r/RetroArch • u/salamander592 • 5h ago
r/RetroArch • u/Ok-Walk-2163 • 1h ago
Technical Support Help with netplay issues
So tried some testing between myself and a friend. Both on windows machines, we have around 20ms when we ping each other in CMD. On RetroArch however, it jumps up to around 32ms on average. Is this expected?
Also sometimes we get spikes of lag that's pretty consistent when we play. I assume perhaps its the software trying to keep the both of us in sync. Is there a way to minimise these spikes of lag, and make the experience better? Any settings I could experiment with? We both have very fast wired connections.
r/RetroArch • u/MacGanna • 6h ago
Technical Support Sega Genesis Plus crashes when loading rom
Here is the log: https://pastebin.com/PB22QrdA
It includes both the retroarch crash log and the reliability monitor information.
Some other information:
- I"m running RetroArch on Windows 10
- If I run the rom on 'Sega Genesis Plus (Wide)' the game runs fine, only issue is outside the 4:3 ratio video box of the game, on the left hand side random pixel blocks appear during in-game mode (ie when I'm playing it)
- I've tried to redownload the 'Sega Genesis Plus' core, used 'Update Installed Cores', it continues to crash, also renamed the 'Sega Genesis Plus' core from .dll to .old, then dowloaded the core again, but it crashes.
- tried several games (Midnight Resistance, Speedball 2, Sonic the Hedgehog 2), they all crash.
- by crash I mean: I will load content, the game then the retroarch logo will appear, and there seems to be a pause and then the application will close.
Please help, thank you
r/RetroArch • u/Aggravating_Air_8698 • 3h ago
Technical Support So it's anybody having trouble with N64 cores just recently?
I wanted to play Zelda Ocarina of Time, and I want retroarch because of the amazing shaders, actually I played the game just like a month before and it worked fine, pretty sure I was using ParaLLEi it's the predetermined I have, the other two when I tried to use it go slow, ParaLLEi works fine, but now it has problems on the texture, sounds a little weird and the worst part, open the menu on the game (the thing you do a lot to select items) takes a lot of time, I press start and the game freeze the image, looks like the game just freeze or it's gonna crash, wait like 5 seconds and then the menu open, It's just unplayable.
It's not even my device nor the shaders (all of this it's without shaders) because the game before worked just fine so idk, if someone it's having a similar problem or something, maybe I need to adjust something with the core but with many options I tried and don't appear to help.
I know I can play the game too with the port people made but I was sad when I see the port doesn't include options to make the game look nicer (not talking about making the game look HD), more CRT N64 like retroarch does
r/RetroArch • u/Timic83 • 3h ago
parallei n64 doesn't load retroachievements with zipped games
mupen and emun64 it works fine, parallei it needs to be unzipped for some reason. is there a fix?
r/RetroArch • u/Capybara-From-Hell • 5h ago
Technical Support [Flycast / macOS] Texture Upscale (xBRZ) option missing in latest Universal build — how to restore or smooth 2D sprites?
Hi everyone,
I’m running the latest Universal build of RetroArch on macOS and noticed that the Texture Upscale (xBRZ) option is missing from the Flycast core options. On my Windows 11 setup, this option is present and working fine.
I have a couple of questions:
Is there a hidden config setting or workaround to enable xBRZ texture upscaling on the macOS build?
If the feature was intentionally removed or deprecated for the macOS/Metal build with Vulkan, is there a safe way to roll back or sideload an older version of the Flycast core that still has it?
For context, I’m trying to smooth out the jagged edges on 2D sprites in Dreamcast and NAOMI games. Normally I use shaders for this, but they aren't smoothing properly at 1x native resolution (they only seem to kick in properly when running at half resolution). Any alternative tips for cleaning up 2D sprite scaling in Flycast on macOS would also be appreciated.
Thanks!
r/RetroArch • u/Worldly_Operation959 • 7h ago
Keyboard input issues with PCEE2 and FBNeo in RetroArch
Hi everyone,
I've been experiencing some frustrating keyboard input issues while playing PS2 and arcade games in RetroArch. I managed to work around one of them by switching cores, but I still don't understand why it happened. The other issue is still unresolved.
I'd appreciate any suggestions or explanations.
1. PCEE2: Fighting game motion inputs don't register correctly
Setup:
Emulator: RetroArch(Win11/amd64)
Core: PCEE2
Games: Japanese versions of The King of Fighters '98 Ultimate Match and The King of Fighters 2002 Unlimited Match
Game mode: Practice mode
Controller: Regular membrane keyboard(wireless+usbreciver)
Keyboard mapping: WASD for directions, numpad 4/5/6/8 for action buttons
Note: The numbers used in the move commands below follow standard fighting game numpad notation (4 = down-back, 2 = down, 6 = forward, etc.), not the physical keys on my keyboard.
When using my Xbox One controller, everything works perfectly. However, when I switch to the keyboard, I run into a strange problem.
I play Clark, whose Argentine Backbreaker command is 41236 + K.
I expect a quick 426 + K input to work. This is how I used to perform the move when I was younger.
However, when I enter 426 + K quickly, the grab doesn't come out. Instead, the game seems to register only K (not even 6 + K).
Interestingly, if I enter the directions slowly, one by one (4 → 2 → 6 → K), the move works. Clark even performs a noticeable backward movement before executing the grab.
But this slow input is obviously impractical for his Super Argentine Backbreaker, which requires:
(63214) × 2 + P
I suspect something is wrong with how directional inputs are being registered or processed, but I have no idea what exactly.
I've tried several suggested fixes:
Enabling Automatic Frame Delay.
Switching the input driver from DInput to Raw.
Changing Polling Behavior from Late to Early or Normal.
Changing Analog-to-Digital Type from Left Analog to None.
Using third-party software to map my keyboard to an Xbox 360 controller.
None of these helped.
Interestingly, quarter-circle motions work completely fine even when input very quickly. For example, Kyo's 236 + P (input as 26 + P) and Iori's 214 + P (input as 24 + P) come out reliably every time.
The issue strictly affects half-circle motions (like 426 + K or 63214 + P) when entered quickly on a keyboard. Because keyboard inputs lack natural diagonal transitions unless keys overlap—and fast A -> S -> D presses can easily cause brief 4 + 6 SOCD (Simultaneous Opposite Cardinal Directions) overlaps—it seems PCEE2 might be dropping the sequence or neutralizing the input mid-motion, whereas LRPS2 handles it cleanly.
Eventually, I switched from PCEE2 to LRPS2, and the problem disappeared completely. The same keyboard and button mappings now work as expected.
Does anyone know why this might happen with PCEE2? Is there a way to fix it without switching cores? Could this be related to how PCEE2 handles keyboard inputs?
2. FBNeo: Inconsistent directional inputs, move follow-ups, and button combinations
I'm also experiencing some keyboard input problems with FBNeo when playing arcade beat 'em ups, particularly:
Knights of Valour (ver. 119)
Cadillacs and Dinosaurs
These problems don't seem to behave exactly the same way in both games.
Directional inputs:
In Knights of Valour, repeated 44 inputs seem noticeably less reliable than 66 inputs. However, 66 doesn't work every time either.
The issue is intermittent, but I can reproduce it roughly 1–2 times in 10 attempts.
Interestingly, the difference between 44 and 66 is much less noticeable in Cadillacs and Dinosaurs.
Character move follow-ups – Zhao Yun in Knights of Valour:
Zhao Yun has a ground move performed with 6 + A, which can be followed up with two additional A presses.
The initial 6 + A move works fine, but getting the two follow-up A hits to register is very difficult.
There is also an aerial version of the move: jump first, then input 8 + A, followed by the same two A follow-ups.
The initial aerial 8 + A move also works, but the follow-ups are just as difficult to perform.
I'm not sure whether these follow-ups require very precise timing (a tight link or timing-based input), or whether my keyboard/input setup is contributing to the problem.
Simultaneous button combinations:
In Knights of Valour:
A + B + Chas never worked for me.A + Bonly works occasionally.Trying to hold one button first and then press the other doesn't help either.
In Cadillacs and Dinosaurs:
Pressing
A + Bsimultaneously doesn't work.However, I can successfully trigger the combination by holding either one of the buttons first and then pressing the other.
This makes me wonder whether the order and timing of key presses affect how combinations are registered, and why the two games behave differently.
Keyboard Ghosting / Matrix Test Results: I tested my keyboard using Microsoft's official keyboard ghosting demo tool, and the results explain part of the FBNeo behavior:
Pressing
A + S + D + Numpad 4 + Numpad 5registers all 5 keys simultaneously.Pressing
A + S + D + Numpad 5 + Numpad 6fails to registerNumpad 6due to membrane matrix ghosting.However, pressing
Numpad 4 + 5 + 6alone (without directional keys) registers all three keys on the web test, yetA + B + Cstill never triggers in Knights of Valour (likely due to the PGM hardware's strict frame-window requirement for simultaneous edges).
What I'm trying to figure out
I have a few questions:
Why would PCEE2 fail to recognize fast keyboard motion inputs when LRPS2 works perfectly with the same setup?
Could the inconsistent
44and66inputs in FBNeo be related to keyboard hardware, key rollover/ghosting, or RetroArch's input handling?Is there a way to improve move follow-ups and simultaneous button combinations in FBNeo?
Are there any useful settings, diagnostic tools, or tests I should try to narrow down the cause?
I'm using a fairly ordinary membrane keyboard, not a mechanical gaming keyboard.
I'm not sure whether these issues share the same underlying cause or whether they are completely unrelated.
Any suggestions would be greatly appreciated. Thanks!
r/RetroArch • u/Either-Bend8508 • 13h ago
Technical Support Importing save data between updates on iOS
Im playing Pokémon Monomyth and I’m trying to update it to the 1.2 update. I know it probably has something to do with the file names but I don’t know how to do that on iOS
r/RetroArch • u/PolicyResponsible744 • 1d ago
Showcase Retroarch running on Switch 2
OOT on Retroarch running on Switch 2 :)
r/RetroArch • u/Intelligent-Sun-1250 • 16h ago
Technical Support: SOLVED No Entries To Display
I'm trying to get into RetroArch again and I'm trying to find the issue, it seems previously the BuildBot Cores URL was previously blank so I changed it to https://buildbot.libretro.com/stable/ to match the BuildBot Assets URL, if I could get it working it'd be greatly appreciated.
r/RetroArch • u/HimitsuUK • 18h ago
Technical Support Mouse / M+KB for games like Silent Scope, Confidential Mission, Soldier of Fortune? (Flycast)
I'm struggling to get mouse or mouse and keyboard to work for these games or similar, in Flycast?
Any input (pun half intended) greatly received! These games are hard work with controller, especially the first two.
r/RetroArch • u/No-Swing-3799 • 19h ago
Discussion Stupid question about cheats
Sorry if that question is dumb.
I think it's not the case but do the cheats when they are applied are modifying the original game rom file ?
Thanks
r/RetroArch • u/Visual-Wash2991 • 1d ago
So I made the ultimate portable PlayStation Classic.
galleryr/RetroArch • u/DaveTheMan1985 • 1d ago
Technical Support Mupen64 iOS Core slow on iPhone 13
Use to work Fine but now it’s Slow and Sluggish
That on GL video plugin with Settings as Default
I am using latest nightly version
How can I make it run normally?
r/RetroArch • u/AEntunus • 1d ago
Technical Support: SOLVED Did I accidentally wipe my FF7 save before swapping the disk?
Hi everybody,
I got to the end of disk 1 and saved then it prompted me to insert disk 2, but I was done for the day, so I just shut down the emulator.
I directly started disk 2 today, but have no save files. Then I tried launching disk 1 again, but that's now completely empty as well...
What I've tried:
renaming Final Fantasy VII (USA) (Disc 1).srm to ...(Disc 2).srm
created a Final Fantasy VII (USA).m3u file, ran the game that way and then copied and renamed Final Fantasy VII (USA) (Disc 1).srm to Final Fantasy VII (USA).srm
tried swapping the disks in the emulator
I'm using the Beetle PSX core.
Have I completely wiped my save files? Any help would be appreciated.
Thanks in advance!
*SOLVED: By hard quitting the emulator on the "Insert disc 2" screen despite saving beforehand, my save file was wiped. You live, you learn.
r/RetroArch • u/peeker004 • 1d ago
Need help with Ocarina of Time(Retro Arch- Muphen plus)
reddit.comr/RetroArch • u/Adolfs_gas_station • 2d ago
Nds screen
i want a way to make the bottom right screen to appear in top right corner i have tried all core screen options but didn't find any solution.please help me guys and i am using retroarch in android with touch control with landscape mode.
r/RetroArch • u/wolf_wizard_official • 1d ago
These shaders just won't show up
I'm trying to use the Retro Crisis GDV-NTSC N64 shader. I did all the installation stuff right, but when I go to load the shader, the actual shader files don't show up. The folders are there, but the shaders themselves are nonexistent. Can anyone help?
r/RetroArch • u/TheBookGem • 2d ago
Technical Support Does anyone know which cores work best for the N64 Majoras Mask new DFC glitch?
The recently discovered DFC glitch (Damage Flag Corruption) that works on OOT and MM is supposed to be a game changer. I have seen people all over the internet saying it is supposed to super easy to do, but I have tried following every single instruction to a tee on my two cores on RetroArch (Muppen64Plus-Next, and ParaLLEI N64) and none of the supposed DFC setups work at all. I don't know if it is because I play on emulators or not and others play on console releases, but I have done everything from using save states to try every single possible combination of the setups, using frame perfect executions, and even used buffering and slowmo hotkeys to get better frame perfect executions. I don't know if it might be because of the cores I am playing, switching away from either of them is about the only thing I can think of that I haven't tried yet, or playing on a different emulator then RetroArch, or somehow changing other settings in RetroArch that might affect things. Anyone have any tips about other cores, emulators, or settings I should look at to make this work out?
r/RetroArch • u/cprice12 • 3d ago
Frustrating issue with mapping buttons on arcade cab in Retrobat
I had this all set up just fine when I used GameEX. But I recently got a new PC for my cab and decided to redo everything because GameEX was a little buggy for me with certain things and I wanted to try something different, so I went with Retrobat.
But the cab buttons are giving me a migraine. I've been tinkering with this, researching this for weeks now and I can't figure it out.
I have 2 joysticks on the cab. Each with 6 buttons for gameplay, a Start button, a Select/Coin button, a single pause button, and volume up and down buttons. I have a usb I-Pac2 board that is wired correctly with the default settings. All of the buttons and joystick directions work fine. But the 6 buttons do not work as mapped.
(the two gamepads I mapped seem to work fine for console emulation)
I fire up MAME Mortal Kombat and no buttons will kick. They only punch and block. And it seems like 4 of the buttons punch and two of them block.
I tried setting the MAME controller profile to I-Pac2 controller option in Retrobat. That didn't work.
I tried mapping the buttons in Retrobat. That didn't work.
I've been in and out of all kinds of settings and nothing seems to properly map all 6 of the buttons for MAME roms.
I'm sure it's something stupid I'm missing.
Any suggestions?
r/RetroArch • u/JayBensonFong • 2d ago
Technical Support I have just updated to iOS 27.2 and my backbone controller no longer works with retroarch. Is this a known issue? I am holding out for an app update at this point...
Clarification: this is for iOS on the app store, my phone is not jailbroken so just whatever the latest version available is.
Also if this is not the correct sub for this question, please message me the correct one prior to removing my post. Thanks ☺️