r/Sliderules • • 2d ago

KL-1 Pocket Calculator / “Circular Slide Rule” - who has one?

Thumbnail
gallery
145 Upvotes

I’ve been teaching myself the basics on this KL-1 Russian Pocket Slide Rule over the past couple months. I found it very interesting and satisfying so I designed an interactive app that teaches how to use it.


r/Sliderules • • 2d ago

There are still manufacturers of non-specialised slide rules like Concise and Kohinoor slide rules and fabrik

Thumbnail
gallery
93 Upvotes
  1. Concise 300N

  2. Kohinoor Slide rules selections

  3. Circular Computer CR-3


r/Sliderules • • 2d ago

Beginner guide to slide rule hunting on ebay?

6 Upvotes

As per above, I would like to buy a nice general purpose slide rule, preferably with case + instructions, doesn’t have to be inexpensive, wondered if there’s a wiki or other primer for beginners that points you towards popular, quality slide rules that aren’t priced as limited edition collector items?

Thx in advance for any advice or pointers?


r/Sliderules • • 5d ago

Albert Nestler No. 23 R / 3 - Three (hopefully) basic queries

Thumbnail
gallery
8 Upvotes

Hi,

I own the classic K&E Deci-Lon (68 1100) and a second slide rule that I acquired this year, mainly because of it's significance. It's an oldie: The Albert Nestler No. 23 R / 3 - Based on my research, it looks like this slide rulers was built in the period of 1920-1930. I have 3 specific questions about this 100 years old ruler. I will appreciate your comments and insights:

(1) What is the reason for the three hair lines in the cursor (see attached image)? How are the two at each side of the centered one actually utilized? I can not find details and/or examples.

(2) This ruler has 3 standard measuring rulers (see photos): from 0 - 27 cm (in one side), from 29 - 54.5 cm (at the center, under the slide and from 1-6.5 at 1:25 scale. Are these simply rulers to be used to measure lengths or draw straight lines? Is there other functionality? If yes, the one at the center doesn't make a lot of sense to me.

(3) Do you know a link to get an associated user manual of such old slide rules - I went to multiple sites, museums, etc. and the best I can get are catalogs where this ruler is listed, but no actual manuals.

Thanks in advance for your comments and guidance!


r/Sliderules • • 11d ago

Droids for scale.

Post image
105 Upvotes

r/Sliderules • • 11d ago

Yard sale find

Thumbnail
imgur.com
14 Upvotes

Can’t believe I found this on after I found another one last week. It was a Keufel and Esser Co. log log duplex decitrig. It’s a bit scuffed up and the latch on the lid of the case is torn off. The wheel feels a little stiff. Does anyone have any tips on lubricatimg the wheel with out leaving any marks. This thing is pristine.


r/Sliderules • • 12d ago

I got a slide ruler

Thumbnail gallery
35 Upvotes

r/Sliderules • • 14d ago

Match Set - My Picketts

Post image
33 Upvotes

N4 ES
N600 ES

(new to me)


r/Sliderules • • 15d ago

Mission control costume

Thumbnail gallery
55 Upvotes

r/Sliderules • • 17d ago

New (to me) N600ES

Post image
73 Upvotes

My latest addition, a Pickett N600ES, of NASA fame, side by side with my other Pickett, an H10. Both cursors set to Pi on their respective slides.


r/Sliderules • • 17d ago

Pickett N3 sq root scales ???

Post image
12 Upvotes

Can someone explain me the " EVEN [DIGIT ZEROS) NOS" mark and how it works and which scale it correspond to ? Because its centered between the 2 scales, so is it for the bottom or the top one ?

On the cube scales theres the same system but the indication is centered to each respective scale.

EDIT : I'm so stupid... i forgot the scale is split in two, one is for the left part, the otger for the right, right ?


r/Sliderules • • 20d ago

Bought my first ruler

Thumbnail
gallery
79 Upvotes

Found this for 7€ and altought i might not use this daily it is a fascinating piece of tech, very simple yet genius concept!


r/Sliderules • • 24d ago

Help me revive this demonstrator slide rule! Where can I get a cursor/hairline? Can I 3D print one?

Post image
17 Upvotes

r/Sliderules • • 24d ago

Dietzgen 1750P

Thumbnail
gallery
16 Upvotes

My lovely wife got me this slide rule that was advertised as a Dietzgen 1734. When it arrived, clearly it is NOT a 1734, which is a Log-Log rule. A quick scan of the Dietzgen page on ISRM shows that this is a 1750P, a Rietz rule.

No problem, it's a nice rule, and it wasn't expensive. Some closer examination shows that this rule is missing three of the four screws that hold its upper rail on. The screws are clearly meant to provide for adjustment of slide friction, but when there is only one, it's a wide range of adjustment!

I removed the screw and was pleased to see that the rail has little metal threaded inserts. I had been afraid that the screws were just screwed into the wood, and that the holes were stripped. The threads in the inserts look good!

With its cursor holding it all together, it looks like a nice rule! The non-adjustable rail seems to be split at one end, but a little wood glue and clamping should help that.

There is plenty of information about Dietzgen's Log-Log, Micromatic, and Microglide rules, but no one seems to have documented the "lesser" models. I also recently got a Dietzgen 1744 "Polymath Multiplex" (in much better condition!), but there just isn't much information available about it.

Does anyone know anything about this rule? Any guidance on replacement screws?

Thank you!


r/Sliderules • • 28d ago

K+E 4181-3 Left to rot after being soaked - cursor metal frame is heavily corroded. Replacement options?

Thumbnail
gallery
17 Upvotes

Acquired this K+E 4181-3 slide rule in the last few days. All indications are that it had been submerged and just left to sit and rot rather than extracted and correctly dried. When I attempted to - gently!! - pull it out of the leather case, the entire cursor came apart along with a crapton of rust falling out of the case.

So far:

  • Cursor appears fine.

  • Plastic cursor bumpers appear fine.

  • Screws in the cursor bumpers are clearly rotted.

  • Metal frame to hold everything together is rotted.

I intend to use electrolysis to remove all the rust, but I fully expect the screws to dissolve away along with the metal frame.

Some light cleaning of the slide rule itself indicates that the rust staining is removable from the plastic, so I am going to assume the cursor bumpers and the cursor glass will be the same.

Is there anyone else who has a spare metal frame from the same/similar model that I can make use of? Or would you know where I can source this from?

I am hoping that someone out there has just the slide rule in a disposable/destroyed state, but with the metal frame around the cursor still usable. Willing to pay for shipping and a nominal compensatory fee.


r/Sliderules • • Oct 16 '26

Found my grandfather’s Thacher Calculating Instrument (K&E N 4012) -- looking for advice on where to sell

Thumbnail
gallery
31 Upvotes

r/Sliderules • • Oct 13 '26

Here comes the metric system! Analog metric calculator circa 1975.

Post image
40 Upvotes

r/Sliderules • • Oct 11 '26

Removing rust from cursor spring?

6 Upvotes

Does anyone here have any experience with removing rust from a lightly-rusted cursor flat spring? If so, what's the safest (for the slide rule) way to do that? Alternatively, can anyone recommend a reliable source for such springs, if such exists? Thanks in advance!

EDIT: I figured it out. While I am very grateful for all of the responses, I have to say that staring down the rabbit hole of a deep-dive into metallurgy was just a tad intimidating. Instead, I found Evapo-Rust, which did the trick just fine. It doesn't eat away at anything except rust, so it's safe to use around wood, plastic, etc., or in other words, all of the other materials one might encounter in a slide rule. It got the rust off of the spring just fine, but unfortunately it did nothing for the rust stain on the plastic cursor. However, it did not harm the hairline at all, so there was no harm in trying. The spring is as spring-y as it was before being treated by Evapo-Rust.


r/Sliderules • • Oct 10 '26

Help appreciated

4 Upvotes

I recently inherited quite a few slide rulers, and know nothing about them.

Does anyone have any advice on the best way to identify them and their value.

I want to keep a couple for sentimental value, but I dont need 30 of then.

Any help is appreciated!


r/Sliderules • • Oct 07 '26

French E6b

Post image
97 Upvotes

As per title


r/Sliderules • • Oct 01 '26 Mindblown

Slide calculator that you can print (sheets for printing)

Thumbnail
gallery
37 Upvotes

Here are the images optimized for two formats (A4 and US letter), that you can copy/print from the post and make your slide calculator using home or office printer and scissors . Other materials, such as one-side sticky tape (to cover all exterior/moving parts), №10 staples and A4/US letter thin cardboard sheet are required alongside the printed sheet. After cutting and assembling, the staples should be de-tightened so the slides would move.
Can be theoretically used where calculators are normally prohibited (such as exams), and if paper for calculating by hand is not available, or as a cool postcard as it is possible to write a greeting on its back =)


r/Sliderules • • Sep 30 '26

I designed and made a cardboard slide calculator

Thumbnail gallery
47 Upvotes

r/Sliderules • • Sep 30 '26

What's ur daily driver ?

Post image
21 Upvotes

Here's mine, an old 52/82. I find it very versatile and handy. I like the layout.


r/Sliderules • • Sep 29 '26

Is this useable? Missing a scale?

Post image
17 Upvotes

New watch with a rotary slide bezel. Yet it appears to be missing a scale. Or am I wrong?

What is this useful for?

It was a cheap watch, I wanted the moon phase. I'll be curious to see how accurate it is.


r/Sliderules • • Sep 27 '26

Slide Rules ?

25 Upvotes

I had my first engineering job in the early 60's, of course I had my my trusty K&E Decitrig wit me.

much to my surprise, everyone there used Mechanical calculators, like the Friden, etc. Never touched my Rule again. Im now 86 and getting back into it,.. What fun.