r/ScrapMetal • • 4h ago

What would you break down vs scrap as-is to make the most money?

Thumbnail
gallery
1 Upvotes

I’ve got everything pictured plus another 10-20 compressors that aren’t shown. Trying to figure out the best way to maximize what I get out of it without wasting hours on stuff that barely pays extra. I’m an HVAC & appliance repair technician, So this has been my collection over the last 8 months

For those of you with experience, I could really use some advice.

If this was your pile, what would you do first? What would you strip down, what parts would you pull, and what would you leave alone? Im mainly looking for the best return on time spent. If something takes 10 minutes to break down and makes an extra $20, I’m all for it. If it takes an hour to make another $5, I’d rather skip it.

Take a look at the pictures and tell me exactly what you’d do in my position. Especially interested in hearing what you think is worth the most, what people commonly overlook, and what isn’t worth the effort.

Appreciate any tips from people who’ve actually scrapped this stuff before.


r/ScrapMetal • • 6h ago

Scrap Photo 💸 Romex

Post image
4 Upvotes

I’ve been testing the vevor wire stripper now for a week. There was a learning curve to it at first here is what you need to know this is for the new guys like myself. If the cables are hair like leave it alone. If it’s Romex cables sell as is. If it’s stove cables or dryers cables. It’s best to use knife or sell as is. This machine better for solid copper cables. Just my experience from working on it.


r/ScrapMetal • • 7h ago

Sale

Post image
1 Upvotes

So for anyone who hasn't bought a wire stripper yet, I saw this one on tiktok shop that is 7 channel instead of 1 for the price of a 3 channel one. Just thought I would put yall on


r/ScrapMetal • • 9h ago

New to scrapping and collected these gold corner BGAS

Thumbnail gallery
1 Upvotes

r/ScrapMetal • • 9h ago

Scrap Photo 💸 Pita wires

Post image
5 Upvotes

Hey guys, my name is Alvin Chica. I am from Omaha Nebraska and I do scrap metal and recycling as a hobby and also to make money in the winter lately. I’ve been testing my vevor wire stripper. I realize that wires that are from appliances are too small and messy to work with even the wires from extension cords are huge pain in the ass. So my conclusion is. If the wires are number 2 copper and it’s hair like wires it’s not worth doing. While there are solid wires where you can strip and comes out easily that’s the go to.


r/ScrapMetal • • 10h ago

Scrap Photo 💸 Cleaned up junk left over from our old corral.

Thumbnail
gallery
21 Upvotes

r/ScrapMetal • • 11h ago

Good day at the yard!

Thumbnail
gallery
14 Upvotes

r/ScrapMetal • • 12h ago

Scrap Photo 💸 Northeast Ohio prices

Post image
2 Upvotes

r/ScrapMetal • • 12h ago

BEAUTIFUL 🎀⚡️

Post image
3 Upvotes

Siemens Sentron 400AMP 💥


r/ScrapMetal • • 12h ago

Acquired Breakers⚡️

Post image
2 Upvotes

Siemens Sentron Series 200amp 💥

BEAUTIFUL!!! 🎀


r/ScrapMetal • • 13h ago

Copper motor

Post image
8 Upvotes

Man im having extreme trouble this motor was probably 400 lbs to start and I cut one side of ive never done this before how do you guys get it out this big ive used a hammer and chisel its not wanting to budhe


r/ScrapMetal • • 14h ago

Get to work!

Thumbnail
gallery
260 Upvotes

r/ScrapMetal • • 14h ago

Like buses. Nothing then 2 at once

Post image
1 Upvotes

r/ScrapMetal • • 15h ago

Some of my finds

Thumbnail
gallery
5 Upvotes

Two motors from my adventures last night. Did well.


r/ScrapMetal • • 17h ago

What’s this aluminum worth?

Post image
0 Upvotes

I have this aluminum ramp and I’m curious what the scrap value would be.

As far as I can tell it’s +- 3/8” thick and weighs several hundred lbs.

Dimensions are 6’ long, 37.5” wide, 5.5” high.

Located in Ontario 🇨🇦 (I understand scrap values fluctuate by location.

Thanks in advance for any info on value either scrap or private sale. (NOT listed for sale as per the thread rules).


r/ScrapMetal • • 19h ago

Extruded aluminum I beam?

Thumbnail
gallery
12 Upvotes

Is this extruded or sheet aluminum?


r/ScrapMetal • • 22h ago

Ask: how to insulate Garage that doesn’t have extension sheathing?

Thumbnail gallery
0 Upvotes

r/ScrapMetal • • 23h ago

Question 💫 I feel like we got kinda raped.

Thumbnail
gallery
0 Upvotes

Solid copper bus bars from the late 80's but still super clean and bright. We had figured that they might be either Cu #1 or even bare bright (we were turning in a good amount as well), but found out they were firm at Cu #2B

Does this seem right ? Copper 2B is heavy patina, burnt, soldered, coated in plastic or super old and nasty which is fair but the coating or whatever it is on the copper seems very light.

We kept one to try and hit with the wire wheel and see if they call it something else.

Waste of time ?


r/ScrapMetal • • 1d ago

Scrap Photo 💸 Update: electric motors

Post image
15 Upvotes

So I posted earlier this week about some electric motors my boss let me keep from a larger demo/disposal. Cut four so far, brought windings from the first one to the local metal yard to make sure it was something before i kept going, theyre considering it #2 at $4.60/lb. Bringing 24 lbs of insulated as well. Attached photo is my current yield of 11.3 lbs from the 4 motors I pulled windings from. Still need to clean it up and pull that small amount of insulated, but they said they didn't care about the small amount of binding thread, just no tape or insulation. Getting more efficient speed wise as I go, plus I was on the clock during, the system they came from is considered hvac/appliance at the dump so its only a short step beyond the required disassembly needed for disposal. Considering i had nothing to lose from it, and all gear was leftover from the original task, not bad in my book.


r/ScrapMetal • • 1d ago

Looking for scrap coil

Post image
0 Upvotes

Sorry ahead if I dont make myself clear

But I am looking for steel coil .029 to 0.035 inch to import to Mexico for various uses. I need a hint to where start looking. Thanks in advance


r/ScrapMetal • • 1d ago

What to do with 60' long 3" diameter chromoly shafts?

2 Upvotes

Shafts from an old mill. Ran on babbit bearing blocks each 15' feet directly onto this smooth machined shaft.


r/ScrapMetal • • 1d ago

Scrap Photo 💸 Brought some nicer stuff this time

Thumbnail
gallery
37 Upvotes

A compressor from a car and another from a giant air tank both got accepted as electric motors, which is a bit more so I was happy about that.

2015 Mitsubishi Mirage 270k miles


r/ScrapMetal • • 1d ago

Paid $200 for this 400lb Air compressor what do you think should we fix it.. or should we scrap it!

Thumbnail gallery
0 Upvotes

r/ScrapMetal • • 1d ago

Hobart Handler 150 Scrap

Post image
11 Upvotes

I got all of this out if a small briken welder i had. not bad for my first step into scrapping. gonna get my crucible setup and some jewelers tools to start making rings and bracelets