially functional GRUB package has been ported to this specific NVidia Tegra 3 SoC. I wouldn’t expect anything coming for it soon.

 

Surface Pro 1:

  • CPU: Working, all aspects working as expected

  • SSD: Working

  • Sleep:

    • S1 (CPU Stops Executing Instructions): Working

    • S2 (CPU Powered Off): Working

    • S3 (Suspend to RAM, what most of you call "Sleep"): Working (albeit slow compared to newer devices)

    • S4 (Suspend to Disk, what most of you call "Hibernation"): Working

  • USB: Working

  • SDXC Slot: Working (albeit detected as USB in most cases, not sure if this is an issue or not)

  • Buttons:

    • Power: Working

    • Volume Down: Working

    • Volume Up: Working

    • Windows: Working

  • Video:

  • Integrated Intel Card: Working, Hardware Accelerated

  • DisplayPort: Working

  • Touch:

    • Multi-touch: Working

    • Pen: Working, Input Detected as Pen Input

  • Bluetooth: Working

  • Wi-Fi:

    Note: The default driver works fine for some, but not for others, to install the Marvell Driver, follow the instructions here: Link

    • A/B/G/N: Working

    • 2.4 GHz: Working

    • 5 GHz: Working

    • Promiscuous Mode: Not Working, Marvell drivers are to blame

  • Cameras:

    • Rear Camera: Working

    • Front Camera: Working

  • Sensors:

    • Ambient light sensor: Working (Many Distros don’t yet have auto-brightness configured, in many cases scripts like those found here are necessary: Link

    • Accelerometer: Working (Many Distros don’t yet have rotation detection configured, in many cases scripts like those found here are necessary: Link

    • Gyroscope: Working (Many Distros don’t yet have rotation detection configured, in many cases scripts like those found here are necessary: Link

  • Battery Status: Fully Working

  • Power Management: Fully Working (but not near to as optimized as Windows), and gets just as hot as Windows does under a heavy CPU load

 

2nd Generation Devices

 

Surface RT 2:

  • Not Applicable:

Note: We have a method by which to disable UEFI Secure Boot, but so far, only a partially functional GRUB package has been ported to this specific NVidia Tegra 4 SoC. I wouldn’t expect anything coming for it soon.

 

Surface Pro 2:

  • CPU: Working, all aspects working as expected

  • SSD: Working

  • Sleep:

    • S1 (CPU Stops Executing Instructions): Working

    • S2 (CPU Powered Off): Working

    • S3 (Suspend to RAM, what most of you call "Sleep"): Working (albeit slow compared to newer devices)

    • S4 (Suspend to Disk, what most of you call "Hibernation"): Working

  • USB: Working

  • SDXC Slot: Working (albeit detected as USB in most cases, not sure if this is an issue or not)

  • Buttons:

    • Power: Working

    • Volume Down: Working

    • Volume Up: Working

    • Windows: Working

  • Video:

    • Integrated Intel Card: Working, Hardware Accelerated

    • DisplayPort: Working

  • Touch:

    • Multi-touch: Working

    • Pen: Working, Input Detected as Pen Input

  • Bluetooth: Working

    • LE: Not Working in some cases, others it does, largely untested

  • Wi-Fi:

Note: The default driver works fine for some, but not for others, to install the Marvell Driver, follow the instructions here: Link A/B/G/N: Working

  • 2.4 GHz: Working

  • 5 GHz: Working

  • Promiscuous Mode: Not Working, Marvell drivers are to blame

  • Cameras:

    • Rear Camera: Working

    • Front Camera: Working

  • Sensors:

    • Ambient light sensor: Working (Many Distros don’t yet have auto-brightness configured, in many cases scripts like those found here are necessary: Link

    • Accelerometer: Working (Many Distros don’t yet have rotation detection configured, in many cases scripts like those found here are necessary: Link

    • Gyroscope: Working (Many Distros don’t yet have rotation detection configured, in many cases scripts like those found here are necessary: Link

  • Battery Status: Fully Working

  • Power Management: Fully Working (but not near to as optimized as Windows), and gets just as hot as Windows does under a heavy CPU load

 

3rd Generation Devices

 

Surface Pro 3:

  • CPU: Working, all aspects working as expected

  • SSD: Working

  • Sleep:

    • S1 (CPU Stops Executing Instructions): Working

    • S2 (CPU Powered Off): Working

    • S3 (Suspend to RAM, what most of you call "Sleep"): Not Working, S3 was replaced by “Connected Standby”, there is some debate about this because I can't find the source for the claim to follow, and I have been linked this so take it with a grain of salt until then. Connected Standby support in Linux would require every distro to near to rewrite every applet they build to support it – If you use it, it results in a device hang, most kernels (like Peter Hunt’s popular “Tiggerite” Kernel) disable S3 entirely.

    • S4 (Suspend to Disk, what most of you call "Hibernation"): Working: To disable suspend on systemd based systems (almsot all fo them) in favor of hibernate. Credits to /u/alraban for this method: sudo ln -s /usr/lib/systemd/system/hibernate.target /etc/systemd/system/suspend.target && sudo ln -s /usr/lib/systemd/system/systemd-hibernate.service /etc/systemd/system/systemd-suspend.service

  • USB: Working

  • SDXC Slot: Working (albeit detected as USB in most cases, not sure if this is an issue or not)

  • Buttons:

    • Power: Working

    • Volume Down: Working

    • Volume Up: Working

    • Windows: Working

  • Video:

    • Integrated Intel Card: Working, Hardware Accelerated

    • DisplayPort: Working

  • Touch:

    • Multi-touch: Working

    • Pen: Working, Input Detected as Pen Input

  • Bluetooth: Working

    • LE: Not Working in some cases, others it does, largely untested

  • Wi-Fi:

    Note: The default driver works fine for some, but not for others, to install the Marvell Driver, follow the instructions here: Link

    • A/B/G/N: Working

    • 2.4 GHz: Working

    • 5 GHz: Working

    • Promiscuous Mode: Not Working, Marvell drivers are to blame

  • Cameras:

    • Rear Camera: Working

    • Front Camera: Working

  • Sensors:

    • Ambient light sensor: Working (Many Distros don’t yet have auto-brightness configured, in many cases scripts like those found here are necessary: Link)

    • Accelerometer: Working (Many Distros don’t yet have rotation configured, in many cases scripts like those found here are necessary: Link)

    • Rotation Sensor: Working (Ubuntu 17.10 does, though many Distros don’t yet have rotation detection configured, in many cases scripts like those found here are necessary: Link)

    • Gyroscope: Working (Many Distros don’t yet have detection configured, in many cases scripts like those found here are necessary: Link)

  • Battery Status: Fully Working

  • Power Management: Fully Working (but not as optimized as Windows), and gets just as hot as Windows does under a heavy CPU load. There are reports of better battery life in Linux around this sub, though I myself don't experience it.

 

Surface 3:

  • CPU: Working, all aspects working as expected

  • SSD: Working

  • Sleep:

    • S1 (CPU Stops Executing Instructions): Working

    • S2 (CPU Powered Off): Working

    • S3 (Suspend to RAM, what most of you call "Sleep"): Not Working, S3 was replaced by “Connected Standby”, there is some debate about this because I can't find the source for the claim to follow, and I have been linked this so take it with a grain of salt until then. Connected Standby support in Linux would require every distro to near to rewrite every applet they build to support it – If you use it, it results in a device hang, most kernels (like Peter Hunt’s popular “Tiggerite” Kernel) disable S3 entirely.

    • S4 (Suspend to Disk, what most of you call "Hibernation"): Working: To disable suspend on systemd based systems (almsot all fo them) in favor of hibernate. Credits to /u/alraban for this method: sudo ln -s /usr/lib/systemd/system/hibernate.target /etc/systemd/system/suspend.target && sudo ln -s /usr/lib/systemd/system/systemd-hibernate.service /etc/systemd/system/systemd-suspend.service

  • USB: Working

  • SDXC Slot: Working (albeit detected as USB in most cases, not sure if this is an issue or not)

  • Buttons:

    • Power: Working

    • Volume Down: Working

    • Volume Up: Working

    • Windows: Working

  • Video:

    • Integrated Intel Card: Partially Working, Hardware Accelerated: Brightness control doesn't work, and I have no info on the problem, feel free to share any logs/information you have about this

    • DisplayPort: Working

  • Touch:

    • Multi-touch: Working

    • Pen: Working, Input Detected as Pen Input

  • Bluetooth: Working

    • LE: Not Working in some cases, others it does, largely untested

  • Wi-Fi:

    Note: The default driver works fine for some, but not for others, to install the Marvell Driver, follow the instructions here: Link

    • A/B/G/N: Working

    • 2.4 GHz: Working

    • 5 GHz: Working

    • Promiscuous Mode: Not Working, Marvell drivers are to blame

  • Cameras:

    • Rear Camera: Working

    • Front Camera: Working

  • Sensors:

    • Ambient light sensor: Working (Many Distros don’t yet have auto-brightness configured, in many cases scripts like those found here are necessary: Link)

    • Accelerometer: Working (Many Distros don’t yet have rotation configured, in many cases scripts like those found here are necessary: Link)

    • Rotation Sensor: Working (Ubuntu 17.10 does, though many Distros don’t yet have rotation detection configured, in many cases scripts like those found here are necessary: Link)

    • Gyroscope: Working (Many Distros don’t yet have detection configured, in many cases scripts like those found here are necessary: Link)

  • Battery Status: Not Working - I have no info on the problem, feel free to share any logs/information you have about this

  • Power Management: Fully Working (but not near to as optimized as Windows), and gets just as hot as Windows does under a heavy CPU load

 

4th Generation Devices

 

Surface Pro 4 (2016):

  • CPU: Working, all aspects working as expected

  • NVMe PCIe Storage: Working

  • Sleep:

    • S1 (CPU Stops Executing Instructions): Working

    • S2 (CPU Powered Off): Working

    • S3 (Suspend to RAM, what most of you call "Sleep"): Not Working, S3 was replaced by “Connected Standby”, there is some debate about this because I can't find the source for the claim to follow, and I have been linked this so take it with a grain of salt until then. Connected Standby support in Linux would require every distro to near to rewrite every applet they build to support it – If you use it, it results in a device hang, most kernels (like Peter Hunt’s popular “Tiggerite” Kernel) disable S3 entirely.

    • S4 (Suspend to Disk, what most of you call "Hibernation"): Working: To disable suspend on systemd based systems (almsot all fo them) in favor of hibernate. Credits to /u/alraban for this method: sudo ln -s /usr/lib/systemd/system/hibernate.target /etc/systemd/system/suspend.target && sudo ln -s /usr/lib/systemd/system/systemd-hibernate.service /etc/systemd/system/systemd-suspend.service

  • USB: Working

  • SDXC Slot: Working (albeit detected as USB in most cases, not sure if this is an issue or not)

  • Buttons:

    • Power: Working

    • Volume Down: Working

    • Volume Up: Working

  • Video:

    • Integrated Intel Card: Working, Hardware Accelerated

    • DisplayPort: Working

  • Touch:

    • Multi-touch: Partially Working – It can be made to work. You can install a custom kernel that includes the experimental IPTS (Touch and Pen for Series 4 devices and above) driver. I personally recommend /u/JakeDay's kernel: here. Here is a link to reference Linux Kernel 4.9 repo Intel developed: Link.

    • Pen: Partially Working – It can be made to work. You can install a custom kernel that includes the experimental IPTS (Touch and Pen for Series 4 devices and above) driver. I personally recommend /u/JakeDay's kernel: here. Here is a link to the reference Kernel 4.9 repo Intel developed: Link.

  • Bluetooth: Working

    • LE: Not Working in most cases, in others it doesn't, largely untested

  • Wi-Fi:

    Note: The default driver works fine for some, but not for others, to install the Marvell Driver, follow the instructions here: Link

    • A/B/G/N: Working

    • 2.4 GHz: Working

    • 5 GHz: Working

    • Promiscuous Mode: Not Working, Marvell drivers are to blame

  • Cameras:

    • Rear Camera: Not Working (it is on a PCI bus instead of the typical USB bus as previous devices have had)

    • Front Camera: Not Working (it is on a PCI bus instead of the typical USB bus as previous devices have had)

  • Sensors:

    • Ambient light sensor: Working (Many Distros don’t yet have auto-brightness configured, in many cases scripts like those found here are necessary: Link)

    • Accelerometer: Working (Many Distros don’t yet have detection configured, in many cases scripts like those found here are necessary: Link)

    • Rotation Sensor: Working (Ubuntu 17.10 does, though many Distros don’t yet have rotation detection configured, in many cases scripts like those found here are necessary: Link)

    • Gyroscope: Working (Many Distros don’t yet have detection configured, in many cases scripts like those found here are necessary: Link)

  • Battery Status: Fully Working

  • Power Management: Fully Working (but not as optimized as Windows), and gets just as hot as Windows does under a heavy CPU load. There are reports of better battery life in Linux around this sub, though I myself don't experience it.

 

Surface Book (Standard & Performance Base):

  • CPU: Working, all aspects working as expected

  • NVMe PCIe Storage: Working

  • Sleep:

    • S1 (CPU Stops Executing Instructions): Working

    • S2 (CPU Powered Off): Working

    • S3 (Suspend to RAM, what most of you call "Sleep"): Not Working, S3 was replaced by “Connected Standby”, there is some debate about this because I can't find the source for the claim to follow, and I have been linked this so take it with a grain of salt until then. Connected Standby support in Linux would require every distro to near to rewrite every applet they build to support it – If you use it, it results in a device hang, most kernels (like Peter Hunt’s popular “Tiggerite” Kernel) disable S3 entirely.

    • S4 (Suspend to Disk, what most of you call "Hibernation"): Working: To disable suspend on systemd based systems (almsot all fo them) in favor of hibernate. Credits to /u/alraban for this method: sudo ln -s /usr/lib/systemd/system/hibernate.target /etc/systemd/system/suspend.target && sudo ln -s /usr/lib/systemd/system/systemd-hibernate.service /etc/systemd/system/systemd-suspend.service

  • USB: Working

  • SDXC Slot: Working (albeit detected as USB in most cases, not sure if this is an issue or not)

  • Buttons:

    • Power: Working

    • Volume Down: Working

    • Volume Up: Working

  • Video:

    • Integrated Intel Card: Working, Hardware Accelerated

    • dGPU: Not working – Not detected on any bus currently exposed to the Linux kernel, due to this, little to no research has been done

    • DisplayPort: Working

  • Touch:

    • Multi-touch: Not Working – It can be made to work. You can install a custom kernel that includes the experimental IPTS (Touch and Pen for Series 4 devices and above) driver. I personally recommend /u/JakeDay's kernel: here. Here is a link to reference Linux Kernel 4.9 repo Intel developed: Link.

    • Pen: Not Working – It can be made to work. You can install a custom kernel that includes the experimental IPTS (Touch and Pen for Series 4 devices and above) driver. I personally recommend /u/JakeDay's kernel: here. Here is a link to the reference Kernel 4.9 repo Intel developed: Link.

  • Bluetooth: Working

    • LE: Not Working in most cases, in others it doesn't, largely untested

  • Wi-Fi:

    Note: The default driver works fine for some, but not for others, to install the Marvell Driver, follow the instructions here: Link

    • A/B/G/N: Working

    • 2.4 GHz: Working

    • 5 GHz: Working

    • Promiscuous Mode: Not Working, Marvell drivers are to blame

  • Cameras:

    • Rear Camera: Not Working (it is on a PCI bus instead of the typical USB bus as previous devices have had)

    • Front Camera: Not Working (it is on a PCI bus instead of the typical USB bus as previous devices have had)

  • Sensors:

    • Ambient light sensor: Working (Many Distros don’t yet have auto-brightness configured, in many cases scripts like those found here are necessary: Link)

    • Accelerometer: Working (Many Distros don’t yet have detection configured, in many cases scripts like those found here are necessary: Link)

    • Rotation Sensor: Working (Ubuntu 17.10 does, though many Distros don’t yet have rotation detection configured, in many cases scripts like those found here are necessary: Link)

    • Gyroscope: Working (Many Distros don’t yet have detection configured, in many cases scripts like those found here are necessary: Link)

  • Battery Status: Fully Working

  • Power Management: Fully Working (but not near to as optimized as Windows), and gets just as hot as Windows does under a heavy CPU load

 

Surface Studio:

  • Entirely Untested

 

5th Generation Devices

 

Surface Pro (2017):

  • CPU: Working, all aspects working as expected

  • NVMe PCIe Storage: Working

  • Sleep:

    • S1 (CPU Stops Executing Instructions): Working - Just by user report as of now. No sleep logs to verify.

    • S2 (CPU Powered Off): Working - Just by user report as of now. No sleep logs to verify.

    • S3 (Suspend to RAM, what most of you call "Sleep"): Not Working, S3 was replaced by “Connected Standby”, there is some debate about this because I can't find the source for the claim to follow, and I have been linked this so take it with a grain of salt until then. Connected Standby support in Linux would require every distro to near to rewrite every applet they build to support it – If you use it, it results in a device hang, most kernels (like Peter Hunt’s popular “Tiggerite” Kernel) disable S3 entirely.

    • S4 (Suspend to Disk, what most of you call "Hibernation"): Working: To disable suspend on systemd based systems (almsot all fo them) in favor of hibernate. Credits to /u/alraban for this method: sudo ln -s /usr/lib/systemd/system/hibernate.target /etc/systemd/system/suspend.target && sudo ln -s /usr/lib/systemd/system/systemd-hibernate.service /etc/systemd/system/systemd-suspend.service

  • USB: Working

  • SDXC Slot: Working (albeit detected as USB in most cases, not sure if this is an issue or not)

  • Buttons:

    • Power: Working (if long pressed)

    • Volume: Not working

  • Video:

    • Integrated Intel Card: Working, Hardware Accelerated - Some tearing is reported on most distros

    • DisplayPort: Working

  • Touch:

    • Multi-touch: Not Working – It can be made to work. You can install a custom kernel that includes the experimental IPTS (Touch and Pen for Series 4 devices and above) driver. I personally recommend /u/JakeDay's kernel: here. Here is a link to reference Linux Kernel 4.9 repo Intel developed: Link.

    • Pen: Not Working – It can be made to work. You can install a custom kernel that includes the experimental IPTS (Touch and Pen for Series 4 devices and above) driver. I personally recommend /u/JakeDay's kernel: here. Here is a link to the reference Kernel 4.9 repo Intel developed: Link.

  • Bluetooth: Working

    • LE: Not Working in most cases, in others it doesn't, largely untested

  • Wi-Fi:

    Note: The default driver works fine for some, but not for others, to install the Marvell Driver, follow the instructions here: Link

    • A/B/G/N: Working

    • 2.4 GHz: Working

    • 5 GHz: Working

    • Promiscuous Mode: Not Working, Marvell drivers are to blame

  • Cameras:

    • Rear Camera: Not Working (it is on a PCI bus instead of the typical USB bus as previous devices have had)

    • Front Camera: Not Working (it is on a PCI bus instead of the typical USB bus as previous devices have had)

  • Sensors:

    • Ambient light sensor: Working (Many Distros don’t yet have auto-brightness configured, in many cases scripts like those found here are necessary: Link)

    • Accelerometer: Working (Many Distros don’t yet have detection configured, in many cases scripts like those found here are necessary: Link)

    • Rotation Sensor: Working (Ubuntu 17.10 does, though many Distros don’t yet have rotation detection configured, in many cases scripts like those found here are necessary: Link)

    • Gyroscope: Working (Many Distros don’t yet have detection configured, in many cases scripts like those found here are necessary: Link)

  • Battery Status: Partially Working - It is not showing up in the typical sysfs-nodes (which is very odd)

  • Power Management: Fully Working (but not near to as optimized as Windows), and gets just as hot as Windows does under a heavy CPU load

 

Surface Book 2 (NVidia 1050M & NVidia 1070M Models):

  • CPU: Working, all aspects working as expected

  • NVMe PCIe Storage: Working

  • Sleep:

    • S1 (CPU Stops Executing Instructions): Working

    • S2 (CPU Powered Off): Working

    • S3 (Suspend to RAM, what most of you call "Sleep"): Not Working, S3 was replaced by “Connected Standby”, there is some debate about this because I can't find the source for the claim to follow, and I have been linked this so take it with a grain of salt until then. Connected Standby support in Linux would require every distro to near to rewrite every applet they build to support it – If you use it, it results in a device hang, most kernels (like Peter Hunt’s popular “Tiggerite” Kernel) disable S3 entirely.

    • S4 (Suspend to Disk, what most of you call "Hibernation"): Working: To disable suspend on systemd based systems (almsot all fo them) in favor of hibernate. Credits to /u/alraban for this method: sudo ln -s /usr/lib/systemd/system/hibernate.target /etc/systemd/system/suspend.target && sudo ln -s /usr/lib/systemd/system/systemd-hibernate.service /etc/systemd/system/systemd-suspend.service

  • USB: Working

  • SDXC Slot: Working (albeit detected as USB in most cases, not sure if this is an issue or not)

  • Buttons:

    • Power: Working

    • Volume Down: Working

    • Volume Up: Working

  • Video:

    • Integrated Intel Card: Working, Hardware Accelerated

    • dGPU: Working (both NVidia 1050M & NVidia 1070M models) - Using the NVidia driver, bumblebee can be used to change which GPU is being used

    • DisplayPort: Working

  • Touch:

    • Multi-touch: Not Working – It can be made to work. You can install a custom kernel that includes the experimental IPTS (Touch and Pen for Series 4 devices and above) driver. I personally recommend /u/JakeDay's kernel: here. Here is a link to reference Linux Kernel 4.9 repo Intel developed: Link.

    • Pen: Not Working – It can be made to work. You can install a custom kernel that includes the experimental IPTS (Touch and Pen for Series 4 devices and above) driver. I personally recommend /u/JakeDay's kernel: here. Here is a link to the reference Kernel 4.9 repo Intel developed: Link.

  • Bluetooth: Working

    • LE: Not Working in most cases, in others it doesn't, largely untested

  • Wi-Fi:

    Note: The default driver works fine for some, but not for others, to install the Marvell Driver, follow the instructions here: Link

    • A/B/G/N: Working

    • 2.4 GHz: Working

    • 5 GHz: Working

    • Promiscuous Mode: Not Working, Marvell drivers are to blame

  • Cameras:

    • Rear Camera: Not Working (it is on a PCI bus instead of the typical USB bus as previous devices have had)

    • Front Camera: Not Working (it is on a PCI bus instead of the typical USB bus as previous devices have had)

  • Sensors:

    • Ambient light sensor: Working (Many Distros don’t yet have auto-brightness configured, in many cases scripts like those found here are necessary: Link)

    • Accelerometer: Working (Many Distros don’t yet have detection configured, in many cases scripts like those found here are necessary: Link)

    • Rotation Sensor: Working (Ubuntu 17.10 does, though many Distros don’t yet have rotation detection configured, in many cases scripts like those found here are necessary: Link)

    • Gyroscope: Working (Many Distros don’t yet have detection configured, in many cases scripts like those found here are necessary: Link)

  • Battery Status: Fully Working

  • Power Management: Fully Working (but not near to as optimized as Windows), and gets just as hot as Windows does under a heavy CPU load

 

Surface Laptop:

  • CPU: Working, all aspects working as expected

  • NVMe PCIe Storage: Working

  • Sleep:

    • S1 (CPU Stops Executing Instructions): Working - Just by user report as of now. No sleep logs to verify.

    • S2 (CPU Powered Off): Working - Just by user report as of now. No sleep logs to verify.

    • S3 (Suspend to RAM, what most of you call "Sleep"): Not Working, S3 was replaced by “Connected Standby”, there is some debate about this because I can't find the source for the claim to follow, and I have been linked this so take it with a grain of salt until then. Connected Standby support in Linux would require every distro to near to rewrite every applet they build to support it – If you use it, it results in a device hang, most kernels (like Peter Hunt’s popular “Tiggerite” Kernel) disable S3 entirely.

    • S4 (Suspend to Disk, what most of you call "Hibernation"): Working: To disable suspend on systemd based systems (almsot all fo them) in favor of hibernate. Credits to /u/alraban for this method: sudo ln -s /usr/lib/systemd/system/hibernate.target /etc/systemd/system/suspend.target && sudo ln -s /usr/lib/systemd/system/systemd-hibernate.service /etc/systemd/system/systemd-suspend.service

  • USB: Working

  • SDXC Slot: Working (albeit detected as USB in most cases, not sure if this is an issue or not)

  • Buttons:

    • Power: Working

  • Video:

    • Integrated Intel Card: Working, Hardware Accelerated - Some tearing is reported on most distros

    • DisplayPort: Working

  • Touch:

    • Multi-touch: Not Working – It can be made to work. You can install a custom kernel that includes the experimental IPTS (Touch and Pen for Series 4 devices and above) driver. I personally recommend /u/JakeDay's kernel: here. Here is a link to reference Linux Kernel 4.9 repo Intel developed: Link.

    • Pen: Not Working – It can be made to work. You can install a custom kernel that includes the experimental IPTS (Touch and Pen for Series 4 devices and above) driver. I personally recommend /u/JakeDay's kernel: here. Here is a link to the reference Kernel 4.9 repo Intel developed: Link.

  • Bluetooth: Working

    • LE: Not Working in most cases, in others it doesn't, largely untested

  • Wi-Fi:

    Note: The default driver works fine for some, but not for others, to install the Marvell Driver, follow the instructions here: Link

    • A/B/G/N: Working

    • 2.4 GHz: Working

    • 5 GHz: Working

    • Promiscuous Mode: Not Working, Marvell drivers are to blame

  • Cameras:

    • Front Camera: Not Working (it is on a PCI bus instead of the typical USB bus as previous devices have had)

  • Sensors:

    • Ambient light sensor: Working (Many Distros don’t yet have auto-brightness configured, in many cases scripts like those found here are necessary: Link)

    • Accelerometer: Working (Many Distros don’t yet have detection configured, in many cases scripts like those found here are necessary: Link)

    • Rotation Sensor: Working (Ubuntu 17.10 does, though many Distros don’t yet have rotation detection configured, in many cases scripts like those found here are necessary: Link)

    • Gyroscope: Working (Many Distros don’t yet have detection configured, in many cases scripts like those found here are necessary: Link)

  • Battery Status: Fully Working

  • Power Management: Fully Working (but not near to as optimized as Windows), and gets just as hot as Windows does under a heavy CPU load

 

Specialty Devices

 

Surface Hub:

  • Entirely Untested

 

Common Peripherals:

  • DRM: Yes, but you need to install a Flash DRM HAL in most cases – Link

 

  • Surface Docks:

    • Surface Pro 3 Dock: Working – All Outputs, must be attached pre-kernel initialization (i.e. during GRUB) to function correctly. If connected while booted, very few of the peripherals work (no video out from dock, graphical corruption, etc.) and it can result in soft-lockups. Unplugging it while live results in similar issues and frequent video corruption.

    • Surface Series-4 Dock (The Brick): Working – All Outputs,  

  • Surface Pens:

    • Wacom (Series 1 & 2) Pen: Partially Working, pressure sensitivity works on Series 1 & 2 devices (obviously, Wacom pens don’t work on Series 3 and above, as Microsoft moved to their newly acquired N-Trig Digitizers), unfortunately, the right click button doesn’t work

    • N-Trig Series 3 Pen: Working, pressure sensitivity works on Series 3, 4, & 5 devices (obviously, N-Trig pens don’t work on Series 2 and below, as Microsoft moved to their newly acquired N-Trig Digitizers as of Series 3), unfortunately, neither the left or right click buttons work, though, with some special key mappings, and having the pen paired via Bluetooth, you can configure the eraser button to do what you’d like (I don’t have my source for this, but know for 100% it is possible)

    • N-Trig Series 4 Pen (All Colors): Working, pressure sensitivity works on Series 3, 4, & 5 devices (obviously, N-Trig pens don’t work on Series 2 and below, as Microsoft moved to their newly acquired N-Trig Digitizers as of Series 3), unfortunately, the right click button doesn’t work, though, with some special key mappings, and having the pen paired via Bluetooth, you can configure the eraser button to do what you’d like (I don’t have my source for this, but know for 100% it is possible, though I’ve only seen it in action on Series 3 Pens)

    • N-Trig Series 5 Pen (All Colors, 2017 - The new one designed with tilt in mind): Working, pressure/tilt sensitivity works on Series 3, 4, & 5 devices (obviously, N-Trig pens don’t work on Series 2 and below, as Microsoft moved to their newly acquired N-Trig Digitizers as of Series 3), unfortunately, the right click button doesn’t work, though, with some special key mappings, and having the pen paired via Bluetooth, you can configure the eraser button to do what you’d like (I don’t have my source for this, but know for 100% it is possible, though I’ve only seen it in action on Series 3 Pens)

 

  • Surface Dial: Not Working – Bluetooth pairs successfully, but there are no key-mappings for it, and none of the functions are natively detected, also, onscreen functions also don’t work.

 

  • Surface Covers

    • Type Cover 1: Working, with touchpad Multi-Touch

    • Touch Cover 1: Working, with touchpad Multi-Touch

    • Power Cover: Working, with touchpad Multi-Touch

    • Music Cover: Not Working, Device ID's are not in the Linux kernel, please report them. Also, there are no Linux key-mappings for it, so someone will need to make one of those as well.

    • Type Cover 2: Working, with touchpad Multi-Touch

    • Touch Cover 2: Working, with touchpad Multi-Touch

    • Type Cover 3: Working, with touchpad Multi-Touch

    • Type Cover 3 (for Surface 3): Working, with touchpad Multi-Touch

    • Type Cover 4: Partially Working, touchpad Multi-Touch works, and sometimes detaching/re-attaching results in a buggy experience, little to no debugging has been done on the issue

    • Type Cover 4 (with Biometric Reader): Partially Working, touchpad Multi-Touch works, the state of the biometric sensor is unknown, I recall hearing that it works, but I can’t find my source, regardless, no distro ships with full support for it, also, sometimes detaching/re-attaching results in a buggy experience, little to no debugging has been done on the issue

    • Surface Book Base: Working, touchpad Multi-Touch works, NVidia 940M is not detected on any bus or usable in its current state

    • Surface Book Performance Base: Working, touchpad Multi-Touch works, NVidia 965M is not detected on any bus or usable in its current state

    • Surface Book 2 Base (NVidia 1050M & NVidia 1070M versions): Working, touchpad Multi-Touch works, NVidia dGPU's work with the NVidia driver (bumblebee can be used to switch cards)

    • Type Cover (2017): Partially Working, touchpad Multi-Touch works, sometimes detaching/re-attaching results in a buggy experience, little to no debugging has been done on the issue. The keyboard itself does not work. This is almost certainly remediable by adding the device ID's into the Linux kernel, so, please report the device ID's (and please differentiate your model of Type Cover (i.e. with Biometrics, without Biometrics, Signature, etc.)

    • Surface Laptop Integrated Keyboard/Trackpad: Partially Working, touchpad Multi-Touch works, the keyboard itself does not work. This is almost certainly remediable by adding the device ID's into the Linux kernel, so please report the device ID's.


r/SurfaceLinux • • 28d ago

Guide i built swipe typing for touchscreen KDE devices :)

108 Upvotes

thought some of y'all might appreciate :)


r/SurfaceLinux • • Jun 14 '26

Discussion Surface Pro 11 🥵

Post image
107 Upvotes

Finally freed my SP11 from bloated Windows!
Installed with Ubuntu 26.04 arm64

The process was brutal and time consuming, and honestly there’s still a ton of work left. I got here mostly with AI’s help since I have zero knowledge about DKMS or kernel modules — so don’t roast me too hard 😅

I also want to apologize for not being able to credit the sources that directly helped make this happen.

Not a native English speaker btw, so sorry if things are unclear. Also, Reddit is blocked in my country, so I’ll do my best to reply whenever I can!

Stuff I’m still stuck on:
- Random color glitches (sometimes)— a weird pink tint that shifts dynamically with the screen content, especially after locking the screen
- Can’t get an external display to work via Thunderbolt
- Audio works, but still not as good as on Windows

Any help or tips would be appreciated! 🙏


r/SurfaceLinux • • Oct 08 '26

IDEA Touchscreen UI is coming along with Hyprland + HyprGrass + Gentoo

104 Upvotes

I've been working on cobbling together a functional UI with a neat touchscreen capable workflow.

Let me know what you all think.


r/SurfaceLinux • • Jul 26 '24

Discussion Fedora 40 runs perfectly on the Surface Pro 7

Post image
104 Upvotes

Only thing I’ve found not working is the usual webcam problem


r/SurfaceLinux • • Jun 16 '25

Discussion Fedora Workstation 42 on Surface Go 2

Post image
103 Upvotes

First of all, I'm just new to Linux, a noob for sure. I apologize for the lack of exact technical terms.

Got fed up with Windows 11 making this device slow even at web browsing. So, I decided to fully install Fedora Workstation 42.

My Go 2's specs:

-64GB eMMC storage

-64GB RAM

During the live testing on an HDD, Fedora seemed to be so slow and laggy, and lacks support for the touchpad. But I still decided to fully install it (I have a backup of my Windows 11 in a separate external HDD). Did the updates and it was working very smoothly.

Pros:

  1. Smoother web browsing without lag

  2. (May be a placebo) Better battery

  3. Scrolling and navigating through the entire UI is exceptionally fast compared with Windows'.

  4. The UI is very beautiful. I love the gestures.

Cons:

  1. The boot is way slower than Windows' (15 seconds of Win11 compared with 35-45 seconds with Fedora).

  2. Touchpad's multitouch gestures sometimes doesn't work. I have to restart the device to make it work.

  3. I have read in other posts/ Linux subreddits about the issue in fast scroll.

Maybe I'll try other distro to find the perfect fit for my Go 2, so far my main concern is the slower boot time.


  • I used Ventoy to make a bootable USB drive. Rufus doesn't seem to work in my case.


r/SurfaceLinux • • May 20 '26

Discussion Surface Pro 5 (Core M) with Ubuntu 26.04

Post image
102 Upvotes

Using it for about a week, it’s awesome.


r/SurfaceLinux • • 8d ago

Discussion Surface Duo - Hidden Gem

Thumbnail gallery
100 Upvotes

I think big Companies should give buyers full access to the hardware after dropping support for it. Otherwise, it’s just a huge eWaste. People should generally have the choice to run whatever operating system they want on a device they’ve already paid for production.

The Duo first generation is a device which feels kind of forbidden by the capabilities it can do.

I think, this is the perfect cyberdeck. It’s better than a raspberry pi. Its the best PocketPC.


r/SurfaceLinux • • 26d ago

Solved Finally Fixed My Surface!

Post image
95 Upvotes

r/SurfaceLinux • • Jul 04 '26

Discussion Android surface pro 11

Post image
92 Upvotes

I've seen a few people recently running Linux on the surface pro 11, so I figured I'd show off something a bit different: LineageOS 23.2 running natively on my Surface Pro 11(Snapdragon x elite). As far as I'm aware I'm the first person to publicly get android running on the snapdragon x elite. This is very much a proof of concept and still pretty buggy. I'm not super experienced with ROM development, so if anyone here knows more than me and wants to help improve it, I'm happy to post the source.

What's working so far:

- WiFi

- Bluetooth

- Touch/pen

- Keyboard/trackpad

- Sleep/wake

You might be wondering why bother porting Android to a Surface Pro in the first place. Honestly, I think the Surface Pro has the hardware to be the ultimate Android tablet, windows really just isn't a great experience on tablets.


r/SurfaceLinux • • Sep 21 '26

Solved Ubuntu 26 in Surface

Post image
91 Upvotes

Surface Laptop Go 2


r/SurfaceLinux • • 23d ago

Discussion 7.2 is out :-)

Thumbnail
github.com
90 Upvotes

r/SurfaceLinux • • Apr 25 '20

Discussion Just updated my Surface Go to Ubuntu 20.04 and it's (almost) the perfect Linux tablet

Post image
90 Upvotes

r/SurfaceLinux • • Mar 27 '26

Guide Setting up Gnome DE for tablet experience.

89 Upvotes

I have had my SP7 for over 3 years and it has always been riddled with 30 fps animations, overheating & constantly running out of memory while i was using Win11.

Over the past few weeks i just had enough and set out to create the most usable tablet for me, my typecover broke a year ago - so the goal was to make everything touch based.

below are my findings which i hope will help some of you as you make the switch to the penguin.

  1. Does not really matter which distro you choose, i recommend you choose the one you are most familiar with.

    • I chose arch just because i am familiar with it and chose EndeavourOS because i like graphical installers and it sets up an excellent baseline for you to tinker around with.

  2. Highly recommend Gnome DE as your desktop environment, once everything is set up, you install the below list of extensions to recreate the usage in my video.

    1. TouchUp -

      • Gives you ability to have either a gesture bar or navigation bar at the bottom of the screen

      • Single swipe gestures on the desktop to switch workspaces/ get to workspaces view & to the app view.

      • Swipe up from Workspaces view to close applications.

    2. Dash to Panel -

      • Gnome panel customization (top bar) - makes it much easier to reach the pinned apps.

    3. Screen Rotate -

      • Screen autorotation was so janky for me, sometimes it works, sometimes it refuses to show up. This extension fully fixes it.

    4. GJS OSK -

      • a better on screen keyboard. The stock gnome keyboard is serviceable, but if you try to do anything other than type in a website or a search query - you'll find it extremely limiting.

      • worth noting that, the TouchUp extension adds some nice to haves to the gnome builtin OSK like key popups and is more than enough for minor usage, but GJS OSK gives you plenty of layouts.

The below are just for eye candy and not essential for the workflow;

  1. User Themes

  2. Status Area Horizontal Spacing

  3. Weather O'clock

  4. Blur My shell

  5. AppIndicator and KStatusNotifierItem Support

--- Further Notes ---

Other DE's;

  • KDE Plasma - Close second choice, will be more suited if you have the typecover.

  • Phosh - Gnome shell but designed for mobile Linux OS' - Works well but the scope is too limiting for our hardware.

  • Plasma Mobile - Similar to phosh, you may find more bugs.

Other OS';

  • BlissOS (Android x86 native OS)

    • native android OS for surface. it was the best "tablet experience" for obvious reasons but it had severe ghost touches/ double touch issues for me - making it completely unusable for daily use. if i could have settled i would have, but it was just making it impossible to use the tablet. They are currently in lockdown preparing for next major release I really look forward to it.

  • BrunchOS (ChromeOS Flex with Android apps)

    • its ChromeOS basically, and works well enough with touch screen. the user experience is really good for day to day usage. But it was causing me severe battery drain and overheating when i run android apps.

Misc;

  • Linux Surface is a mandatory regardless of which distro you choose to install. They have an excellent Install Guide for each distro & check out their Feature Matrix to see what works and what does not work for your Surface device.

    • one exception here is that if you install Nobara Linux, the Linux Surface kernel comes pre patched during installation and you need not do it manually. But nobara prioritizing gaming, so you may need to either manually uncheck items during installation process or uninstall many stuff post installation. - Its easier to just install the linux-surface kernel on a distro of your choice.

  • For me the Camera does not work in any of the distros, this is a documented limitation for the Surface Pro 7.

  • Microsoft Edge is the best browser i found which works well with touch in Linux, this is completely personal preference.

    • It gives you proper swipe gestures to go back & forward (brave browser had a back gesture but not forward if i remember correctly)

    • Additional gestures can be defined according to your needs using the "Mouse gestures" setting.

    • you have an option to turn on context menu the moment you select something on the webpage (to allow you to copy it easily) - whereas other browsers require you to select then long press to bring up the context menu.

    • It does take like 10 minutes to set up; you have to go through each individual menu option and uncheck all of the data collection and telemetry stuff + Copilot features - but they can be turned off completely if you do not use MS edge sync.

  • Waydroid works really well and does not eat away system resources when running normal apps.

  • The floating pill on the screen is something i used chatgpt codex to make, its highly experimental but functionable - it emulates some shortcuts such as back/forward/appslauncher/workspaces view etc , if you know what you're doing you can find it at https://github.com/PickleHik3/gnome-extensions-touchnav