r/SN95Mustang • • Jun 09 '17

Calling all Subscribers!

9 Upvotes

Hello everyone,

Recently I had a request from someone to become a mod and help with the subreddit. What I found however, is that they invited another person, and the two of them removed all content and basically destroyed the sub. I am hoping that you guys can help get some content back on the pages, and get the sub going again.

Thanks!


r/SN95Mustang • • 1d ago

Clutch?

Post image
15 Upvotes

I replaced the clutch, flywheel, pressure plate, and throw out bearing in my 96 gt. For some reason now I can feel my clutch pedal vibrating and a squeaking noise. When I press the clutch in about 10% the noise goes away. Also when shifting into first and starting to move a loud clank happens. Only in first though. Obviously I did something wrong but what? Pilot bearing was not replaced because it looked good but I do have one. Clutch cable is not loose. Most likely going to drop it out again but when we did we had to pull the transmission in with the bolts because it wasn’t lining up great.


r/SN95Mustang • • 3d ago

96–98 Cobra Owners: What Lower Radiator Hose Are You Running?

Thumbnail reddit.com
3 Upvotes

Anyone with a 1996–1998 Mustang Cobra ever have to replace their lower radiator hose?

I have a 1996 Cobra and I’m currently trying to find an OEM lower radiator hose (F6ZZ-8286-C). The shop I’ve been taking my car to told me aftermarket replacements don’t fit properly.

They recommended a parts supplier but I’m wondering if anyone here has replaced theirs, what brand they used, or if anyone happens to have an original Ford hose available.


r/SN95Mustang • • 5d ago

Handbrake problem

Post image
5 Upvotes

I’m having an issue with my parking brake. It doesn’t tighten enough. When I’m parked on a downhill slope and pull the handbrake up, the car still slowly rolls downhill.

I’ve adjusted it to 3 clicks on the ratchet, so if I tighten it any further, the brakes will start dragging.

How can I get the parking brake to hold properly without the brakes dragging?

Thanks for all the answers and help! :)


r/SN95Mustang • • 7d ago

What is this?

Thumbnail
gallery
34 Upvotes

Is this a custom front end? Is there somewhere you can buy this? I swear I’ve seen it before


r/SN95Mustang • • 7d ago

Finally got her running and test drove it

22 Upvotes

Finally drove my budget drift car around the block. She’s rowdy. Hoping to get that exhaust quieter soon too. But super excited to finally get it moving


r/SN95Mustang • • 8d ago

Just finished putting newedge seats on

Post image
44 Upvotes

It was super easy, just had to make new plugs for the driver seat, everything else directly bolted in!


r/SN95Mustang • • 8d ago

What’s this 96 worth to you

Thumbnail
gallery
62 Upvotes

Offered 6500$


r/SN95Mustang • • 10d ago

Does the rear need lowering

Post image
127 Upvotes

Steeda springs, x2 balljoints and no isos all around. Does the stance look too raked-- should I drop the rears more or looks fine?

Fender clearance is easy 3 fingers rear, lil under 2 fingers front. Cause thinking, only way to drop rear more was getting Adj LCAs to drop 0.5". And I'm about to repair my MM non-adj LCA spherical bushings (old) so would swap to adj if I should lower the rears. Then again saw the all street/strip adj LCAs support upto 450whp and I'm at 600+ (which the non-adj do fine).

Runs fine on LA streets with no isos surprisingly. No squeaks . No need to roll fenders too.


r/SN95Mustang • • 10d ago

Help identify/fix this coupling thing

2 Upvotes

hello everybody hows it going ive finally tracked down this huge radiator fluid leak and its coming from this joint at the end of the video, sorry its not great quality i hope somebody will be able to tell me what the part is called, i dont see it when i try to look for bulk radiator hoses/parts and not sure where it goes, any help is appreciated this is my 4.6l v8 from 96


r/SN95Mustang • • 11d ago

The Comeback Cobra at the Hot Wheels Halloween Car Show at Lanier Technical College

Thumbnail
youtu.be
0 Upvotes

r/SN95Mustang • • 12d ago

What side skirts are these?

Thumbnail gallery
12 Upvotes

Would love to find these for my son's 2001 Mustang


r/SN95Mustang • • 12d ago

1994 Mustang GT 5.0 – Misfiring and Backfiring

3 Upvotes

I have a problem with my 1994 Mustang GT 5.0. It misfires and as a result, backfires. The backfires only come from the right exhaust pipe (I have an X-pipe).

I cleaned the distributor but it made no difference.

Has anyone had the same problem or knows what could be wrong?

Thanks for all the replies, I really need help on this one :)


r/SN95Mustang • • 13d ago

Needs some headers

3 Upvotes

Looking for some long tube headers for a 1995 5.0. I would prefer stainless steel but not against others. I’m just trying to find some that are budget friendly if you know what I mean


r/SN95Mustang • • 14d ago

Ignition Control Module

5 Upvotes

Anybody else having a problem with these module dying over and over?


r/SN95Mustang • • 15d ago

finally killed the 4.6

1 Upvotes

serious blowby, burning oil and when i removed the passenger valve cover i found metal near the galleries. could also be lack of oil reaching my passenger valve, a master tech i spoke with said it looked dry in the cover but i didnt find any metal in my drivers side cover or the oil when i drained it. any tips for the rebiuld?


r/SN95Mustang • • 16d ago

Air Bag Module Removal

3 Upvotes

Greetings I have a 96 mustang I bought it had been wrecked while I repaired the car and had front end repainted and including replacing the airbags because they popped. Anybody know how to get the air bag module out so it can be reset or repaired? If so any tips I’m aware it’s behind the console. Thanks!


r/SN95Mustang • • 17d ago

Strut tower rust repair

Thumbnail
gallery
3 Upvotes

Looking at buying a 95 GT with under 100,000 miles. While looking for rust, I noticed that the strut towers look to be repaired already. How worried should I be about this? Should I pass on the car? how do I know if this repair is good or bad? I don’t live in a rust state but this car is from the northeast.


r/SN95Mustang • • 17d ago

Opinions wanted

3 Upvotes

Hi everyone, I have a 98 v6 that I’ve been trying to learn on and fix myself. My goal is just to make a clean daily driver and the main things I want to fix right now are a rough idle when I come to a stop and an engine oil leak from the transmission bell housing.
The fixes I think will get the job done would be replacing the motor mounts and replacing the rear main seal for the leak.
Both of these sound pretty labor intensive and I’m not sure I even have all the right tools. I imagine a mechanic will charge a lot too.

And I guess my questions after all that is, what would you do in my situation?


r/SN95Mustang • • 18d ago

Came out to this earlier. My 95 and a person looking to steal my thunder.

11 Upvotes

Im kidding. It was cool and after I snapped the picture another guy came up and said how cool the "really old car was". I didn't know how to take that, since I used to sell 95 Mustangs lol but cool generational shot.

1995 triple black and guest


r/SN95Mustang • • 19d ago

New Edge’s or SN95’s? 🤔

0 Upvotes

I mean.. If I had to put it into words, An SN95 Is like a hot blonde . The New Edge is akin to a Milf you cant choose. So.. SN95 or New Edge. 👍👀


r/SN95Mustang • • 20d ago

SN95 & Newedge Painted Mirror Covers

Thumbnail gallery
7 Upvotes

Link: newedgemirrorcovers.com

Hey guys! I've been working on a little project recently and figured I'd share it here for anyone who might be interested.

I originally made these mirror covers for my own Mustang because I wanted the Cobra mirror look without spending a ridiculous amount of money on actual Cobra mirrors.

After seeing how they turned out, I figured why not make them for other SN95 and New Edge owners too?

They're made to fit over your existing factory mirrors and come painted to match your factory colour, so there's no need to replace the whole mirror assembly.

I just launched my little website for them as well! Feel free to check it out, and if you have any questions or are interested, shoot me a message!

Thanks guys, I appreciate it!


r/SN95Mustang • • 21d ago

Can somebody who drove both the 4.6 and 5.0 tell me what’s the main difference?

10 Upvotes

I’ve only ever drove a 4.6, is there really any difference with the 5.0?


r/SN95Mustang • • 22d ago

Shorty headers

6 Upvotes

I am building a 331 with a vortech s trim for my 95 and currently have bbk equal length shorty headers. The more im reading about the nightmare of install/plug access for equal length, the more im thinking of ditching them for unequal shorties.

Anyone have any first hand experience ?