r/Squonk_Life • u/R-e_D_u-X • 15d ago
My favorite daily driver, what's yours? NSFW
This has been my favorite driver for years and I own 3 versions of this. So far I haven't been able to find an upgrade from this. I'm open to suggestions!
r/Squonk_Life • u/i_ducasse • May 17 '24
A while ago r/RBA was banned for reasons unrelated for this post. It was a home for users of all kinds of rebuildables, from RDAs to boros to stock coil setups with RBA options. It also has a huge archive of useful information we felt it would be a shame to see lost.
So anyway, we're bringing it back as an r/Vaping and r/Squonk_Life sister sub. So if you have rebuildable questions or want to show off your build, you now have a place specifically to do so.
So if you're tired of pods and disposables everywhere else, come over and say hi!
r/Squonk_Life • u/R-e_D_u-X • 15d ago
This has been my favorite driver for years and I own 3 versions of this. So far I haven't been able to find an upgrade from this. I'm open to suggestions!
r/Squonk_Life • u/toolsavvy • 15d ago

Wotofo Nudge mod semi-mech. Bought at a local shop last week that seems to have phased out 510 gear more or less. I call it a semi mech because it uses a standard inline mini blade fuse, otherwise it would be full mech it seems. Only issue so far is the door magnet came out and stuck to the magnet in the mod so I had to glue it back on the door, but otherwise I can't complain for what it is. I might go back and buy another if I feel it's worthy enough. The door fits well, flush with no rattle or moving. Plastic is kind of thin but solid enough. I guess they wanted to make it as small as possible, right down to the millimeter LOL. The button lock kind of sucks but I can live with it.
Guy behind the counter actually asked me "what exactly is that"? Vape shops have changed a lot.
r/Squonk_Life • u/ThrowingMongo • 16d ago
It's hard to find squonkers anymore and I had to sell all of mine a couple years ago to make ends meet. I only kept the Ijoy Capo Squonker because no one would ever buy it since all the Youtube and forum reviewers shat all over this mod claiming it has a junk motherboard and chocked it up to Ijoy putting out trash. So I just kept it in a drawer with a few BF RDAs and just vaped a mod/RTA setup instead.
Well I'm glad I kept it and I'm here to tell you it's not a trash motherboard, under powered or anything of the sort. Here's the "problem" with the motherboard and it's not a problem at all.
It doesn't have a stepup controller, only a stepdown controller. As such it can only give you at or below whatever the battery's voltage is at a point in time. So if your battery is at 3.8v, then you cannot supply over3.8v, the mod will only give you 3.8v at that time. But it does have stepdown which means it will give you whatever voltage you need below the battery's current voltage. So if the battery is a 3.8v and you only need 3.5v for your build, you'll get 3.5v until the battery goes below 3.5v. But if you need, say, 3v, the mod will always be able to give you 3v right up until the mod's voltage cutoff of ~3.3-3.4v.
So to get a consistent vape at whatever wattage you like, you have to build keeping this in mind. And it's very simple, it's all about ohms law.
Example 1: To get a true 80W vape consistently from full battery (4.2v) to spent battery (~3.3v), you needed a ~0.15 ohm coil.
Example 2: If you have a ~0.5 coil, you can vape at 23W or lower if you want to get a consistently from full battery to spent battery. Set the wattage any higher than 23W and you will notice it's not really giving you the wattage you set it at. So if you usually build at ~0.5 ohms and vape at 40W, well you can still vape at 40W, but you have to build for it, so see example 3.
Example 3: if you want to vape at 40W consistently, you need a ~0.3 ohm coil. Set the wattage any higher than 40W and you will notice it's not really giving you the wattage you set it at.
Example 4: if you want to vape at 58W consistently, you need a ~0.2 ohm coil. Set the wattage any higher than 58W and you will notice it's not really giving you the wattage you set it at.
Now lets say you always build at ~0.12 ohms or lower (the mod allows down to 0.05 ohms I believe). Well, you'll never know that this mod has no stepup because in this case it never has to stepup the voltage. The mod only ever has to stepdown the voltage, which it can do since it has a stepdown controller.
I'm telling you all this because as you know the squonker market has dried up save for any used ones you can find and higher end stuff. But this mod can be found on clearance still and it's worth looking into if you can use an ohms law calculator and are willing to deviate from what your usual build is to get whatever wattage you usually prefer.
For a mod without stepup, it's all about choosing your wattage first then building for that wattage. That's how a non-stepup mod is used.
Is it a super awesome mod? Not for anyone who likes a lot of features. It has no stealth mode, no lock mode, no TC, no preheat, etc. Basically it's just on, off, wattage up and wattage down and that's it. It's super simple, but super nice in the hand and it takes 18650/20700 and 21700. So if you like it simple and don't mind building for your desired wattage, it's a great find and there are probably a lot of them out there on clearance because everyone misunderstood this mod and shit all over it lol. I came across two a month ago for $18 each, mod only, and I snatched those up right away. Now I have 3 squonkers. When I get more money I'm going to start looking for other clearance squonkers, though they can be tough to find at any price.
CORRECTION: I found a couple on clearance, it doesn't mean you will. But I've seen them out there for non-clearance prices so they are out there for the buying.
Oh and mine came with Ijoy 20700 batteries. Not the greatest battery but not bad either. I thought they'd be no good but they were holding their 3.6 storage voltage so that was pretty awesome and are working well. My biggest gripe was that I couldn't get the full black but hey, a deal's a deal.
r/Squonk_Life • u/n1nj4squirrel • Sep 30 '26
I'm looking to get a new squonk mod and atomizer, but I can't find anything in stock anywhere. Is there some secret place to be ordering these from? Do people still make them? I've had both a topside dual and a couple of pulses
r/Squonk_Life • u/astrozuni • Sep 29 '26
This is just me ranting.
It really breaks my heart; "OUT OF STOCK", "NO LONGER AVAILALBE", "404 SITE NOT FOUND" these phrases and more are almost a rebuildable/squonk vapers mantra at this point.
This wasn't something that happened overnight and it happened without warning; what's our recourse? Do I switch to disposables and shelve my hoarders collection of mods and kits which are one-by-one failing without hope of ever replacing?
Pictured is a mod I picked up back in 2022 on a sketchy site that was selling them for way cheaper than I thought to be possible (seriously, I thought the site was a total scam but what the hell, roll the dice, right?) when my current mod finally breaks down, which unfortunately seems like it will be sooner rather than later, this is my last hold-out. My hill to die on, the final nail in the proverbial coffin of a by-gone era.
Maybe it'll have a resurgence, all things come in waves right? Trends rise, fall, die out and after a decade or two, the kids think "Oh this is so cool! This is retro, vintage, etc." So maybe an injection of crazy youths will abandon the disposable giants and bring back the need and demand for rebuildables once more!
Maybe. Rant over.
r/Squonk_Life • u/PatchNotes89 • Sep 27 '26
not my pic, but anyone know of where to pick these up at? I'd LOVE to throw a squonk onto my dotapollo or even another. it fkn sucxxx that squonks are SO damn dried up and not avaliable! pissed dot x aio didn;t come out with the squonker, not patient enough for the stubby2 aio.. like WTF?! is up with the BORO obsessions? i have them, but too much rigamarole to get down do when i just wanna change cotton quickly an go
r/Squonk_Life • u/Room511 • Sep 26 '26
All of a sudden the screen on my Snowcap Avalanche V2R is getting dimmer and dimmer.
I tried adjusting the brightness in the settings but going brighter doesn't work. But going dimmer does.
I'm afraid the display will eventually become unreadable. I already notice a difference over the past few days.
I reached out to the Dev but I haven't received an answer yet.
Anyone here have this issue?
r/Squonk_Life • u/buzzfriendly • Sep 17 '26
r/Squonk_Life • u/DoubleSushii • Aug 31 '26
I've been using this mod for a while now and the Pulse series stuff for many years since the first one. Both of my bottles for my V3 have hairlines in them so they are leaking on the sides now.
Where could I look for some replacements? Everything appears to be sold out - and Vandy Vape as far as I can tell is out of the Pulse and mod game in general (also since their site is down at the moment it seems).
The mod still works fine, just need bottles, but of course at some point I may want/need a new mod and Squonks don't seem to be made much at all anymore so any additional recommendations similar to the Pulse would be welcome as well. I also use Mesh in my Wotofo profile and those are dying as well so everything is disappearing that I like .-.
r/Squonk_Life • u/tommyftw95 • Aug 28 '26
Hello everyone, new to squonking here and I got myself the Pulse V3. Wish I got a squonk mod years ago as it's just so good!
The only problem I have is these silicone bottles it came with, they alter the taste drastically for me and I want to get plastic ones instead. I'm not sure I can find any that would fit this mod though - can you guys please suggest any?
r/Squonk_Life • u/Murky-Background9987 • Aug 13 '26
28x2+40 3mm Id 6wrap ,tm 24 pro deck with trinity glass cap,cooler Temps tons of vapor
r/Squonk_Life • u/buzzfriendly • Aug 05 '26
r/Squonk_Life • u/buzzfriendly • Aug 03 '26
r/Squonk_Life • u/goose41327 • Jul 26 '26
Brought out the Pulse II with the Aequitas RDA
r/Squonk_Life • u/Murky-Background9987 • Jul 16 '26
Wasp nano clone 4x28+38 , 3mm
r/Squonk_Life • u/Illustrious-Gas5171 • Jul 15 '26
r/Squonk_Life • u/Miserable-College-55 • Jun 29 '26
Todays vape mail did not dissapoint, and the nar8 rda was hands down the flavourbeast i have been looking for.
r/Squonk_Life • u/Big_Ad_835 • Jun 30 '26
My pulse v3 and topside single batt mods have both failed me this year and can’t find anywhere to buy something new I need it to be a regulated mod the only one I have found is topside dual on element vape but I have a bunch of 21700 batts and don’t want have to buy new batts and waster these ones I have.
Any suggestions are super appreciated I loved the pulse and topside u til they failed me so something similar would be great I am using a thunderhead creations solo rda at about .2 ohms!
Tia I am desperate.
Edit * preferably in us so shipping and tariffs don’t destroy me.
r/Squonk_Life • u/EdwouldZilla • Jun 26 '26
Im struggling to find a Squonk and wondering if you guys could help. So I had the Vandy vape pulse v2 BF, 225K puffs until i lost it. Love the machine and sadly couldn't reach to the 999,999 puff counter.
This was an year ago and i bought the vandy vape V3 model, which sucks. The bottle just leaks into the battery compartment and the plastic isn't a nice feel and its dead (seawater, my fault).
So I have Dovpo topside single, but it being a pain to find (base in UK) other option is the topside double. The flipside doesn't appeal to me since it has similar problems with the vandy vape 3 about the bottle leaking and puff counter reset when battery out.
Is there an alterative one that would be good? Or if anyone selling a vandy vape v2 BF?
r/Squonk_Life • u/RapDance • Jun 24 '26
I broke both bottles on my Pulse V3, and yesterday I looked for shops in Italy that sold squonk boxes, but I couldn't find any. Can anyone recommend any Italian shops or shops that ship throughout Europe with squonk boxes available?
r/Squonk_Life • u/Parceljockey • Jun 23 '26
Doing a bit of cleaning, and I came across this on the shelf. I used the hell out of it for a couple of years.
Catfish Atty Mods, DNA 75. 3D printed and hand assembled.
Still feels great in hand. Back before 3d printing was a common thing. I even went to the local 3d guru (who also owned my favorite vapor stores) and had him print low profile buttons for it. Modded the screen with a little bit of phone tint, for discreet use.