r/SteamFrame • • 6h ago

Accessories Steam Frame Charging Stand v1.5

102 Upvotes

The community gave great feedback about my 3D printed Steam Frame Stand in my last post[0], and I've been working on improvements since then.

For those who didn't see the first post, the stand works as a wall mount or a desk stand and also holds the controllers and has a cubby for other storage (such as the microfiber cloth).

Here are the updates based on the feedback:

  • Added a plug in charger version with a hook for a USB cord for those who don't want to use the magnetic USB adapter.

  • Ergo Strap support: It now works better with Valve's official ergo straps. I finally got my own ergo kit, so I was able to test it.

  • Double AA battery storage: slots for 2 AA batteries for when the controllers die.

  • Other adjustments to improve print quality.

I invested a bunch of time into this (probably too much lol), so I'm happy for any further feedback about what I can improve.

I have plans for a whole "Frame Kit" including ergo comfort grips that don't cover the IR sensors (almost done with those), a controller holder that mounts to a desk, an alternative top flexible strap, alternative grip straps, and a few more stretch goals like a rechargeable controller mod and a rigid strap. Wish me luck!

I'm currently only selling the stand on Etsy if you'd like to support the project: https://sculptedinnovations.etsy.com/listing/4593486035/steam-frame-magnetic-charging-stand-for

[0] https://www.reddit.com/r/SteamFrame/comments/1x7x82d/3d_printed_charging_stand_for_steam_frame_any/


r/SteamFrame • • 11h ago

Discussion F1 MultiViewer in VR on Steam Frame

Thumbnail
gallery
105 Upvotes

Spent some time today hacking on my Steam Frame and was able to get MultiViewer working in VR, with floating windows you can resize and place in 3D space. Video can be slightly choppy, but I am still tinkering. Definitely some optimizations that can be made, as I have a bunch of Chromium flags disabled, but I am still really happy with it so far.

The screenshots really don't do it justice. The windows are displayed with stereoscopic depth and you can see reflections from the video off of the "floor" surface when you have passthrough turned off.

Yes, I used Claude, and if that bothers you no worries, just ignore me. I am an experienced programmer and guided it carefully along the way. Ended up with a little launcher you point at a Linux x86 MultiView binary. It wires everything up and runs the app. Works great! Once I get things cleaned up a bit I'll post it on GitHub.


r/SteamFrame • • 32m ago

Discussion What's your "Wow :0" game in standalone mode?

Thumbnail
gallery
11 Upvotes

Personally, out of the few games I've tried, I didn't expect Beat Saber to run at 120 fps, except maybe for the audio lacking bass, but it's still top-notch.

Then there’s Forefront at a steady 90 fps, it’s a blast. It’s crazy that it can handle all those players.

And finally, Ancient Dungeon, a real gem. For anyone who loves voxel games, it’s a must-have. It’s so great to play a round as soon as you get home from work! Now tell me about yours. :)


r/SteamFrame • • 16h ago

Question No stock when sent a purchase email?

Post image
121 Upvotes

Hey guys,

I might be stupid but I don't understand this at all. I received a purchase email and within 30 minutes tried to pay for my Steam Frame. I was unable to get past the complete your purchase screen and in my confusion contacted support, who told me that they had no stock available? I understand I won't have to wait an obscenely long time until I get another opportunity, but to be sent a purchase email and have my spirits lifted, only to find out I never even had a Steam Frame available, feels pretty deflating. I would have preferred to be kept on the reservation list rather than be sent a purchase email that couldn't be completed. Anyone else have a similar experience or am I the odd one out?

UPDATE: To make matters even more confusing I was able to purchase the steam frame in my cart only AFTER my reservation expired. Payment went through and got a confirmation email. Assessories however only show as available with purchase now (not that big of an issue as they were all out of stock anyways). What a bizarre couple of days.


r/SteamFrame • • 8h ago

Media RE4 Quest running Natively on Frame in backyard with Translucent Passthrough

27 Upvotes

Recording Test I took using FrameCorder around when I first got my headset, immediately sought after a way to get all those Quest Exclusives over here. Also showing off Translucent passthrough outdoor during the day.


r/SteamFrame • • 10h ago

Game Promotion Kid Icarus: Uprising into a light-gun game on the Steam Frame, in my 3DS emulator Azahar for Frame

33 Upvotes

Hey everyone!

For the last month or so I've been working on something I've wanted for years: Kid Icarus: Uprising in VR, played like a big rail shooter.

I love the 3DS, and I think VR suits it really well. I've been working on Azahar for Frame, a fork of Azahar with CitraVR's VR modes. It runs standalone on the Frame.

Angel's Aim (alpha)

  • Pit's equipped weapon is in your hand as a 3D model, and swaps when you change it

  • Shots, muzzle flashes and a laser sight come out of the weapon's muzzle

  • An HD texture pack for the weapons and their effects, upscaled 4x

Azahar reads the game's memory to see which weapon Pit has equipped.

Aiming goes through u/DarkshadeDX's C-Stick & Gyro patch, and none of this would exist without it. I tuned each weapon's angle by hand, so shots leave the barrel instead of the middle of your hand. It's the first step toward a full 6DOF Kid Icarus VR mod.

Azahar for Frame itself (1.2.0, for every game)

  • Stereoscopic 3D at 120 Hz

  • Switch between VR and Flat mid-game

  • Immersive Mode with Natural 3D, matched to your IPD

  • A redesigned VR menu with save states and autosave

  • In-app cheat, mod and texture pack downloader

  • Homebrew and mod packs, like CTGP-7 for Mario Kart 7

The clip is from early testing where the weapon models, my first go at weapon animations, and the shot effects are usable.


r/SteamFrame • • 3h ago

News Komodo Station has stock for HK/Japan/Korea customers

Post image
7 Upvotes

r/SteamFrame • • 29m ago

Game Promotion I spent the past few months improving the bartending mechanics in my VR game! Would you be interested in playing?

3 Upvotes

You can wishlist PROJECT MIX on Steam today!

https://store.steampowered.com/app/2439770/PROJECT_MIX/

It's on track to release in 2027!


r/SteamFrame • • 18h ago

Discussion Steam Frame is Great but..

90 Upvotes

I love it so far. It’s interesting the fame borders on having a cheap pair of night vision goggles.

The frame has kind of made me hate my phone. Phones use an IR blaster for the front camera to see your face. Just watching my phone sitting on the desk in passthrough mode how many times it’s actually flashing at you. Even when you’re using apps while the phone is awake is crazy.

Also I can see all my neighbors that have security cameras with it.


r/SteamFrame • • 39m ago

Question Confused with the beta resolution multiplier

3 Upvotes

Hey everyone,

I am a bit confused with the new way the resolution works. Before the beta, I used to find a resolution per eye in the VR settings -> video, and I think these were global settings. Next, within each application there was also a resolution multiplier (which I never understood). The original resolution was something like 1728 x 1728 I think.

Now, when I enter VR settings -> Video, in Global there is no longer a resolution multiplier.
When I load a game and enter the Video settings, it now shows a resolution of 3024x3024 and it says that is 100%. However, I notice my GPU is struggling quite a bit. My GPU is a 9070XT.
The slider can go alllllll the way up but I can't imagine anyone being able to have very high fps on that. Is that 100% the new normal? What should I set it at?


r/SteamFrame • • 11h ago

Discussion Crushed Blacks/Poor Dynamic Range

Thumbnail
gallery
16 Upvotes

I think I read that a recent firmware update changed things to be "less washed out". Could that be responsible for the poor dynamic range and crushed blacks we see with steam frame? Did they artificially nerf our displays to "make things pop more"?

I noticed that I could no longer see enemies in the shadows when playing with frame which prompted this experiment. These are through-the-lens photos taken with identical locked exposure on a GoPro hero10 (1/24 shutter speed, 200 iso, 5000 white balance). I even errored on the side over exposing a bit to give the frame a fighting chance (you can see by the sunset making it all the way to full white). It looks much worse in headset through my eyes too. hopefully they can give us options if indeed the panels are capable of more dynamic range.


r/SteamFrame • • 3h ago

Question Steam Frame Setup Tips

3 Upvotes

Hello!

I get my Steam frame today and I am looking for some set up tips and general recommendations.

I know some users have struggled with multi link and I will most likely need to see what works with my setup/do some tinkering if I encounter streaming issues.

I do not plan on using standalone besides watching YouTube or movies on the couch or in bed occasionally.

I’d like to know small quirks as well; I recall reading something about someone starting steam VR on their PC before launching their game on the frame which had an impact on performance (I can’t remember if it was positive or negative)

I currently know:
-turn on Steam Frame Beta
-acquire a 45 watt external battery
-buy a better microfiber cloth for lenses
-turn up rendering scale (I have a 5080 and 9800 X3D so I want to crank it as much as possible)

Any tips are appreciated and good luck to everyone still waiting on one!


r/SteamFrame • • 18h ago

Software Get onto the beta! Streaming is smoother, sharper and more colorful!

45 Upvotes

I must admit, in the first weeks I was a bit disappointed with the quality I was getting from my Frame. Colors were so muted and I kept having blurry or choppy moments. But after updating the beta today, I had a whole H3VR take and hold session without any issues! Sharp image, more vibrant colors and no streaming lag spikes, just the ones I know from the game when stuff spawn in, but that is on any headset.

Long live software updating making good devices great!


r/SteamFrame • • 5h ago

Discussion VR minecraft?

4 Upvotes

I know its brought up a lot, but i've been curious.
I got prism on, and tried getting visor to work, but it currently has some sort of awful bug where the UI bugs out, and starts tearing the screen, desyncing what each eye sees (I think)
Its headache inducing, I was wondering if anyone else was able to get it running smoothly and what you did to make it work?

Things i've done so far were try 26.X version of MC with Visor, Sodium, Lithium, and Visor essentials.
Then I did the same thing just on a 1.21 version, both did it, so it seems like a frame issue mostly.


r/SteamFrame • • 12h ago

Question Steam Controller (2026) won’t control 2D flat games while streaming from PC, but does control Frame UI

11 Upvotes

I can’t seem to get my Steam Controller to actually control streamed games after they launch. The controller works great navigating the Frame UI but once I launch a flat game it’s seemingly not recognized as input anymore (can still access the Frame UI).

The controller is paired to the Frame via BT and the puck is plugged into my PC. It doesn’t matter if I try using either connection method, it does the same thing in both cases. I’ve tried launching from the game mode as well as going to my desktop view and launching the game from there, again it behaves the same in both cases. I don’t have any games installed locally on the Frame so I haven’t tried to see if that works (I bought this mainly for PCVR).

Anyone else that has the new Steam Controller experiencing this same behavior?


r/SteamFrame • • 17h ago

Question Streaming to TV and Frame

Post image
26 Upvotes

I have an odd one. So my family is coming for holiday and my two brothers want to try VR. My room is too small and there is no way to observe what the player is seeing. So my plan is to host on the PC and stream over WiFi. It doesn't have to be amazing quality. My router is 6E Wifi and 2.5G Lan. Any idea how I could stream PC screen as well. The TV in not that smart but I have a Steam Deck and another old laptop i can connect over Hdmi. My first thought was just to run AnyDesk or TeamViewer on deck and host PC. Then streamer over Wifi to Frame. Any of have a better solution?


r/SteamFrame • • 6h ago

Discussion Can someone please demystify how the resolution works? How do you decrease it to get better performance?

3 Upvotes

(This is all PCVR + dongle)

I've been playing SteamVR for over five years now yet I'm still not certain how to get the best performance out of VR games. I thought it was fairly clear, but then the Steam Frame came out and now I'm quite confused.

My gut tells me the real answer is in the per-app settings in each game. Some games have a resolution scaling and that's where you can lower what it renders at to improve performance. Many games don't have this setting, in which case you're out of luck and it renders at what it renders.

But what confuses me is in the SteamVR Headset settings there's a "Per Eye Resolution" setting. I played around with it and I can't tell what it's doing, if anything. I see in my fpsVR HUD that when I change that it seems to change the scaling (in fpsVR), but I can't see a difference visually.

To be more specific: I have an Intel i9-9900K at 4.2GHz and an RTX 3080. I just finished playing Red Matter 2 and while it ran okay, it didn't run great. It was often stuttery and even though fpsVR showed me it would render at 70 - 90 fps, at times it felt like it was 45 (or even lower, when I'd drag the hand-held screen in front of my face it would jitter and felt like it was 20 fps or something). FPS aside, it looked great. The game had a built-in graphics setting scaling factor, and that's what I'd move around to, I think, get better performance.

I tried playing Escape Simulator 2 in VR and it's unplayable. Comes in at about 30 fps and when I try and change the in-game scaling it turns to crap in either direction. I assume that's the game's fault.

Just booted up I Expect You To Die 3 and it ran like butter. Ran at 120 fps and looked great. But the game has no in-game resolution or scaling settings. I assume this is just the devs doing good work.

I think right now my PCVR set-up is working well and the dongle latency is regularly in the 5ms range. I think my issue is with the games I'm playing, their optimization (or lack thereof), and my GPU. I'm hoping there's a setting I can change on the Frame to lower the resolution if the game doesn't allow it, but I can't tell if/what that is.

Any advice would be appreciated. Thanks!


r/SteamFrame • • 17h ago

Discussion Virtual Movie Theater

21 Upvotes

Hi,

Have you had any luck with virtual movie theaters? That is one of the main things I wanted to do with the headset, but Bigscreen Beta doesn’t seem to work. Bigscreen Beta is the only theater app I know of.

Any recommendations or input?

Thanks,

Edit: when I tried Bigscreen, it was in Standalone mode.

Edit again: to be clear, what I am looking for is like a virtual movie theater. So that it feels like I am sitting in an AMC or Regal or something. Thanks!


r/SteamFrame • • 1h ago

Question Streaming VR from OXP3 TO STEAM FRAME

Thumbnail reddit.com
1 Upvotes

r/SteamFrame • • 1d ago Bravo

Discussion I poked around the Frame trying to increase battery runtime while streaming

94 Upvotes

I went into this naively thinking surely you can just undervolt stuff a bit yada yada and ended up in a rabbithole which split into many more rabbitholes.

Reminder: These findings / tests are exclusively about streaming from a PC - Most of this would not apply to standalone

Undervolting

There is no easy way to undervolt the CPU or GPU, and it probably wouldnt pay off anyways. Qualcomms Firmware which controls the V/F curve is signed and supposedly pre-tuned per cpu - The latter means even if we managed to bypass that, there would only be very little headroom to gain (Perhaps maybe 2% of increased runtime, not really worth it)

Multilink / Wifi

This is an interesting discovery - I had assumed that Multilink either splits up the packets onto all links, or it transmits it on all links and just uses whatever arrives first. What happens is the latter, but the additional overhead it causes seems costly - Forcing off multi-link in SteamVR and thus having it use only the Dongle dropped overall powerdraw by 0.5W (~6%). I think the way to go to maxizmize this effect even further is buying the stupid Kevin the Minion router and using only that for streaming rather than the dongle since that way you can drop the 2nd wifi connection and decrease powerdraw in that regard even further. Dropping the 2nd connection thats idle gains nothing.

Sidenote: I've seen people mention previously that you can put the Dongle on USB 2 since its just 100-200mbit and USB2 can handle that. Yes it can, I've tried - It works fine. The cost is latency and that is reflected in the Ping you can see in the Dashboard when you compare USB 2 to 3.

Underclocking GPU

In the Steam VR UI we are given the option to affix the GPU Clock, naively I assumed that setting this to 500MHz locks it to the lowest clock it can go, this is incorrect. Fixing it to 500MHz is actually bad, while streaming from a PC it will go down a fair bit more (310MHz) which subsequently significantly lowers its Voltage. Granted, this only sums up to ~ 0.2W less powerdraw which is almost nothing but its free. It could go down slightly lower still but the gain from that is essentially zero.

Underclocking CPU

This is interesting and perhaps something that Valve could tweak to eek out some more runtime! Valve uses lavd (Latency-criticality Aware Virtual Deadline) on the Frame, in its current configuration this results in the CPU clocking very high even with nothing going on - It makes sense in theory, less downclocking = less possibility of latency spikes due to load spikes - In practice this causes a couple of issues:

  • All the Wifi interrupts land on CPU Core 0, Core 0 Shares its clock with Core 1 - Due to Wifi constantly hammering Core 0, Core 0/1 are permanently at their maximum Clock of 2.3GHz. This in itself isnt a massive issue since these only use about 0.5W in practice but it the interrupts could be spread onto Core 0 / 1 to lower the load and thus clock those down a bit that would be "free". I've tried this, unfortunately I couldnt make it work / the settings that I applied didnt appear to do what they should. Edit: It appears like this is a suspend/resume bug. On a cold boot, the Wifi Interrupts are spread over all cores - After suspend/resume its all on Core 0.

  • All other cores dont really do a whole lot while streaming

  • In general, the CPU appears to clock much higher than it needs to. I have tried to manually cap the CPU frequency of the core groups (2.3GHz -> 1.4GHz, 2.9GHz -> 1.2GHz, 2.4GHz -> 1.4GHz, 1.5GHz -> 1.4GHz) which essentially halved the powerdraw of the CPU while streaming from ~1.85W to just shy of 1W. I have personally not noticed degraded performance from doing this leaving me to believe that Valve can definitely play around with the Scheduler a bit to improve this.

Cameras / Processing

Another place where Valve already put in a lot of effort, unsurprisingly. Not really anything to gain here.

  • Eyetracking is essentially free, it appears to run in hardware

  • It appears like Valve has experimented around with having the Camera tracking run at a dynamic framerate. Checking the XRService binary, it contains strings like "useDynamicFPSWhenNotLost": false, "targetFPSWhenNearlyStill": 18, "targetFPSWhenPerfectlyStill": 2 and a log message that reads Disabling upper cameras due to running at %d FPS.. If it is enabled or not, I dont know - Probably not given the embedded string. Why? I dont know. Possible gain from this? Probably not a whole lot, you're rarely still while actually playing. Perhaps if it was used more aggressively to run the tracking cameras at 30fps most of the time except for heavy movement (Realisticly - I think 30 FPS Camera tracking should be fine given that the ground truth / primary tracking source is always the IMU but no idea)

TL;DR

There isnt a whole lot to gain here unfortunately.

  • Out-Of-The-Box things that actually help: Dont use Multi-Link if single-link runs fine for you, dont affix the GPU Clock (Leave it Auto), lower display brightness (duh)

  • Advanced method: Applying a CPU underclock As mentioned in the CPU underclocking section, the CPU clocks close to its max while streaming, even under low load (streaming). In my test i was able to underclock the CPU significantly which lowered the overall system powerdraw by 0.9W, lowered the Fan RPM from 8600 to 7400 and the CPU Temp from 55 to 51°C at the same time. If you want to give this underclock a try yourself and see if you experience any degraded performance from it you can run this in the terminal. This is non-permanent and a full reboot clears it. Core 7 is left default since its effectively unused, underclocking it made no dent.

    • Aggressive underclock (What I tested): for p in "0 902400" "2 1190400" "5 844800"; do set -- $p; echo $2 | sudo tee /sys/devices/system/cpu/cpufreq/policy$1/scaling_max_freq; done

    • Slighly more conservative underclock (Shouldnt increase power by much): for p in "0 902400" "2 1497600" "5 844800"; do set -- $p; echo $2 | sudo tee /sys/devices/system/cpu/cpufreq/policy$1/scaling_max_freq; done

    • (My) stock frequency limit, I'm no 100% certain if its the same for everyone but I'd guess so (In doubt you can just reboot to restore): for p in "0 2265600" "2 3148800" "5 2956800"; do set -- $p; echo $2 | sudo tee /sys/devices/system/cpu/cpufreq/policy$1/scaling_max_freq; done

    • One more thing (Wifi Interrupts) As mentioned above, after suspending and resuming the frame, all Wifi interrupts appear to wander to CPU core 0, for this test I've affixed them to core 2/3 and you should probably do too since I dont think core 0 can handle the wifi traffic with that underclock: c=2; for i in $(awk -F: '/DP_EXT_IRQ/{gsub(/ /,"",$1); print $1}' /proc/interrupts); do echo $c | sudo tee /proc/irq/$i/smp_affinity_list >/dev/null; c=$((5-c)); done


r/SteamFrame • • 11h ago

Media Some Backyard Translucent Pass through gameplay at night

6 Upvotes

Using the Color Camera at night its very dark except for my backyard lights and distant streetlights. I find it to be pretty immersive to the infinite walking playstyle as well as being more mobile since I don't play with boundaries. I have a bind where I long hold either stick to switch between color and monochrome which would be even clearer where I am relative to world.


r/SteamFrame • • 8h ago

Discussion Which FH6 mod is best for Steam Frame?

3 Upvotes

I have this game working on GrayHorizon, I've also seen some people use nalululuna and cheeky render mod. What version works best and have you been successful with FG? I'd like to get FG working on this.


r/SteamFrame • • 10h ago

Question Best way to carry battery pack?

4 Upvotes

I recently got and have been experimenting with a battery pack to extend my Frame's life.

* First I tried was mounting it to the back of the headset, but that put way too much pressure on my forehead. Now I understand why Valve made the strap as light as they did, and I don't want to change that.

* Then I tried putting it in my pocket. This worked alright, but usually I just wear lightweight clothes without pockets, and the cable running all the way down to my waist was distracting anyway.

* Currently, I'm just tossing it in a drawstring backpack that I wear on my back, and this solution is the best so far, but it is a bit loose.

I know that I want it somewhere on my torso and not too loose. I have thought about getting a sling bag or cargo vest, but I'm not sure they'd be worth it. Has anyone tried anything like this?


r/SteamFrame • • 1d ago

Accessories Custom Tracker using Frame IR tracking

Thumbnail
gallery
117 Upvotes

A little over a year ago, I started working on some custom hardware in preparation for the Steam Frame; some of you might have seen my early posts on this Reddit going over my progress on my hardware projects under the name Frame Workshop. A few days ago, I finally got my IR trackers to be tracked by the Steam Frame itself. The idea behind the Locus trackers is that they would be IMU trackers supported by IR tracking to eliminate drift. While Locus's main goal isn't to be fully tracked by IR, this shows that custom controllers or other hardware can be tracked by IR. I am beyond thrilled that the Steam Frame is turning out to be the first truly open headset, something that I have waited for so long.

The trackers themselves are pretty simple; at their heart is an NRF52833 with an LSM6DSV16X IMU both the same MCU and IMU that the Roy controllers use. On top of that, they have 3 IR LEDs in each corner to help correct IMU drift when the cameras see them. A 250mah battery powers all of this, and the device is about 43 x 43 mm and 27g. All hardware is currently open source on the GitHub linked below, with firmware and software to follow.

If anyone has any questions, feel free to leave a comment.

Frame Workshop can be found here: https://github.com/Nieko27/Frame-Workshop


r/SteamFrame • • 13h ago

Hardware Steam support won’t let me RMA

5 Upvotes

A few days ago I received my steam frame and after initial setup I tried to play some Blade and Sorcery. That’s when I realized my right controllers grip does not work, I figured it was the game so I switched to H3VR. Same thing. So I went to controller settings and noticed the “pull” bar for measuring how much you “grip” the controller is not activating on the right controller, even fully pressing the grip to click feels like it requires more force on the right.

I contact support and messages I have received are: I am holding the controller wrong, keeping using and the finger tracking should work, there’s an update coming out to help with finger and grip tracking just wait for that.

My controller arrived broken and they really won’t let me swap it out. Instead they are insisting a software issue. Am I losing my mind? I also have a video of testing both grips to show the pull bar fill on the left but not right.