r/PrusaMINI • u/Opening_Question8855 • Dec 18 '25
Fast print on my Mini+ but getting some vibration artifacts
Printing faster on my Mini+, but seeing vibration artifacts.
Forgot to install damping pads during assembly — would that cause this?
r/PrusaMINI • u/Opening_Question8855 • Dec 18 '25
Printing faster on my Mini+, but seeing vibration artifacts.
Forgot to install damping pads during assembly — would that cause this?
r/PrusaMINI • u/ElBarbas • Dec 10 '23
r/PrusaMINI • u/Pitiful-Sector7975 • Mar 23 '24
Should i clean the hotend or is this fine
r/PrusaMINI • u/raymate • Oct 31 '22
It’s been almost a full year with no firmware updates. When I got my mini plus when it was first released we had firmware updates fairly frequently. But now nothing.
I was hoping the Prusa Connect was going to be expanded on and actually get to work.
Now wished back then I paid the extra to get the larger brother that seems to be a better supported product
r/PrusaMINI • u/SaintSecular • Jul 27 '22
I recently purchased the bondtech dual gear extruder and the ifs kit upgrade. The problem
i am having is lack of instructions,I was told hy thr seller that there is only gideo instructions on Youtube and I have watched those but the video quality is to low to see important details and lacks information like.screw sizeetc.. Does anyone. know of detailed instructtions for kit assemblies? Thank you.r/PrusaMINI • u/Zatnaktel • Jan 07 '26
This is the first time I see that. Printer is relatively new and bed temperature is set for pla at 60°C. Bed (classic type) was cleaned 2 prints ago with isopropyle alcohol.
Thanks for suggestions.
r/PrusaMINI • u/Early_Ad3437 • Jun 29 '25
Will have opportunity in the next few days to see and possibly buy a used Mini+. Guys says it has 32 bit Buddy board with upgrades Bondtech extruder and MicroSwiss hotend.
Of course will want to see it run a print. Anything else I should check or be aware of? Hopeful this is what its advertised as. Would love to have this machine dedicated to precision small parts.
Thanks
r/PrusaMINI • u/hz-41 • Jan 17 '23
r/PrusaMINI • u/shirakashi • Feb 28 '23
I've cleaned and switched the nozzle (0.4), printed pla and petg. I cleaned the extruder housing, the gears, the thing that grabbed the filament. I did several cold pulls. But nothing changed. Once the printer starts printing faster (default prusa settings for PLA and PETG) the extruder clicks and not enough filament lands on the print.
r/PrusaMINI • u/fatbong2000 • Aug 10 '22
r/PrusaMINI • u/hz-41 • Feb 18 '23
What could’ve caused this, my printer started smoking and then beeping, what happened
r/PrusaMINI • u/[deleted] • Jul 16 '24
To the Prusa community, I’m a proud owner of a Mini+ and Original Mini. I have upgraded the Mini with a Super PINDA so I guess it’s a Mini+ now. With Amazon Prime Days amongst us, I’m wondering if there are hot end upgrades and or extruders that you can recommend. I’m looking at a Bondtech IFS extruder and V6 hot end. Any thoughts on E3D? Looking for your recommendations. Thanks.
r/PrusaMINI • u/[deleted] • Jan 17 '24
I’ve had The Prusa Mini+ for a year and half and I was curious what this port was. I assume it’s for Ethernet, but I could be wrong.
r/PrusaMINI • u/NoTouchyCompany • Dec 04 '23
r/PrusaMINI • u/[deleted] • Aug 17 '24
For a different project of mine. Thanks
r/PrusaMINI • u/I_lack_common_sense • Jul 14 '25
r/PrusaMINI • u/Bbelt13 • Jul 19 '23
I’ve noticed my prints have started to leak marks where the first layer was and it shows up on other prints. Is my first layer too close?
r/PrusaMINI • u/Thiqqyniqqy72 • Oct 22 '23
Hey everybody. Just joined. Been having problems on my prusa mini. First layer goes down pretty good and the rest of the print gets to be pretty bad looking. There’s some gaps, baby layer shifts (like by one layer), and when I go to take the prints off the bed they just crumple in my hands. I believe it to be under extension. Nothing with the hotend, fully clean, Bowden tube is good, couplings are good, nozzle replaced. Has to be extruder. (Bed is also not to close to nozzle) All help is appreciated. Happy printing!!!
r/PrusaMINI • u/smartepic • Jun 03 '22