r/Revolvers • • 4h ago

Model 19-5

113 Upvotes

Taking the Cadillac for a spin today.


r/Revolvers • • 2h ago

Revolvers are Awesome! Don’t listen to what TacBros gotta say, just enjoy that Wheelgun!

Post image
75 Upvotes

Here is a Revolver meme to brighten up your day folks, because I’ll be real. I love my RXM, and I love my AR, but I am also one to enjoy Wheelguns because the level of Craftsmanship behind it, it’s beautiful.

In fact, I own a Colt Python .357 Magnum 6 Inch, and I grew up watching The Walking Dead, and that TV Show made me want one, and eventually I did actually get one!

Another fun fact, one of the biggest drivers for the Colt Python to be brought back into mainstream production was all thanks to The Walking Dead reviving the demand for it. Yes you could argue that Colt is appealing to Nostalgia now that CZ owns them, but you cannot deny that the market for the Python grew when the TV Show came out.


r/Revolvers • • 49m ago

It's been too long...

Post image
32 Upvotes

r/Revolvers • • 7h ago

Smith 640-1

Thumbnail
gallery
91 Upvotes

I’ve been looking for a nice 640-1 for quite a while and finally picked this one up. My first carry gun was a Chiefs Special Model 60, and I regretfully let that one go years ago, so this one has a bit of nostalgia attached to it.

This one dates to 1995, which, as I understand it, was the first year of production for the 640-1 and made it one of the first .357 Magnum snubbies. Looks unfired and I got the original box which is cool.

I’m excited to get it out to shoot, though I’m still mulling over what ammo I want to run in it.

I’ll probably replace the laminate stocks with a set of Hogue wood boot grips, either cocobolo or pau ferro. I’m just not much of a laminate-grip guy.
Just wanted to share. It’s nice finally finding one I’ve been looking for.


r/Revolvers • • 3h ago

Inherited a S&W model 49-1

Thumbnail
gallery
40 Upvotes

I just figured id show off 1 of the new additions to my collection. Its my grandfather's model 49-1 that he only put a box of wadcutters through since he bought it new. It looks so nice sitting next to my model 36 no dash. Unfortunately it sat in his safe pretty much untouched and was rarely cleaned so excuse its dirty looks and the 36 looks the way it does because I carry it every day


r/Revolvers • • 9h ago

What are your thoughts on the 2017+ Colt Cobra? I personally love mine.

Post image
73 Upvotes

r/Revolvers • • 2h ago

The other set of grips

Thumbnail
gallery
15 Upvotes

I posted a while ago about putting a Recoil Rider K/L Frame CCW grip on my S&W Model 12 Airweight. I commented that now I needed to decide what revolver to put the second one I bought on.

Today I needed to reorganize the revolvers. This caused me to consider which one to convert.

I settled on my Model 10-5 with the bobbed hammer (first image). As I sat there with the screwdriver to remove the existing grips, I noticed that they really suit that gun. They show the same wear as the rest of it. It is not a bad shooter with those grips, and they do carry well.

So I returned it and selected a different Model 10, this time a -7, which appears to have been nickel plated at the factory. I had already replaced the grips on it with S&W Combat Grips, so there was no angst in changing them (second image).

Will be carrying this sometime this week. And likely that bobbed 10-5 too. They don’t disappear like the J’s do, but they are more comfortable than the pistols I sometimes carry.


r/Revolvers • • 9h ago

Keeping it simple - S&W 642-1

Thumbnail gallery
36 Upvotes

r/Revolvers • • 18m ago

Speedloader pouch for carry

4 Upvotes

I occasionally carry one of several revolvers for concealed carry and I use HKS speedloaders. I have the standard HKS Products leather dual speedloader pouch and a have a no name nylon version of the same thing. I like the quality of the leather one over the nylon but the leather one uses button snaps vs. the nylon pouch which uses Velcro. The button snaps don't like to stay snapped. The Velcro stays shut but the quality of the nylon pouch is poor enough that it rolls up on the belt. So.... if you carry HKS style speedloaders, how do you prefer to carry them? I typically wear jeans and sticking the speedloader in my pocket makes a big bulge that might impress the ladies, but that's not really what I'm looking to do here. ;)


r/Revolvers • • 19h ago

Which S&W is this?

Post image
71 Upvotes

Would love to give my dad another model like this for a birthday gift but the frame doesn’t say what model it is. 357 mag for reference.


r/Revolvers • • 12m ago

Transfer Bar

1 Upvotes

Honest question, I bought my first revolver about 8 months ago now, it’s a .44 mag Ruger Super Blackhawk. I absolutely love this gun, it’s easily became my favorite firearm.

My Blackhawk does not have a transfer bar. It’s old school and I really love the trigger the way it is. But I just wanted to ask for some other opinions , Do I really need to add a transfer bar?

My brothers and some in laws are taking a trip up north and we’re going hunting and I intend to have this pistol be my side arm on my chest rig but Ive been back and forth on getting a transfer bar installed before we go. I’m all about safety, but I’m having a hard time with the thought of this change.

If anyone has an opinion on this, I appreciate any and all comments. Thanks for reading.


r/Revolvers • • 3h ago

Pawl spring woes

2 Upvotes

Good afternoon revolver fans let me set the stage for you, so there I am larping the gunsmith I think I am swapping the grip frame on my Ruger newmodel Blackhawk from the alloy one to a steel frame I got off numrich, there I am finally getting it assembled and screwing everything down and it looks good until i notice the cylinder is no longer indexing or locking up. Then i spot a tiny gap in the upper left corner of where the grip meets the rest of the frame, whats causing this gap? Turns out in my excitement to finish the frame swap and send pictures of it to my buddies to brag, i torqued down on the pawl spring and kinked it to the point of no return. Anyways now I can't find any of them in stock in numrich and total radio silence from Ruger, eBay doesn't ship them to me (yes california will not let me ship a tiny spring to a residential), my question now to you all much more knowledgeable folks is could i substitute that spring for something else maybe a detent spring in an lpk i don't know how critical the proper tension is on this spring or should where should I look for that damn spring ? Any input would be greatly appreciated. I feel like a moron already so spare your comments pls thanks for reading


r/Revolvers • • 1d ago

Model 66-1

Thumbnail
gallery
254 Upvotes

Last account got deleted so reposting the ol 66-1. Still a constant dilemma between this and my model 19.. I guess there’s worse problems to have 😂


r/Revolvers • • 1d ago

Questions about this Colt

Thumbnail
gallery
105 Upvotes

I got this revolver from a pawnshop because I thought it was cool and I like old Colts, but I was wondering exactly what it is and is it safe to shoot as far as I can tell it’s an old British revolver mostly because I can see the word ELEY underneath the new stamping of Colt and appears to have been re-chambered into 45 long Colt. I’ve tried looking into the name that engraved on the side which is K.H. Warner thinking it might’ve been a gunsmith who did it, but I can’t find anything. Any information would be appreciated. Thanks.

I also have another revolver. I have some questions about, but I’ll post that later once I get around to cleaning it.


r/Revolvers • • 21h ago

Need some help from some SW aficionados

Thumbnail
gallery
44 Upvotes

I have an option to buy 1 of these , both 10-7s, the one on the left with the (combat?) aftermarket grips looks really good obviously,but maybe a little too good like it could be a refinish job , both come with boxes , idk if the first one comes with the original grips , I have pre model 10 round butt snub and I’d like a square butt but idk if what style the first one is , basically , is the first one refinished or just shined up real nice ? And is there anyway to tell if it’s round or square ? Or should I get the square butt ? Both are the same price both come with the box


r/Revolvers • • 1d ago

New Gun Day

Thumbnail
gallery
121 Upvotes

Ever go to the LGS to buy one thing but walk out with another? Saw the S&W Performance Center 19-10 Carry Comp in the “moss” ceracote and just couldn’t leave her behind.

Hopefully get to send some rounds down range in the next day or so.


r/Revolvers • • 10h ago

Thoughts on Bianchi X15 shoulder holster

5 Upvotes

At my age, lumber issues make carrying my K frame 4 inch on my waist (in any configuration) uncomfortable. I'm considering a shoulder rig for the first time. The Bianchi X15 gets good reviews. Does anyone have any experience with it, positive or negative? Comfort, quality, etc?


r/Revolvers • • 22h ago

Colt Single Action Army 3rd Gen.

Post image
30 Upvotes

A few weeks ago I bought an Anaconda. Now I just bought a SAA on Gunbroker. Hopefully it’s good, it’s a 1979. After I bought it I just found out on the internet that the quality of the guns leading up to the strike could be iffy.

Anyways, here’s a picture:


r/Revolvers • • 19h ago

S&W 350 legend?

5 Upvotes

Has anyone had any good or bad experiences with them? Not really familiar with that round, What are the advantages or disadvantages of having that round in a handgun?


r/Revolvers • • 1d ago

Ruger SP101 ✨

Post image
286 Upvotes

One of my favorite revolvers out of my collection. Just received it back from Ruger


r/Revolvers • • 1d ago

USFA 44 Special

Thumbnail
gallery
151 Upvotes

This one is a dual caliber, I have a 44-40 cylinder too. I just got it back with one piece grips installed. I love Single actions.


r/Revolvers • • 1d ago

SDR cylinder question

4 Upvotes

I have the hammered model. Seems like the cylinder requires a little more force to open then other revolvers I’ve owned. Does this seem to be the consensus with these? When pressing the button and pushing the cylinder it seems to catch for lack of a better word and I have to press somewhat hard for it open. Would this work its self out after more shooting or should I take to a gunsmith?
Other than that really enjoy it


r/Revolvers • • 1d ago

Differences

Thumbnail
gallery
56 Upvotes

Can anyone on here explain the legitimate differences between these two? And are the differences worth a 200 ish price difference


r/Revolvers • • 1d ago

MK-TEK Holster

5 Upvotes

Has anyone picked one up? Any info good or bad
Also info in a better holster


r/Revolvers • • 1d ago

Custom Super Blackhawk barrel

Thumbnail gallery
48 Upvotes