r/Pottery • • 1h ago

Question! Total beginner - what went wrong?

Thumbnail
gallery
0 Upvotes

Well, longtime lurker first time poster.

I am at the total beginning of clay working and have no idea what went wrong... well I tried to make a little ethanol burning oven with dry clay. My first time using it! Well it cracked all over the place! I had instructions from an online plattform with a lot of followers. Might be AI retrospective.

Anyways, can anyone explain to me what could have gone wrong? Any help is welcome as I planned this to be a little christmas present for my husband.


r/Pottery • • 6h ago

Teapots Glaze firing pots with lids

2 Upvotes

I’m taking a ceramics class and I notice a number of people are glaze firing vessels with lids in place rather than separating them. A good number end with the lid stuck. Is it not better to set them up individually in the kiln?


r/Pottery • • 6h ago

Question! Thoughts on people asking to buy imperfect work for cheaper?

10 Upvotes

I have had several people ask to buy mugs I've made that have flaws like a chipped foot or a shallow crack where the handle connects. They function fine (like I'd use them myself with no worries) but I was not intending to sell anything that didn't turn out perfect. However these people have been clear that they can't afford full price.

I've been offered half price and a trade so far which I accepted because they really wanted to support me, but I honestly don't even like selling messed up stuff. I was super clear about it not being my best but they seemed happy. I don't know how to feel about it because I'd rather present my best work only but then I wouldn't be willing to compromise on price so much.

Has anyone else had this issue? Am I overthinking? I would just give them away honestly but they seemed so excited to give me something for it. Plus they've started to spread the word to other people we know that I'll sell them at a discount :/


r/Pottery • • 7h ago

Question! How to glaze like this?

Post image
2 Upvotes

Chawan by fkapottery on IG

Does anyone know how to glaze like this? I’m assuming you just paint a buncha different strokes of different colors but unsure. Which glaze colors do you think these are?


r/Pottery • • 8h ago

Artistic Praying to the kiln gods 🙏

Thumbnail
gallery
28 Upvotes

Really hoping the underglaze pops after firing! I sketched my pup based off of my favorite picture of him onto the platter with a pencil before going over it with a couple layers of watered down underglaze. I’ve tried a few other projects like this and hopefully learned enough from my previous mistakes that this one will turn out okay 🤞
Either way, I think he’s okay with being my muse.


r/Pottery • • 8h ago

Kiln Stuff Finally rebuilt my soda kiln 7 months after moving

Post image
6 Upvotes

Took advantage of the nice midwest weather to fire twice this week.


r/Pottery • • 8h ago

Question! Ceramic buttons

Thumbnail
gallery
450 Upvotes

Hiii❤️ can someone help me on how to make this type of buttons? im new to pottery and i would really love to add this kind of buttons to my knitted cardigan. i love the tecnique they used to create the beautiful color of the buttons i need to know how!!! tysm in advance


r/Pottery • • 8h ago

Accessible Pottery Snail pot

Thumbnail
gallery
15 Upvotes

First time I tried hand painting with underglaze. I'm super happy with how it turned out. I was blessed by the fickle glaze goddess


r/Pottery • • 9h ago

Glazing Techniques coyote forest satin glaze

Thumbnail
gallery
23 Upvotes

honestly only sharing this because it’s hard to find pics of this glaze! fired to cone 6 on my studios reclaim :)


r/Pottery • • 11h ago

Wheel throwing Related Finally throwing okay enough to make mugs with dimpled holds.

Post image
20 Upvotes

Finally throwing decently enough to nake these! I made them so bulky before that I had to trim then a lot everytime, all over.

Feels like a small achievement :D


r/Pottery • • 11h ago

Question! What happened here?

Post image
4 Upvotes

I made about 20 of these ornaments. Luckily only fired a handful. At cone 5 and a medium slow cool.

I applied underglaze and wiped back on the bisqued work. On the left I applied two coats of rainforest. The right has two coats of snow. The other one has obsidian and it’s totally blacked out (ha woops.)

I’d be happy with rainforest but it didn’t fill in those teeny tiny dots in the texture.

My second question is about the other bisqued and glazed pieces. I plan to wipe off all the glaze and just apply clear. Wondering how that’ll turn out…


r/Pottery • • 11h ago

Question! Flameware clays to buy in the UK

3 Upvotes

Hi everyone, does anyone know where I can buy flameware clay in the UK? I’m hoping to make cooking pots and teapots that can be used directly over an open flame, but I’ve struggled to find a UK supplier. Any recommendations would be greatly appreciated! Thanks!


r/Pottery • • 12h ago

Mugs & Cups Attempt 2 at the cat!!

Post image
99 Upvotes

I really appreciate the kind critique and feedback I got from this sub the other day! It’s still far from perfect but I’m hopeful it looks a little bit more like my loyal customers deceased cat! My first real commission and it was a doozy! I hadn’t anticipated how difficult multi colored short fur could be to paint.


r/Pottery • • 12h ago

Mugs & Cups 顾客定制的粉彩

14 Upvotes

r/Pottery • • 12h ago

Other Types Made these two today, less water. 2.6 lbs each weigh about 1-2 lbs after throwing

Thumbnail
gallery
0 Upvotes

Larger walls measure just under 1 cm thick smaller just under half a cm thick


r/Pottery • • 13h ago

Help! My dirty little secret

89 Upvotes

I’ve been potting for about 14 years. People like my work, and I’ve sold quite a few pieces over the years. I feel good about my designs and my glazing. But I have a dirty little secret: I’m a lousy potter! Specifically, after all these years I’m still struggling mightily with centering. I try hard to have well-wedged balls of clay and put them down right in the center of the wheel—but it’s never perfect. When I cone up and down, it’s always irregular at the bottom. When I open, there’s always one side that’s thicker than the other. Every potter knows how that results in a cascade of problems. I spend a lot of time and energy correcting the mistakes, shaving off one side, etc., and I do a whole lot of trimming afterwards, hopefully ending up with something that looks okay (but is far from perfect). I took lots of beginner classes when I started out, and a few refreshers since then, but the teachers don’t have all that much to say about my problem, they are more interested in different subjects. I think I’m aware of much of the usual advice: brace my arm on the tray, cut away excess at the bottom, use two metal ribs, etc. But then I watch the pros on videos, and their initial centering and opening is always perfect and takes only a moment. I can’t claim I haven’t had enough practice—I’ve made thousands of pots. Do I just lack the talent? Any advice?


r/Pottery • • 14h ago

Question! Pottery tools

1 Upvotes

What recommendations do y’all have for pottery tools or just tools in general that you feel like make throwing a little easier for you? I’ve only been throwing for a year but really want to start getting serious and find some tools that will help with centering as well. Still really struggling with that, especially when trimming. Also just curious what the best tool brands are to look for. Thanks in advance. 😊


r/Pottery • • 14h ago

Artistic WIP— of japanese incense holder

Post image
6 Upvotes

r/Pottery • • 15h ago

Question! Need help gathering info

Thumbnail
gallery
0 Upvotes

Hello!
My boyfriend's lovely mother just sent this pics to my boyfriend and I. It is of an old kiln that has been sitting in her friend's dilapidated shed for the past 20 years, apparently she stopped doing pottery after her move many years ago. They have kindly offered to gift it to us, but they said it needs some work. Does anyone have any info? Such as what type it is, what work may need to be done, how/where to keep it, and if this is worth it? For context, my boyfriend and I are recent art school graduates that no longer have access to a kiln, so if this works it would be a dream come true.
Thank you!!!!!


r/Pottery • • 15h ago

Artistic Progress on New Piece

Thumbnail
gallery
18 Upvotes

I’ve been taking a hand building class to change things up and thought I would make a planter, maybe for a friend, and had the idea that the water would drain out through the legs of the pot above. So when I started making the legs out of clay tubes and then attaching them to the pot, I thought they kind of looked like fish tails, so I figured I’d play on that theme and went with whales.

I then figured I’d make the whale mouths open so the water could pool inside and act like any planter’s saucer would.

I’m excited to see how this goes and I’m already researching how I might even glaze this because the clay is dark and every time I glaze dark clay the colors get lost in it.

I also learned that whale sharks are not whales and that the orca (not pictures) is actually closer to the dolphin. 😅Either way, all the greats are represented here. 🤣


r/Pottery • • 15h ago

Question! When using underglaze, do I need to clear coat it or is it ok as is?

Thumbnail
gallery
104 Upvotes

r/Pottery • • 15h ago

Question! college courses vs. studio sessions

5 Upvotes

Hi! I have about 4 months of self taught pottery on the wheel experience and am trying to figure out what the next step should be. I am trying to decide between doing a 6 week course at a local studio vs. being a course auditor at my local university. For those who have experience doing both, what do you recommend? Thanks!


r/Pottery • • 16h ago

Question! Does anyone have a glaze recipe similar to Cosmic Tea Dust by Amaco?

1 Upvotes

I just learned that it’s being discontinued today, and unfortunately everywhere I’m looking is sold out of it. Has anyone ever formulated a glaze that has a similar look to it?


r/Pottery • • 16h ago

Artistic What are the odds this dries without anything falling off

10 Upvotes

Working on a new sculpture that I hope will end up as a trophy. Finished the bridle off and quite pleased with it and now realising there are so many pieces that might crack off drying or in bisque.

So, here it is before potential ruin!

Also no idea whether to try and glaze realistically or to go with a nice breaking glaze and lean into the stylised form.