r/ShotshellReloading • • Jun 11 '23

Shot gun shells

1 Upvotes

"I'm new to reloading in general, but every time I try to talk about reloading shotgun, everyone writes it off as too hard and not worth it. It is worth it; they're just stupid. But I keep hearing that you have to know the wad type, which makes sense, and the powder you're using and the size of the shell. One guy told me I have to know the exact brand of shell, not just the brass size. I think that's completely bullshit because the brand shouldn't make a difference. Anyways, I have a Texan reloader all-in-one. It has 4 little round inserts for measuring powder and shot. I have no clue which ones I need to use. I also have no clue about powder; other than if you use the wrong stuff, it'll make your gun nasty af or could blow it up. Other than that, I'm clueless. Someone wanna help me out? Because $14 a box or $110 a flat is absolutely fucking terrible, and I'm done paying these ridiculous prices. I have a 2 3/4 Mossberg shotgun. I load low brass for fun because I teach a lot of new people. I use high brass sports rounds for skeet and five stand, and I would like to load slugs to stockpile and hunt with."


r/ShotshellReloading • • Jul 26 '26

Does your press look like junk?

0 Upvotes

I don’t know about anyone else here, but it drove me nuts buying an older used mec and it being just a hunk of rust amongst two great condition presses. Having that one press that just stood out in the WRONG ways made my bench look junky and cheap. Although it’s just a tool, I’d rather take care of my tools so they operate and look like they’re still brand new!

If you’re the same way and would like to liven up your bench, feel free to reach out! I’ve refurbished about half a dozen 600s now and have a pretty good system going. Or, if you’re thinking about getting rid of a press or two shoot me a message! I’ll also do any brand or model!


r/ShotshellReloading • • Feb 12 '26

Shotshell pressure testing

0 Upvotes

Does anyone happen to know of a place you can send a series of loads for them to pressure test without having to make five at each weight? I’m really just trying to see if N320 is feasible with higher weight loads for a SBS.


r/ShotshellReloading • • Aug 21 '26

Who has two or three empty shot bags I can bum for the cost of postage?

1 Upvotes

I need to make some new benchrest bags and a shot bag full of sawdust is ideal.


r/ShotshellReloading • • 2d ago

Recommended load data for 12ga not covered in manual

Thumbnail gallery
4 Upvotes

r/ShotshellReloading • • Mar 18 '26

Just found out that a 18650 battery fits perfectly in a shotgun shell

Post image
5 Upvotes

r/ShotshellReloading • • Sep 04 '24

Ignore me if too much

2 Upvotes

It’s a big ask but can anyone give me a complete list of all I need to get started from nothing. I want to reload buck shot and slugs. I realize the ask so just ignore me if it’s too much. I can locate everything just don’t want to buy then need something else and have to keep waiting for shipping.


r/ShotshellReloading • • Oct 01 '25

Should you reload shotshells?

3 Upvotes

With hunting season starting up, I'm anticipating a wave of "shell" shocked customers looking at the price of factory hunting ammo and wondering if they should start reloading. My general suggestion is to consider reloading if you cannot get your hands on the load you want in a factory box. 410 and 28ga shooters will understand that ammo availability can be tricky at best sometimes.

Can you save money? You can with lead field loads. I can load 1300 fps 1 1/4oz. ammo for ~$10/box with my component prices. I'm seeing similar ammo at around $20/box. However, I need to buy ~$200 in components, so I don't start saving money until my 2nd flat of shells (ignoring the cost of equipment). The good news is components like shot and to a lesser extent powder is shared a little across multiple loads and gauges. If you reload pistols, there's a lot of overlap in powder, so you may not need new powder. Generally, the $10-15/box for magnum loads has been my calculation, so the higher your factory ammo price, the more savings you realize.

I haven't delved into reloading shot other than lead. Steel is tricky right now due to critical powders being unavailable. Bismuth and tungsten prices are high, so it's a lot of money up front to get into it. You'll have to run you're own calculations for if this is worthwhile to you.

This is all based on my experience and research. I encourage the reader to be skeptical, and anyone with alternative views and experience to get involved in the comments.


r/ShotshellReloading • • Oct 05 '24

Federal Gold Medal

0 Upvotes

Does anyone have an 12ga Federal gold medal plastic 2 3/4 hulls with an 8 point crimp that they would like to get rid of? I’m wanting to reload some 00 buck.


r/ShotshellReloading • • Dec 06 '25

These Are Ridiculous

Thumbnail reddit.com
0 Upvotes

r/ShotshellReloading • • Oct 28 '25

Has Anyone Tried W231/HP-38 In Light Shotshell or Mini Shell Loads?

0 Upvotes

I'd like to figure out a recipe for W231/HP-38 for a 5/8 ounce to 3/7 ounce #0 buckshot load in mini shells. Has anyone already done that?


r/ShotshellReloading • • 24d ago

Powder availability

Thumbnail reddit.com
0 Upvotes

r/ShotshellReloading • • Feb 06 '25

Is a wax slug the cheapest slug you can load into a 12 gauge shell without casting your own slugs?

5 Upvotes

I was thinking of using wax slugs to make cheap training rounds because my local range only allows slugs on their pistol and rifle ranges.

If I do make the wax slugs, I was thinking of using about 80 grains of blackpowder, a nitro card, maybe some fiber cushion wad, the shot cup from a 1 oz target wad filled with birdshot and wax (or hot glue) and more overshot cards if necessary for stack hat.

I just need the slug to punch paper. If I wanted to load slugs with some real stopping power, I would just buy slugs from Ballistic Products or something.


r/ShotshellReloading • • Jan 15 '25

Crimp sadness

Thumbnail
gallery
5 Upvotes

Long time pistol/rifle loader but new to shotshell. When I’m doing brass I use range pick up so I’m guessing hulls aren’t as versatile or forgiving but not sure. I didn’t use the exact hull they specified on the data but I figured it would be ok and I’m starting to doubt that train of thought. The rest of the data was used accordingly. My question is as the pictures show. What am I doing wrong with the crimp? Do I need cards in there? Thanks for your help in this matter because it’s driving me nuts.

Data Fiocchi 2 3/4” hulls 616 primers WAA12 wads Long shot under a 1 1/8 oz 7 1/2 shot load Using a Lee Load All


r/ShotshellReloading • • Nov 02 '24

These hulls suck!

Thumbnail
gallery
6 Upvotes

I know I am a little bit late to the game, but these new gray Winchester AA hulls on the left suck compared to the one on the right. The hull on the left is a super sport and the one on the right is a light handicap. I’m reloading them the exact same way and look at the difference in the crimp. Just insane!


r/ShotshellReloading • • May 16 '24

Ruined?

Post image
1 Upvotes

I've cast up a handful of 1oz slugs, pried open some estate target loads (1 oz #8), poured out the shot, seated the slug with a finger, and re-crimped using a Lee load-all II.

Most of them went really well, but for these three I had the bright idea to seat by using the wad seater. I thought I pressed lightly, but after crimping it appears I seated them way too deep. Leverage works too well.

I assume these are un-salvagable and I should just cut them open for the slugs?


r/ShotshellReloading • • Aug 19 '23

Spitting shot

Thumbnail
gallery
1 Upvotes

I loaded fiocchi 2 3/4 hulls with 24 grains of Longshot and 1 oz of BB with cheddite cx2000 type 209 primer. First two fired fine. The other three fired, literally spit the load out . The bbs didn't even make it through the cardboard and the wad bounced off of the target at 10 yards. Is this a primer issue. The primer has a good strike from the firing pin. I have loaded amd shot about 50 rounds with no issue until now.


r/ShotshellReloading • • Apr 26 '24

Cam and crimper on mec9000gn

1 Upvotes

Why does my 12ga mec9000gn crimp have slack in it? My other two old mec 9000's do not. They are tight. It works for the most part. But about every 10-20 shells I got a funky crimp. And the only thing I have different on this press is that main crimper. I feel like it moves too much.


r/ShotshellReloading • • Jun 02 '23

12ga DIY steel slugs

Thumbnail
imgur.com
1 Upvotes

r/ShotshellReloading • • Apr 16 '26

How the Pros Ensure 100% Reliability Every Time.

Thumbnail
youtube.com
0 Upvotes

r/ShotshellReloading • • Jun 09 '25

Misc reloads

Post image
7 Upvotes

So I reloaded 12 gauge with eraser tips, plastic air soft rds, road salt. Wads went out about 50’. Not sure if the spread pattern. Maybe great for the first rd for home defence


r/ShotshellReloading • • Jun 05 '26

You gotta do, what you gotta do.

Thumbnail gallery
7 Upvotes

r/ShotshellReloading • • Nov 14 '24

Question

Post image
2 Upvotes

20ga Fiocchi (new)

1/2 card wad

Barrel .608

Lyman sabot slug .573 resize to .557

CSD Wad .552 wall thickness .029

.608 - .029 - .029 = .550

Would this be too tight to shoot ? My thought would be to resize to .557 as you would treat a cast boolit .002-.003 larger.


r/ShotshellReloading • • Oct 31 '23

Asking for advice on a DIY reload

0 Upvotes

I made rock salt rounds for home defense. One is wadded with:

  1. Water bottle cap cut out
    2)Cardboard
    3)school glue
    4)another piece of cardboard all tamped down

the other was just poorly recrimped because I didnt cut it the second time. I don't have any special tools for it, and wanted to see what I could do. I have no concerns about the recrimped one because I just opened it a little and then emptied and refilled it and then closed it again the exact same. I'm not worried the second one might blow up in my face (unlikely its literally Elmer's glue and cardboard) but Im more worried about coating the inside of my gun in sticky residue. I live in Texas so it is legal for home defense, and I plan to use it only as a last resort/deterrent in the chance of a home invasion, I just want to know if you think it will destroy my gun or not.

P.S. I know it sounds stupid, but I'm probably never going to have to use it so I didn't want to pay for a crimping tool/machine


r/ShotshellReloading • • Jun 24 '23

Help with a manual. TIA.

Post image
2 Upvotes

I’m just starting to dive into shot shell reloading after years of metallic loading. My Lyman 5th will be here in a few days. I’ve watched a few videos and read a few reviews and a lot of them claim that it has super limited data for buckshot and slugs but great data for a beginner. Can anybody recommend me a good manual with the most buckshot and slug load data. I plan to load mostly 00 buckshot. I’ll move to slugs when I get more experience. Don’t plan to load many bird loads if any at all.