r/RacketStringers • u/b_Rabbit94 • 5d ago
ATW Stringing
Hi team,
I have a Klippermate stringing machine. Can I do the ATW stringing method without a starting clamp or do I need one? Have all the basic clamps etc
Stringing an Oliver Apex 420.
Cheers
1
u/pug_fugly_moe 5d ago
I don’t see how it can be done without a starting clamp or at least a third floating clamp acting as a starting g clamp. Do you wanna do ATW just for kicks?
1
u/b_Rabbit94 5d ago
Sweet as might have to purchase one. No i have to do it for this frame, well that is what I have determined through research. Mains end at the bottom, which would mean that the crosses would have to start from the bottom (one piece method). I am self taught and learning myself, any tips, tricks or advice would be greatly appreciated 🙏🏻
1
u/socially_ambiguous 5d ago
Why can’t you do a two piece?
1
u/b_Rabbit94 5d ago
Unsure, I guess I could do. Tie both mains off bottom and then start crosses from top. Still would wareant a starting clamp wouldn't it?
1
u/socially_ambiguous 5d ago
I think ideally you’d use a starting clamp to start the crosses but you could just tie off the cross to the main and start pulling. Not the best way to do it but if you don’t want to get a starting clamp I think that’s the only way
1
u/b_Rabbit94 5d ago
Yeah mate, only thing would be potential for a double knot on one of the tie grommets down bottom wouldn't there? Being that both mains finish at throat?
1
u/socially_ambiguous 5d ago
I'm not an expert and have only strung a few racquets myself so far but from the 2 piece strings I've done, generally the bottom cross ends up tying off to another bottom cross. I haven't come across a racquet where the bottom cross got strung to a main, especially a main with a tie off knot as well, but I'm sure it could happen?
1
u/b_Rabbit94 5d ago
Yeah depends on the tie off grommets. Some rackets do have more options for tie off points.
2
u/javawong 5d ago
Just buy the starting clamp. It's an essential tool for stringing.
ATW can be done without it.