r/S2000 • • 1h ago

F20C appreciation

Post image
31 Upvotes

I made a little display at the last car show I went to featuring my Miffy and an autographed radio door I got signed by a Japanese F1 driver


r/S2000 • • 12h ago

beautiful fall drive today 🍂

Post image
136 Upvotes

r/S2000 • • 22h ago

S2000 Crash in NJ this morning - be mindful of tire temperatures, people

636 Upvotes

r/S2000 • • 15h ago

One last cruise before storing for winter 😪

Post image
88 Upvotes

Enjoy your s2k yall ! Mine will be sitting for a couple months till it’s nice out.


r/S2000 • • 1d ago

400hp daily driver

Post image
794 Upvotes

@LCJ4.S2K on insta 🫡


r/S2000 • • 16h ago

Which one of you went full Mustang?

68 Upvotes

r/S2000 • • 13h ago

Almost done! We apologize for the long wait!

31 Upvotes

We wanted to share another sample photo of our upcoming MITA AP2 Center Console, which has unfortunately experienced some delays but is now approaching the final stages of production.

Nearly every component shown has been developed and manufactured by MITA Motorsports, including the shift boot, shift boot collar, rubber trim, switch panel, and drink tray panel. The drink tray assembly and armrest are the only exceptions.

We also wanted to clarify something regarding the console's surface and overall finish.

There has been some discussion suggesting that our center console has two dimples near the armrest area, similar to what has been observed on other aftermarket AP2 center consoles released this year.

To clarify, none of the production samples we have shared have exhibited these dimples. We specifically chose to photograph this sample without the final OEM-style leather grain texture so that the surface contours and finish could be seen more clearly.

We specifically chose to photograph this particular sample because it has not yet received the final OEM leather grain texture. Without that texture, the surface is easier to examine, allowing everyone to see the contours and finish without anything obscuring the details.

We understand that discussions and speculation are inevitable when developing replacement parts for cars as beloved as the S2000. However, we believe it's important to distinguish actual product characteristics from assumptions being circulated online.

We've always preferred to let our development work and actual samples speak for themselves.

The next step is applying the final OEM leather grain texture, bringing the console closer to the appearance and feel of the original Honda component.

We're almost there, and we appreciate everyone's patience as we work toward getting this right.


r/S2000 • • 1d ago

Some pics of when we rented this S2000 in Japan.

Thumbnail
gallery
276 Upvotes

We started in Tokyo, drove through Hakone Turnpike, Ashinoko Skyline and stayed in Kawaguchiko. 10/10 would recommend to anyone in this group planning their Japan trip.


r/S2000 • • 18h ago

Little drive by

28 Upvotes

Invidia N1 dual exhaust with test pipe.


r/S2000 • • 23h ago

HONDA S2000 / 34 KTM 231

Post image
62 Upvotes

r/S2000 • • 5h ago

S2000 Spoon Calipers

Post image
2 Upvotes

I have a 4 set left coming early Feb! November shipment is sold out. Selling them for $1350 shipped if anyone is interested. DM me on IG.

IG: ChamplinJDM

Feel free to hit me up if you want reserve a set!


r/S2000 • • 14h ago

2006 S2000 AP2 — Intermittent misfires, P0339, rough idle, bucking under load. Possible CKP sensor or engine issue?

4 Upvotes

Looking for some advice from other S2000 owners. My 2006 AP2 (F22C, ~153k chassis miles, rebuilt engine) has been having intermittent misfires and some strange behavior.

What happened:

I was driving normally, did a WOT pull, then downshifted from 3rd to 2nd and eventually into neutral. No over-rev or money shift.

Shortly afterward, the engine started misfiring slightly, progressively got worse, and began making knocking/rattling-like sounds. I noticed white smoke or vapor coming from the front/intake side of the engine bay and shut the engine off.

It initially struggled to restart, but eventually started and idled smoothly again. The smoke hasn't returned. However, when driving slowly in first gear, it bucks/hiccups even after the clutch is fully released.

I've also noticed RPM hunting/surging at red lights roughly 50% of the time.

OBD codes:

P0339 — Crankshaft Position Sensor A Circuit Intermittent (stored)

P0300 — Random/multiple misfire (pending)

P0301 — Cylinder 1 misfire (pending)

P0304 — Cylinder 4 misfire (pending)

P0339 freeze-frame data:

RPM: 912

Speed: 0 mph

Coolant: 187°F

ECU voltage: 12.7V

Calculated load: 100%

MAP: 51 inHg (seems incorrect for an NA engine)

Recent work:

Denso fuel pump

FIC 365cc injectors

OEM ignition coils and spark plugs

OEM alternator and tensioner pulley

Valve adjustment

Custom Hondata FlashPro dyno tune after repairs

Other modifications include an M&M oversized throttle body, Password JDM intake, custom catch-can setup, and an EVAP delete.

The previous shop did a borescope inspection during an earlier issue and reported that everything looked fine, but I don't have current compression or leak-down results.

I'm wondering whether this is a failing CKP sensor, wiring/ground issue, vacuum leak, fueling problem, or potentially something mechanical.

Has anyone experienced P0339 combined with multiple misfires and intermittent bucking? What ended up fixing it?

I'm not driving the car anymore until an independent shop diagnoses it. Trying to avoid throwing more parts at it.


r/S2000 • • 21h ago

Who does soft top installs around north NJ?

Post image
7 Upvotes

Also what’s the best time of year to do it? I’m prepping to put mine away for winter now so don’t know if now is best or wait till spring-ish when it comes back out.

I’m getting a leak into the trunk from what I believe is the circled area


r/S2000 • • 1d ago

Accidentally ripped J’s racing lower ball joint grease boot

Thumbnail
gallery
18 Upvotes

Hi folks, I accidentally made a small rip (3mm) on the grease boot while installing J’s racing s2 front camber joint, and I sealed it with black rtv silicone gasket maker.

Anyone happens to have experienced this and know how long this is going to last me? What part number is J’s racing lower ball joint boot if I want to replace the boot later? (I tried searching the grease boot up, but it doesn’t look the same as the one I have). Thanks in advance for any input.


r/S2000 • • 1d ago

Clutch Master Cylinder

5 Upvotes

I was under the dash replacing the switch stopper for the clutch/cruise control and saw this on the clutch master cylinder. Is this an issue with a 26 year old car? Do I need to do anything?

TIA!

Edit1: Thanks, all, for your input and guidance. My CMC looks "dirtier" than many of the other pictures I found on Reddit or elsewhere, then to my surprise the fluid in the reservoir looked surprisingly clean and was full. My unscientific analysis of responses and approaches indicates 50:50 between flush and replace. I'm OK with the cost of a replacement, but don't look forward the replace and bleed process, so I'm going to give the flush a shot then replace if that doesn't work. I did my first flush last night. Stay tuned.


r/S2000 • • 1d ago

THE LOW POWER TRACKDAY EXPERIENCE VOL 5

Thumbnail
youtu.be
4 Upvotes

r/S2000 • • 2d ago

Something I did for fun

86 Upvotes

I had a aftermarket key fob that wasn’t worried about, so I stole all the parts and made a new pcb. Bought a 10th gen Civic Type R key fob from EBay (that’s what listings said it was anyways ¯_(ツ)_/¯ .)

Asked a coworker to help me with getting started in Altium. Literally would not been able to do this without his help.

I am not the first to do this, nor am I claiming this as an original idea. I have seen those custom bodies with a flip key, so I thought a CTR key would be interesting.

I will reply with some pictures from Altium, and some photos of the bare PCB.

Might do the 11th gen someday. Also, I want to do the swap to a laser cut key so I can actually use the keyblade.


r/S2000 • • 2d ago

Interesting comparison

Post image
132 Upvotes

Came across this memory in my photos, my S2000 rear tire next to my Dodge Viper rear tire. Pretty wild seeing the difference side by side 245/17 vs 345/19 😅


r/S2000 • • 2d ago

Honda Heritage Parts Accepting Requests For Parts From Models Other Than The NSX

Thumbnail
reddit.com
83 Upvotes

Just leaving this here


r/S2000 • • 3d ago

Vivid orange Beauty

Thumbnail
gallery
290 Upvotes

* pics taken from car meeting


r/S2000 • • 2d ago

AP2 Recall: Fuel Flange Joint

Post image
41 Upvotes

Received this email from CarFax today. Is this legit?


r/S2000 • • 3d ago

Oil leak advice needed

Thumbnail
gallery
16 Upvotes

Hi guys

Judging from both pictures it doesn't look very good

I don't have that much knowledge to know what is happening here, definitely some sort of high pressure at the top of the engine or maybe just the gascets, but they all leeked at the same time

I was in the process of swapping the battery, and it wasn't there a few weeks ago when I added some oil in the engine

I'll check the comments for your advice and possible explanation, I don't have access to advances tools and no lift

Thanks in advance 🙏

UPDATE: It turns out all of them were loose, I will torque them tomorrow to 12nm as said in the comments (my key only allow from 0.5nm to 0.5nm) Thanks for all of you advices, I cleaned everything with brake cleaner and it if leaks again I will replace the gaskets 🙏


r/S2000 • • 2d ago

Seal Skin vs Cover Craft

2 Upvotes

Which is the better option for an outside cover? East coast winter?


r/S2000 • • 3d ago

Front Lip

Post image
65 Upvotes

I bought a Bayson R front lip and installed it but it has quite a bit of play, anything I can do to tighten up the fitment? TIA