r/SimrellCollection • • 14d ago

Help Classic cap question?? NSFW

I’ve ran into an odd situation with my Ti classic cap. When I breath in it stops like it is clogged but I can blow out the cap seems something is moving around when I try and inhale and it stops me. Has anyone had this happen?

4 Upvotes

6 comments sorted by

3

u/Dylan_Stylz_ 14d ago

Sometimes I’ve noticed when the thermal capacitor gets a little loose that happens just lightly tighten it down with the tool.

3

u/floorDUH904 14d ago

Yep that fixed it thanks

1

u/Dylan_Stylz_ 14d ago

Glad to help! Take care out there

4

u/Dangerous-Noise-4692 14d ago

Yes, it’s happened to me. The thermal capacitor had come basically all the way unthreaded and was blocking airflow when I pulled air, but when I blew through it everything was fine. You can tighten the capacitor in the cap with the Multi Tool or the intercooler that comes with the device. Be gentle when tightening so you don’t warp your tool.

3

u/Successful-Nature630 14d ago

That's the answer for sure.

1

u/IndependenceNo4672 11d ago

I found it takes a few heat cycles of checking before it stays put too