r/StructuralBiology • • Nov 16 '25

Did I break physics?

0 Upvotes

To try and limit the number of pedantic self-described scientists coming here to post insults: I obviously did not break physics. I am pointing to the fact that I have an image of what appears to be a Coulombic potential map that matches surprisingly well with the 2D classes of the same sample. Two interesting points are the scale difference between the 2D classes and the projected image (~1x107) and the fact that the image is produced using light in the 400 nm range. The scale of the features resolved in the 2D classes are well beyond the Nyquist limit for light of that wavelength. So, I thought some would find it interesting that such an image can be made using a $20 laser and a mirror.

Laser projection of sample's diffraction pattern was focused using a concave lens. 2D classes for comparison.


r/StructuralBiology • • Feb 26 '25

In-silicon protein simulation question

Post image
2 Upvotes

I think this is the correct answer since it seems like what seems like beta sheets in red is in an extra cellular domain (outside of the phospholipid bilayer). Also, I think it's a membrane receptor since the alpha helices are embedded into the bilayer. I was wondering if you think it looks right? I'm not sure about the other 2 statements though. Thank you!


r/StructuralBiology • • Aug 16 '26

[Tool] Browser-based structure viewer with docking and ADMET attached — would like structural biologists to tell me what's wrong with it

0 Upvotes

Disclosure: I'm on the team that builds this.

It's a WebGL viewer (3Dmol) that loads either an experimental RCSB structure or the AlphaFold DB model for a UniProt accession, with pLDDT colouring, chain/secondary-structure modes, surface, and an active-site view that focuses the pocket around a detected ligand. Nothing to install and no account needed for the demo.

The part that's less common: the viewer isn't standalone. The same target carries into docking (ranked poses, affinity + RMSD), ADMET risk bands and PK/PD, so you can go from a structure to a scored candidate without re-entering it anywhere.

Research use only, and I'd rather say so up front: predicted affinities are computational estimates, not evidence of activity.

Demo: https://pi.extn.ai → "Explore live demo" (read-only, no signup)

Specifically what I'm asking: is the pLDDT colouring and the active-site selection doing anything you'd consider misleading, and what would you need before this was worth opening instead of PyMOL or ChimeraX? I don't expect it to replace either — I want to know where it's actively wrong.


r/StructuralBiology • • Dec 05 '25

Help needed: Full structure elucidation from NMR (¹H, ¹³C, COSY, HSQC, HMBC) + IR/UV/MS

0 Upvotes

Hi! I’m looking for someone who knows about NMR analysis and organic structure elucidation.

I have raw data files for:

• ¹H NMR

• ¹³C NMR

• COSY

• HSQC

• HMBC

Plus IR, UV and MS spectra.

I need:

• Processing of the raw NMR data

• Peak picking, integration, coupling assignment

• Full spectral interpretation

• *Structure elucidation* (or justified candidate structures)

Please send me a DM..


r/StructuralBiology • • May 16 '26

What repetitive structural biology/computational workflow do you wish you could automate?

1 Upvotes

I’ve been thinking a lot lately about how many small repetitive tasks eat up time in structural biology/computational workflows, especially the things that aren’t “hard science” but still somehow take hours every week.

Things like:

  • file conversions/cleanup

  • repetitive PyMOL scripting

  • structure preprocessing

  • batch analyses

  • figure generation

  • parsing messy outputs

  • chain renumbering

  • trajectory analysis

  • moving data between incompatible tools

Curious what people here find most annoying or time-consuming in their day-to-day work.


r/StructuralBiology • • Apr 18 '25

PhD Hiring/Networking Pain Points

3 Upvotes

Hi All,

I'm looking to connect with recruiters and hiring managers to see what sort of pain points they are having with recruiting PhDs. And to see what they would see as the perfect path for hiring and networking with PhDs from resume/CV submission to the on boarding process.

I am only here to help.


r/StructuralBiology • • Mar 04 '25

Structure refinement

3 Upvotes

I modelled a protein using trRosetta since no homologous templates are not available. I did find some homologs with >40% identity but they were covering the c terminal region but my interest is in n terminal which is not covered by the templates i found. Hence I went for protein structure prediction using trRosetta. Now the problem is that when I'm validating tye structure using SAVES, in verify3d only 56% residues are passing but verify3d requires atleast 80%. So how can i refine the model. Also my protein has intrinsically disordered regions specially the region I'm checking its interaction with other protein. How should i proceed from here?


r/StructuralBiology • • Mar 24 '25

About to start my PhD studying Structural Biology and lost in terms of "Industry"

4 Upvotes

This August I will start my Biochemistry, Biophysics, and Structural Biology PhD at a R1 institution. I previously thought I would want to go into academia but now am interested in learning more about what a job in structural biology industry looks like. Whats the demand? Do these positions typically specialize in one or two techniques (like cryoEM or crystallography) or do they actively use a large set of their toolbox skills? Where do I go to find job listings for these positions to get a better idea of the marker? Job security? I ask all of these questions with hopes to tailer my PhD experience to these goals


r/StructuralBiology • • Mar 07 '25

Thoughts on "reverse" nanobodies?

4 Upvotes

This paper makes the extraordinary claim that creating a protein from the C-->N sequence of a nanobody creates a functionally identical protein to the N-->C version.
There is zero evidence for this on the paper, and the lamin staining looks completely different for their probe versus a standard nanobody.


r/StructuralBiology • • Feb 18 '26

Cryo-EM Learning Stratergy

4 Upvotes

I am a masters student with expertise in protein expression, purification, little bit biochemical techniques and macro molecular crystallography mainly just crystallizing protein sample (screening to optimization but haven't solved any structure yet).

I want to work on macromolecular complexes involved in DNA damage repair. I am looking for stratergy to switch to Cryo-EM and Cryo-ET from crystallography since it might not be a suitable approach for large complexes.

Should I move forward as a PhD and learn during this period or maybe get expertise in Cryo-EM laboratories as project assistant and move onto PhD with more complex projects.


r/StructuralBiology • • Apr 14 '25

Basic construct image software?

Post image
2 Upvotes

I am looking for a software that can make these kinds of figures with colored domains/regions and some basic annotation. Is there a software out there that does this, or an approach to do it in R or python? Thanks!


r/StructuralBiology • • May 03 '25

What is the latest in terms of Structural Imaging/Determination

3 Upvotes

Hello all, new to the group. I studied Cellular Biology at undergrad and loved my structural biology course and have been thinking about advancement that might have happened since then. Back during my undergrad (10 years ago), all structures were determined by either X-ray or Cryo-EM, both of which involve fixing/freezing the protein somehow (in my understanding?). What is the latest these days? Have we advanced at all in being able to gain structural insights of proteins in a more nascent state? Like do we have any imaging modalities that visualise proteins still suspended in unfrozen fluid?

I hope that makes some sense to someone... I am doing hobby research project in Protein Folding and am desperate to know answers!


r/StructuralBiology • • Sep 23 '25

Labs for PhD

2 Upvotes

Hello! I am considering R1 universities in USA for my PhD and I’m leaning towards structural/computational biology. I don’t have a lot of experience besides good ol’ molecular docking using autodock but I will be joining a lab in my current masters program for a few months that specialises in structural/computational biology. My current work is with my professor looking at the chemistry of xenoestrogens and their binding in ER-alpha.

I’ve looked at UMass Amherst and BostonU (I love the cold climate) and shortlisted a couple of labs in there (specialising in protein folding and functioning of GPCRs) but I wanted to know more universities that are well known for their work in the community! I have a bachelors in biochemistry and a masters in biotechnology. Hope you guys can give me some insight/advice!


r/StructuralBiology • • May 15 '26

Big Update to StructureViewer: PDB, CIF, XYZ, SDF Support + Cleaner 3D Reddit Previews

Thumbnail reddit.com
3 Upvotes

r/StructuralBiology • • Sep 07 '26

Morning at the park

Post image
20 Upvotes

Just thought iId explore whether I can draw a simple protein structure with chalk. I think it turned out pretty well!


r/StructuralBiology • • Oct 08 '25

Favourite Research

2 Upvotes

Hello people! I wanted to ask you all what’s some research that you find absolutely fascinating/can’t wait to tell people about? Or what’s some research that you think deserves more attention?


r/StructuralBiology • • Oct 07 '26

Cryo-EM structure of an AI-designed anti-KRAS G12V VHH matches the design model to 0.93 Å Cα RMSD

Thumbnail
reddit.com
3 Upvotes

r/StructuralBiology • • Feb 28 '25

Discriminating between models for deposition

3 Upvotes

Hello everyone !
I have two atomic models that I built from the same cryoEM electron density map, but Im uncertain which is the better one. One of them has better Molprobity values (clash score of 5, almost no rotamer outliers, no bond angle problems, 1.5% cablam outliers) but a slightly worse correlation to the data (cc(mask)= 0.73; CC(mainchain=0.76). The other one, on the contrary, has not so good MolProbity values: 3 bond angle outliers, clash score of 7.9, 2% of rotamer outliers, 2% cablam outliers ; but it has better orerlation to the electron density map (CC(mask)= 0.76, CC(maintain) 0.77). Which one is the better model ? which of them should I deposit on the PDB ?


r/StructuralBiology • • Aug 06 '21

Role of MeCP2 in Rett syndrome a neurological disease. A new publication from our lab - MeCP2 is a microsatellite binding protein that protects CA repeats from nucleosome invasion

Thumbnail
science.sciencemag.org
3 Upvotes

r/StructuralBiology • • Apr 21 '21

Welcome back

1 Upvotes

Hello! structural biologists, this sub reddit is active again and looking forward to see some constructive posts/discussions related to structural biology


r/StructuralBiology • • Apr 21 '21

Welcome all! crystal symmetry of 6BDG, P6(1) symmetry

Post image
7 Upvotes

r/StructuralBiology • • Jul 17 '12

Phenix version 1.8 now available

Thumbnail
phenix-online.org
3 Upvotes

r/StructuralBiology • • Nov 27 '24

Sketchnote about the role of UV radiation in cataract formation

Thumbnail bio-mat-sketches-mor.blogspot.com
1 Upvotes

Briony Yorke (Leeds, UK) gave a talk at University of Glasgow about time resolved X-ray crystallography used to assess UV damage of crystallins (eye lens proteins-yours are as old as you are)

l


r/StructuralBiology • • Dec 05 '24

How to determine which PDB structure to choose among multiple entries for same protein?

3 Upvotes

I want to use SARS-CoV-2 spike protein for structural analysis. When I search RCSB website, I am offered with thousands of structures. After doing some filter, I came across two structures (6XR8, 6VXX) which are the best of what I want. I am looking for closed (pre-fusion) conformation. 6VXX is cited in more research publications (may be due to the structure being published earlier), but it has five point mutations and represents sequence from 14-1211. 6XR8 on the other hand has no mutations and covers sequence from 1-1273 but cited in fewer publications. How to determine which one to use?