r/SpringfieldArmory • • 21m ago

Took my first Springfield to the range today.

Post image
5 Upvotes

Bought this Mod4 about a month ago, and finally got to put some rounds through her. I am by no means a marksman, but I love shooting. Used the “head” of the target to get the sight dialed in. The center grouping is roughly 50 rounds shot between my FIL and I at 10 yards. Safe to say I love this gun.


r/SpringfieldArmory • • 2h ago

Rattle Can Saint Victor SBR

Thumbnail
gallery
9 Upvotes

Thoughts?


r/SpringfieldArmory • • 2h ago

Straight Butter

Post image
44 Upvotes

r/SpringfieldArmory • • 5h ago

New Sights

Post image
1 Upvotes

After 12 years, tritium 3dots died. Kensight low profile tritium target sights for Loaded Parkerized. 45acp A1.


r/SpringfieldArmory • • 8h ago

First 1911 SA Operator

Post image
17 Upvotes

r/SpringfieldArmory • • 17h ago

Help with some smithing work on a Hellion

Thumbnail reddit.com
1 Upvotes

r/SpringfieldArmory • • 19h ago

Springfield Prodigy DS 1911 with a 5-inch barrel a Resin Oxide Arrakis variant

Post image
7 Upvotes

r/SpringfieldArmory • • 1d ago

Echelon pro & kuna goes well together

Post image
60 Upvotes

r/SpringfieldArmory • • 1d ago

Another one!

Post image
153 Upvotes

Couldn’t help myself !

Defender ST-G, Tlr-7HLX , Mcarbo trigger.


r/SpringfieldArmory • • 1d ago

Pocket dump

Post image
7 Upvotes

Little edc pocket dump. Yes I cut the side ports in myself on my mod3. Next is ported barrel.


r/SpringfieldArmory • • 1d ago

Echelon Pro 4.0c flush magazine attachment with the magwell

1 Upvotes

Im seriously considering the Echelon Pro 4.0c as my edc (i currently run the regular 4.0c with the NDZ Performance magwell) and i can only run it with a magwell and flush magazine, does anyone know for certain if one of the aftermarket (rooks precision / floyds custom etc) baseplate for the flush magazine is compatible with the the stock PRO magwell

tl;dr - do you know if the stock magwell of the Echelon Pro 4.0c accepts flush magazines with any popular aftermarket baseplates?


r/SpringfieldArmory • • 1d ago

Has anyone used the adapter plates on a hellcat to put a red dot on. My hellcat was one of the originals and does not have the cut slide. I’m looking at running the halosun, Sig Romeo or the olight se. If you have any experience with any of these and what else needs to be purchased with the kit

Post image
1 Upvotes

r/SpringfieldArmory • • 1d ago

Will Echelon 4.5 fit on compact frame?

2 Upvotes

Really love my 4.5F but want to carry concealed, so I’m curious if I can just get a compact frame and swap everything to that. Ideally I’d buy a 4.0c but I don’t have the money for that.

Anyone have experience with this?


r/SpringfieldArmory • • 2d ago

Picked up the last XD Mod 3 in my area for $275

Thumbnail
gallery
137 Upvotes

First gun purchase. I have wanted a hand gun for a couple years now and finally decided it was time. At first i was seriously considering the Heritage Rough Ryder Revolver (for the novelty) but ultimately decided to do some more serious research and ended up with this as its “budget friendly” “optic ready” and has a 16 round mag.


r/SpringfieldArmory • • 2d ago

Fierce yet Elegant

Post image
60 Upvotes

All in a compact package


r/SpringfieldArmory • • 2d ago

Hellcat striker play

1 Upvotes

Hey guys I have a first gen Hellcat, while doing some CC draw drills in my kitchen yesterday (unloaded of course). I noticed a rattle noise, shaking it next to my ear sounded like it was coming from the rear of the gun. Field stripped it and found that I could move the striker back on forth with no effort. I know this is considered normal when the slide is locked back or off but it sounded identical to the noise I was hearing with then gun in battery. I removed the striker and didn’t see anything obviously wrong with spring. Wondering if anyone else has run into a similar striker spring issue.


r/SpringfieldArmory • • 2d ago

Happy 1911 day!

23 Upvotes

The Operator.


r/SpringfieldArmory • • 2d ago

Finally got my self a Prodigy Comp.

Thumbnail
gallery
167 Upvotes

r/SpringfieldArmory • • 2d ago

Can I stick this strait into my 11.5” Saint Victor?

Thumbnail primaryarms.com
1 Upvotes

Only ever shot it suppressed with a LBP can and it still seems to hit pretty hard…

Should I do this or an adjustable gas block first? Or both?


r/SpringfieldArmory • • 2d ago

My new hellcat pro is shooting like 8 inches low at about 10-15 yards?

1 Upvotes

I have been shooting several pistols for over 10 years now and have never had this issue. I have had plenty of super snappy pistols in the past and am used to them. I had someone load a dummy into a magazine, and when i pulled the trigger the dot stayed on target, so i dont think its recoil anticipation. I will be honest, I do generally have a group that a little low and left, but usually thats like 1-2 inches, with a group size of about 4 inches, so still on target, and I have been working on better finger placement.

But this thing is like 8 inches low, just a hair left of center of the target, with around the same 4 inch group. And the green dot sight that came pre-installed, I had to bottom that adjustment all the way to get it on target, but its not quite high enough yet. What is going on here? Is there something wrong with my gun? Do I need to send it in for warranty work?


r/SpringfieldArmory • • 2d ago

Underworld Arms Compensators for your Echelon, Glock, and more. Looks pretty cool to me.

Thumbnail gallery
26 Upvotes

r/SpringfieldArmory • • 2d ago

Kuna is complete for now!

Post image
148 Upvotes

This is my current set up for my Kuna! Double tax stamped :/ Love this thing.


r/SpringfieldArmory • • 3d ago

A cpl of my favs. Fun fact, my kuna weighs more than my Honey Badger

Thumbnail
gallery
27 Upvotes

r/SpringfieldArmory • • 3d ago

Echelon Dead Trigger Every ~30 Rounds (After Warranty Repair)

3 Upvotes

Looking for insight on a recurring dead trigger with my CA-compliant Springfield Echelon (with the magazine disconnect safety):

Every now and then and for no reason, I get a completely dead trigger while shooting and it keeps happening. For example I shot 2000 rounds through it with no issue and then recently started again

When I drop the mag and rack the slide, a live round ejects! so it’s feeding and going into battery fine.

Reinserting the same mag and rechambering the exact same rounds fires normally until it happens again ~30 rounds later.

Context:
Out of the box, it wouldn't fire a single round. I sent it to Springfield for warranty work (they didn't specify what they fixed), and now it shoots, just with this recurring dead trigger.

The magazines run flawlessly in
my Echelon 4.0C, so it isn't a mag issue.

I suspect the CA magazine disconnect safety in the COG is losing contact or tripping under recoil.
Anyone else run into this on a CA-compliant Echelon or know a permanent fix before I send it back to SA again?


r/SpringfieldArmory • • 3d ago

I love the modularity

Thumbnail
gallery
135 Upvotes