r/Retrofit • • Dec 02 '19

2004 E55 AMG - replacing factory Xenon low beams. Osram CBI, CBA, or CBB? I want white with a slight blue tinge to look like modern low beams.

0 Upvotes

As title says, I have a 2004 E55 AMG - replacing factory Xenon low beams. Osram CBI, CBA, or CBB? I want white with a slight blue tinge to look like modern low beams.

The current bulbs seem to be a bit dim and I think need replacing. I changed my city lamps to white LED so they have that blue tinge - my headlights currently are closer to a 5000K and I want near a 6000K range more pure white with some blue - I really just want the all the lights to match!!

What is the "real" difference bt CBI, CBA, CBB? I have read that in that order they go from more yellow to more blue, but the pictures online of the output are all over the place...


r/Retrofit • • Dec 04 '24

Need Ideas does anyone make a POD light in a driving beam pattern?

0 Upvotes

I don't think this exists and I don't quite understand why. There are POD style lights that come in a SAE fog pattern.

https://www.theretrofitsource.com/diode-dynaimcs-ssc1-sae-fog-light-pod-trs?quantity=1

Why don't these manufacturers simply make a POD light in a driving headlight beam pattern with the same optics/cutoff as the stuff they're selling to retrofit inside a headlight? Both would be just as "illegal" but the POD light would be way more convienent.

I'm talking about selling just a Bi-xenon projector or Bi-LED projector in a waterproof housing that can be bumper mounted. All you do is aim and run a harness. No baking and sealing and cutting templates, messing around with opening headlights. Something like this but with good components inside:

https://www.google.com/url?sa=i&url=https%3A%2F%2Fmotodemic.com%2Fshop%2Fmetric-style-headlamp-bucket%2F&psig=AOvVaw0B0UgSMvjMSWZX-9vOxQSo&ust=1733370452330000&source=images&cd=vfe&opi=89978449&ved=0CBQQjRxqFwoTCNC86KyajYoDFQAAAAAdAAAAABAK


r/Retrofit • • Jul 03 '23

Technical/Assembly Question Made the oven too hot by mistake and this spot caved in and became discoloured. Is it fixable?

Post image
3 Upvotes

Before I start sanding for hours, should I even bother?


r/Retrofit • • Jan 16 '25

Need Ideas Options.

Thumbnail
gallery
5 Upvotes

Looking for phenomenal retrofit options. I put in a set of Amazon bi-led projectors and their not terrible but the highbeams leave a lot to be desired. A ton better that the stock MK4 Jetta lights. When the shutter lifts its not any brighter just higher. I'd really like to have all the light and project that light as far down the way as possible. I live in central PA in farm country. Driving to work before sunrise, I could really use all the lumens.

Im game for seperate high and low beam projectors. I plan on cutting out the headlight housing and rearranging and making a hell of a project out of it.

Project that high beam as far as possible, as much light as possible, sharpest cut off on those low beams.


r/Retrofit • • Dec 28 '19

This is the kind of retrofit we just don't see very often for some reason!

Post image
7 Upvotes

r/Retrofit • • Jun 06 '23

Completed Build Here's a fun one. 95 Ram aftermarket headlights. Designed a full 3D printed replacement for the reflector to act as a combo mount and shroud.

Thumbnail
gallery
9 Upvotes

r/Retrofit • • May 15 '24

In Progress Dumbe Question

Thumbnail
gallery
2 Upvotes

r/Retrofit • • Dec 05 '24

Technical/Assembly Question Wiring question

Post image
4 Upvotes

I'm installing these soon on my car with a 9007 three wire connector. How do I wires these up? Do I need an LED/HID relay harness or directly to the OEM connector? Everything is find only talks about HID ballasts and not bi-led projectors.


r/Retrofit • • Jun 09 '23

Technical/Assembly Question Resealing Permaseal Headlight

1 Upvotes

I recently opened and retrofit a pair of headlights, that used some type of permaseal, getting them open wasn't too bad, but all of the permaseal stuck to the lens, an it has a thick border, an has proven to be almost impossible to remove, to clean up the lens for a buytl replacement seal, is there anyway to still put some buytl in the channel combined with the permaseal that would work to seal it backup?


r/Retrofit • • Jul 09 '23

OEM Hardware/Wire Info H4 convertion

1 Upvotes

Hello, I'm looking forward to retrofitting my headlights and I bought a pair of used ones which are different design but from the same car with same dimensions. The thing is that my headlight car is h7 and has a connector that goes into the headlight and then low beams and high beams (which are in two different parts of the headlight) has their own connector inside to connect the light. This new headlights I bought has no connector where the H4 goes. I assume that the other model of the car has the h4 connector into the car and goes to the headlight. In my mind thats pretty easy to convert, I need low beams and high beams positive to a h4 connector from my headlights socket and ground cable and thats it? Hope I expressed myself right and can give me a hand. Thanks!


r/Retrofit • • Jan 18 '25

Technical/Assembly Question Question about Bi LED Projectors Install

5 Upvotes

Hi all I'm new to LED projectors and want to retrofit an NHK 3.0 Bi LED in my H4 housing for my 00 Civic. I had a Clone of a Morimoto 3.0 D2S projector before with a Morimoto harness for the High beam shutter along with powering the bulbs which was pretty straight forward. Question I have is the NHK that I am looking at says it has a built in LED Driver and I'm wondering if that means I can just go ahead and use a harness for the High Beam shutter without an issue or should I use an external LED Driver as I've seen some projectors that don't have them.

Link to the one I'm looking at NHK MIni Bi LED Projector Lens 3.0'' Headlight 6000K Universal Retrofit LHD RHD | eBay


r/Retrofit • • Dec 31 '24

Technical/Assembly Question Bi-led Hi-beam wiring question

Post image
9 Upvotes

Hey guys my knowledge on electrical is bare minimum, anyways trying to figure this out and some help would be greatly appreciated. Im retrofitting some bi led projectors into my civic headlight housing. Low beams were a simple 9006 bulb and the high beam is 9005 bulb that also doubles as a DRL while high-beam is off running on a lower voltage than the high-beam. If i run a wire from the 9005 high-beam to the bi-led high beam will this work, or will the low voltage being sent for the drl while the high-beam is off flick on the Bi-led high-beam? Or will it need the full voltage to activate the high beam in the Bi-led?


r/Retrofit • • Jan 10 '25

Need Ideas HID projector questions for a 2014 Honda Accord Sport (Morimoto Mini H1)

3 Upvotes

Hello all!

Currently, I'm looking to buy some Morimoto projectors to do a retrofit on my car (it already has a morimoto H11 HID system installed, but the projectors were never swapped out unfortunately). I'm currently looking to get the Morimoto Mini H1. However, I'm a bit confused on a part that says "optional mounting brackets". To my understanding, some modification is required for this projector to fit in the headlight housing (OEM housing), however there's an option for both RQ Hardware: Universal - Front and Universal - Rear. What is the difference between these two, and do I need them for the installation of this projector in my OEM housing?

Also, is it recommended that I get the h1 or the D2S? Currently the car has a Morimoto HID H11 system installed, so I'm not sure if extra modifications are required to be able to install the D2S system.

I notice in one area it mentions "projector shrouds". What are these specifically, and if the OEM housing has them, can I reuse them for this install? If I cannot reuse them, which ones should I get (if necessary)?

I am very sorry for all the questions, but I'm very new to retrofitting and I want to get this right. Thank you all!


r/Retrofit • • Dec 28 '24

In Progress Yamaha scooter retrofit

Thumbnail
gallery
10 Upvotes

Just sharing my own retro on a Yamaha Aerox 155 2017 scooter. NHK 2.5 Bi Led 90watts LHD projectors. Red devil eyes, no angel eyes. White drl's with sequential signal lights. Removed internal reflectors and placed a bracket to hold it in place. Totally DIY. Still finding angel eyes and shroud that will fit. To no avail. Open for comments and improvements. Ciao


r/Retrofit • • Dec 26 '24

Need Ideas Should I buy used Morimoto H1 minis?

5 Upvotes

Looking to do a retrofit on a 2014 Tundra (large lenses) and have someone offering older H1 minis with shrouds for $75. Not sure what generation, but definitely not the 8.0 and he says he bought them “many years ago”.

Ideally I was looking for 3” lenses for about $150 with shrouds, but do you think this is a good option for a budget retrofit? I was eying some NHKs but teardown videos make them seem low quality.


r/Retrofit • • Apr 25 '15

2005 Scion TC + TSX projector

5 Upvotes

First post of the subreddit! Enjoy everyone :)

This is a retrofit done on my younger sister's 2005 Scion TC. I had been into retrofitting for a few years and decided to take this on because she had mentioned to me about it being hard to see at night.

Materials used were:

-TSX projectors tuned w/TSX-R lenses and painted for passive demon eye

-Iris shrouds

-Morimoto 9006 harness

-Morimoto XSB switchback halo

-5 pin relay(s)

-Duplicolor adhesion promoter

-Duplicolor Metalcast Purple

-Duplicolor Ground Coat

-Fast Bright F5 55W ballast(s)

-Amp>D2S connectors

-Morimoto XB35 5500K D2S bulbs (soon to be replaced with the new XB bulbs)

-Various electrical connections

-JB weld and steelstik

All in all this project took me about 9 hours total. This included wiring for the ballasts, angel eyes, 5-pin relays, opening/resealing of headlights, cutting of reflectors, polishing lenses, mounting of projectors, rotational adjustment and painting (by far the most time consuming.)

The setup of this projector is fairly simple. TSX projectors are low-beam only, which is much simpler than bixenon. That means that this projector must be supplemented with a standalone high beam or you lose that function of the headlight. The "passive demon eye" that I mentioned means that the shield of the projector is painted, this allows for the color to show through the lens and gives them a colored effect when viewed at certain angles.

The switchback angel eyes run white when the car is on and signal amber when the turn stalk is used. At night the white LEDs turn off when the low beam is activated and the amber LEDs act in conjunction with the stock turn signals. This was accomplished via a 5-pin relay.

Enjoy!

Next up is going to be my 2004 Civic SI (ep3). Setup will be Lexus RX350-US BiXenon Projectors + STi-R clear lenses + Black passive demon eye, VLED V3 Triton 5K switchbacks as DRLs and turn signals, Matsushita Gen IV ballasts, Morimoto 9006 relay, and Philips 85122XV-C1 bulbs.

I'll also be updating this post with some output shots and a driving video within the next few days. Stay tuned!


r/Retrofit • • Feb 26 '18

Osram CBB Experience

3 Upvotes

Hello fellow retrofitters,

I am looking for those that have experience with the Osram Cool Blue Boost (CBB) D2S bulbs.

I just purchased them today to replace my aged Morimoto 3five 5000k D2S bulbs, in my RX350 retrofitted Prius from The Retrofit Source and should have it within 2 days.

Is anyone running these bulbs, and if you are, got any output pics?


r/Retrofit • • Feb 24 '18

LED bulbs on mini H1 projectors

2 Upvotes

Hi there, I am willing to replace my HID kit with some LED bulbs... My headlights have mini H1 3.0" projectors retrofitted.

Will I encounter any problems?


r/Retrofit • • Dec 23 '19

RX350 low beam HID projector swap on 2012 Camry

Post image
8 Upvotes

r/Retrofit • • Jan 05 '23

r/Retrofit is public! Here's a few build ideas to get you started - welcome to all current and future members! I look forward to seeing your projects and helping answer any questions.

Thumbnail
gallery
7 Upvotes

r/Retrofit • • Jan 17 '23

Technical/Assembly Question HID UNINSTALLING BACK TO HALOGENS

2 Upvotes

First post so here goes…

I have a 2002 Subaru Forester L, the previous owners put an HID a conversion kit in, and they aren’t put in properly and it’s causing lots of issues, what do I do to get it back to Halogens? There’s no parts that came with it for the halogens and it’s been too long for the owners to still have them. I know the kits are very plug and play but what parts do I need for the halogen circuit?


r/Retrofit • • Jan 06 '23

Completed Build Subaru Impreza retrofit with switchback LED accents

Thumbnail
gallery
6 Upvotes

r/Retrofit • • Jan 06 '23

04 Element

Thumbnail
gallery
8 Upvotes

r/Retrofit • • Mar 04 '24

Technical/Assembly Question Subaru 2016 levorg/wrx etc led projectors

1 Upvotes

I want to do halos around the projectors but reverse mounted. (Hidden between projector shroud and projector lense) to keep OEM look, im not doing to standard blackout inside and I think it'll look funny having white halos sitting ontop of the chrome shroud. My trouble is I don't know what diameter halo to get, I think 70mm is the usual size to go outside of the shroud, im assuming inside would be smaller. Flyride did a quick video of it on YouTube but never went into specifics, just showed the 2 different mounting options. I think all I'd really need is the diameter of the led projector lense but I can't find that info anywhere. Can anyone help out? TIA


r/Retrofit • • Feb 24 '24

Need Ideas What are The absolute brights retrofit assemblies?

4 Upvotes

Im looking for the brightest retrofits available , I saw the ups power bi xenon laser set but at the cost of 500 dollars, do anyone have any suggestions?