r/PikaOS • • 12h ago

This rice i am making on pikaos with the niri window manager is so good i could die

Thumbnail
reddit.com
10 Upvotes

r/PikaOS • • 12h ago

My Own Shell for KDE Plasma

Post image
3 Upvotes

r/PikaOS • • 2d ago

Help/Question Installation Wizard help

6 Upvotes

Hi all!

I installed PikaOS two days ago and it's been mostly smooth sailing. However, I have had a problem where the setup wizard runs every time I start up the computer.

I suspect the problem was caused because I set up my user from the settings page and not through the wizard, but it is becoming annoying. Each time, it gets to the user creation step and then closes after I press Next.

I have gone through the wiki and haven't had any luck there. Any advice or suggestions would be welcome, thanks!


r/PikaOS • • 2d ago

New to PikOS

24 Upvotes

My patience has waned with PopOS waiting for 26.04. I need more recent versions of the tools I use. Yesterday I installed PikOS on my dell laptop. So far everything looks really nice.


r/PikaOS • • 3d ago

Mattscreative

Thumbnail
youtu.be
19 Upvotes

r/PikaOS • • 3d ago

Help/Question Why Deb Multimedia?

13 Upvotes

So the PikaOS website says this:

Base: Debian Sid + Deb Multimedia

(Curated, patched and compiled together)

Okay but I thought it is well known that the Deb Multimedia repository is mostly obsolete in recent years and they were more useful back when Debian themselves were much more strict about patented stuff etc?

Does even today in 2026 the Deb Multimedia repo bring better support for audio/visual as compared to the same packages pulled from default Debian?


r/PikaOS • • 4d ago

there's a new PikaOS full ISO 26.11.17-34 for testing

51 Upvotes

3 Desktop Environments, 4 Window Managers, and 3 Desktop Shells in one ISO, Ventoy compatible.

(This ISO is for Testing, not a official stable release, for a stable ISO, go to the official website, https://pika-os.com/#editions)

https://iso.pika-os.com/PikaOS-Nest-Full-4.0-amd64-v3-26.11.17-34.iso

The latest Full ISO (November 17, 2026) brings together an impressive collection of desktop options:

3 Desktop Environments:

- KDE Plasma

- GNOME

- COSMIC

4 Window Managers / Compositors:

- Niri

- Hyprland

- MangoWM

- Zoolander (15 built-in window layouts)

3 Desktop Shells:

- Noctalia

- Dank Material Shell (DMS)

- Otter Shell

That's 10 desktop components in this single Linux distribution iso.


r/PikaOS • • 5d ago

Mattscreative

Thumbnail
youtu.be
62 Upvotes

r/PikaOS • • 6d ago

Appreciation From Feature Request to Reality in Just 2 Days — Amazing PikaOS Development!

35 Upvotes

On November 13, I submitted a feature request on the PikaOS Discord server, suggesting that Otter Bar support left and right vertical panel positions, with automatic widget layout adjustments.

Core developer Ferreo replied, "Sure I'll take a look this weekend."

And just two days later, the feature was already implemented!

Otter Bar now supports all four positions — Top, Bottom, Left, and Right — and changes take effect instantly without restarting the desktop session.

The new vertical panel looks much better on my 3440×1440 ultrawide monitor. While there's still room for some layout refinements, I'm already very happy with the result.

This is what I love about open-source development: users can suggest improvements, developers listen, and great ideas can become reality incredibly quickly.

Huge thanks to Ferreo for being so responsive and making this happen over a single weekend!

From suggestion to implementation in 48 hours. That's impressive!


r/PikaOS • • 6d ago

Appreciation Very impressive Zoolander update to 0.1.49

13 Upvotes

I updated Zoolander to 0.1.49, and the improvements on my Dell G16 (i7-12700H, Intel Iris Xe + RTX 3050 Ti) are impressive.

Previously, Zoolander had serious overheating issues on my laptop, with CPU temperatures occasionally reaching 98°C. I had to force NVIDIA Vulkan rendering to bring temperatures down to around 60–65°C under heavy live streaming tests.

After today's update, everything has changed:

  • Login/logout issues are resolved. Zoolander now starts normally, logs out cleanly to SDDM, and allows repeated logins without black screens or crashes.

  • Massive improvement in power efficiency. Zoolander now uses Intel Iris Xe Vulkan rendering by default, yet CPU temperatures remain around 51–58°C during normal testing.

  • Excellent performance under heavy load. I opened 10 Firefox live-streaming tabs simultaneously. CPU package power averaged around 15W, and the fans stayed relatively quiet.

  • Comparable to KDE Plasma. Power consumption and temperatures on latest PikaOS are now very close to what I experience with KDE Plasma on Kubuntu and Debian.

  • No need to force NVIDIA rendering anymore! Intel Vulkan is now performing just as well thermally as my previous NVIDIA Vulkan workaround.

This is a huge improvement over the previous version. Zoolander + Otter Shell finally feels much more polished and suitable for daily use on my hardware.

Really appreciate the work Ferreo had put into these updates. Great job, and thank you!

One more piece of good news: my previously configured Zoolander (NVIDIA Vulkan) session also still works perfectly after the update!

So now both the standard Zoolander session using Intel Iris Xe Vulkan and my custom NVIDIA Vulkan session can launch successfully.

The biggest improvement is that I no longer need to force NVIDIA rendering to avoid excessive CPU temperatures. The default Intel Vulkan session now delivers similarly good thermal performance.

It's great to have both options working properly. Really impressive progress!


r/PikaOS • • 6d ago

Appreciation Just installed PikaOS

25 Upvotes

I was debating between Pika and Cachy and decided to give Pika a try. I love the bird theme and I like the fact that it uses .deb because it's so common. I don't have a lot of experience with Debian or Ubuntu. I've heard good things about reliability despite being rolling and bleeding edge. Ironically my NixOS just install went completely fubar on me lol.


r/PikaOS • • 6d ago

What does the future hold for PikaOS?

27 Upvotes

I mean, the development team is pretty small and does depend on cachyOS to some extent. What do you guys think?


r/PikaOS • • 8d ago

How I Reduced CPU Temperatures from 98°C to 63°C in PikaOS Zoolander by Switching Vulkan Rendering to NVIDIA

25 Upvotes

I've been experimenting with Zoolander + Otter Shell on PikaOS, running on my Dell G16 laptop (Intel i7-12700H, Intel Iris Xe, NVIDIA RTX 3050 Ti).

I noticed that Zoolander ran noticeably hotter than Niri and KDE Plasma under similar workloads.

With just three Firefox live-streaming tabs open, my CPU temperature reached 98°C.

After some troubleshooting, I found a solution that worked surprisingly well.

1. The problem: Zoolander was using Intel Vulkan

Running:

zoolanderctl status

Showed:

renderer="vulkan on Intel(R) Iris(R) Xe Graphics"

My laptop has two GPUs, but Zoolander was using the Intel iGPU for Vulkan rendering.

I also discovered that my internal display was running at 165Hz and my external monitor at only 60Hz.

I adjusted them to:

  • Internal: 2560×1600 @ 60Hz

  • External: 3440×1440 @ 100Hz

2. NVIDIA PRIME variables weren't enough

I initially tried:

export __NV_PRIME_RENDER_OFFLOAD=1
export __VK_LAYER_NV_optimus=NVIDIA_only
export VK_LOADER_DRIVERS_SELECT='*nvidia*'

Unfortunately, Zoolander continued using Intel Vulkan.

Then I discovered something useful:

zoolander --drm-list

Output:

/dev/dri/card1 driver=i915
connected=1 internal_panel=true

/dev/dri/card2 driver=nvidia
connected=1 internal_panel=false

Zoolander supports explicit DRM device selection!

3. The solution

I created a separate NVIDIA session using this startup script:

#!/bin/sh

export __NV_PRIME_RENDER_OFFLOAD=1
export __VK_LAYER_NV_optimus=NVIDIA_only
export VK_LOADER_DRIVERS_SELECT='*nvidia*'

exec /usr/bin/zoolander-session \
    --drm=/dev/dri/card2 \
    --drm=/dev/dri/card1 \
    "$@"

After logging into the new session:

renderer="vulkan on NVIDIA GeForce RTX 3050 Ti Laptop GPU (NVIDIA 620.70.06, /dev/dri/card2)"

Success!

Both monitors continued working correctly.

4. The results

With the same three Firefox live-streaming tabs open:

MeasurementBeforeAfter
Vulkan rendererIntel Iris XeNVIDIA RTX 3050 Ti
CPU temperatureUp to 98°C56–63°C
Idle CPU temperature53–54°C50–51°C
Idle CPU package power~9.6W~7.5W

During the NVIDIA Vulkan test:

  • CPU package power: ~20.3W average

  • NVIDIA GPU temperature: ~52°C

  • NVIDIA GPU power: ~12W

  • NVIDIA GPU utilization: 23%

The CPU no longer approached 100°C under the tested workload.

Important caveat: This wasn't a perfectly controlled A/B test. I also adjusted the display refresh rates and power profile during troubleshooting, so I can't attribute the entire temperature improvement to NVIDIA Vulkan alone.

5. Takeaway

If you're using Zoolander on an Intel/NVIDIA hybrid laptop, check:

zoolanderctl status
zoolander --drm-list

For my particular hardware, explicitly specifying the DRM device order:

--drm=/dev/dri/card2 --drm=/dev/dri/card1

successfully switched the primary Vulkan renderer to NVIDIA while keeping both displays working.

Note: DRM device numbering and display wiring vary between machines, so don't blindly copy these paths.

I'm quite happy with the results so far.

Has anyone else experimented with NVIDIA Vulkan rendering in Zoolander or other Wayland compositors? I'd be interested to hear your experiences.Title: How I Reduced CPU Temperatures from 98°C to 63°C in Zoolander by Switching Vulkan Rendering to NVIDIAI've been experimenting with Zoolander + Otter Shell on PikaOS, running on my Dell G16 laptop (Intel i7-12700H, Intel Iris Xe, NVIDIA RTX 3050 Ti).I noticed that Zoolander ran noticeably hotter than Niri and KDE Plasma under similar workloads.With just three Firefox live-streaming tabs open, my CPU temperature reached 98°C.After some troubleshooting, I found a solution that worked surprisingly well.1. The problem: Zoolander was using Intel VulkanRunning:zoolanderctl statusShowed:renderer="vulkan on Intel(R) Iris(R) Xe Graphics"My laptop has two GPUs, but Zoolander was using the Intel iGPU for Vulkan rendering.I also discovered that my internal display was running at 165Hz and my external monitor at only 60Hz.I adjusted them to:Internal: 2560×1600 @ 60Hz

External: 3440×1440 @ 100Hz2. NVIDIA PRIME variables weren't enoughI initially tried:export __NV_PRIME_RENDER_OFFLOAD=1
export __VK_LAYER_NV_optimus=NVIDIA_only
export VK_LOADER_DRIVERS_SELECT='*nvidia*'Unfortunately, Zoolander continued using Intel Vulkan.Then I discovered something useful:zoolander --drm-listOutput:/dev/dri/card1 driver=i915
connected=1 internal_panel=true

/dev/dri/card2 driver=nvidia
connected=1 internal_panel=falseZoolander supports explicit DRM device selection!3. The solutionI created a separate NVIDIA session using this startup script:#!/bin/sh

export __NV_PRIME_RENDER_OFFLOAD=1
export __VK_LAYER_NV_optimus=NVIDIA_only
export VK_LOADER_DRIVERS_SELECT='*nvidia*'

exec /usr/bin/zoolander-session \
--drm=/dev/dri/card2 \
--drm=/dev/dri/card1 \
"$@"After logging into the new session:renderer="vulkan on NVIDIA GeForce RTX 3050 Ti Laptop GPU (NVIDIA 620.70.06, /dev/dri/card2)"Success!Both monitors continued working correctly.4. The resultsWith the same three Firefox live-streaming tabs open:Measurement Before After
Vulkan renderer Intel Iris Xe NVIDIA RTX 3050 Ti
CPU temperature Up to 98°C 56–63°C
Idle CPU temperature 53–54°C 50–51°C
Idle CPU package power ~9.6W ~7.5WDuring the NVIDIA Vulkan test:CPU package power: ~20.3W average

NVIDIA GPU temperature: ~52°C

NVIDIA GPU power: ~12W

NVIDIA GPU utilization: 23%The CPU no longer approached 100°C under the tested workload.Important caveat: This wasn't a perfectly controlled A/B test. I also adjusted the display refresh rates and power profile during troubleshooting, so I can't attribute the entire temperature improvement to NVIDIA Vulkan alone.5. TakeawayIf you're using Zoolander on an Intel/NVIDIA hybrid laptop, check:zoolanderctl status
zoolander --drm-listFor my particular hardware, explicitly specifying the DRM device order:--drm=/dev/dri/card2 --drm=/dev/dri/card1successfully switched the primary Vulkan renderer to NVIDIA while keeping both displays working.Note: DRM device numbering and display wiring vary between machines, so don't blindly copy these paths.I'm quite happy with the results so far.Has anyone else experimented with NVIDIA Vulkan rendering in Zoolander or other Wayland compositors? I'd be interested to hear your experiences.


r/PikaOS • • 7d ago

Asus ROG Strix G18 stuck

1 Upvotes

I've used many distros in the past without issue. Playing with PikaOS I would get random lockups. Made it trough the installer and update process. Now I freeze on 'authenticating' after entering password. Ctrl alt f3 gives me a blank screen and not a terminal. Any suggestions?


r/PikaOS • • 8d ago

Why so many fonts installed as a default on Pika KDE?

13 Upvotes

I have been running PikaOS KDE as a daily driver for 9 months now and am very happy with it.

I recently started editing videos with Kdenlive and noticed the system ships almost 3,000 fonts. Unworkable when you search for a font in a dropdown menu. The bulk of them are Thai and Indic scripts that I would never use. Purging these fonts I don't need freed 681 MB.

Right now all of these fonts are hard dependencies of pika-baseos, pika-baseos-desktop, and pika-kde-desktop, so they can't be removed without removing the meta-packages themselves. Would it not be better to offer an install-time option to skip non-Latin font collections, or to make them Recommends instead of Depends? I understand they're currently a standard part of the desktop image, and I get the "works out of the box" intent, but wouldn't a selective option make PikaOS better for most?


r/PikaOS • • 11d ago

installed PikaOS finally

Post image
66 Upvotes

I've been distrohopping for months, tried Debian testing, Ubuntu, Fedora, CachyOS, Kali Linux, opensuse tumbleweed, etc, and lots of different desktop environments, window managers, default kernels, Xanmod kernels, CachyOS kernel, self compiled kernels. Guess I will settle on PikaOS and Kubuntu, since I am more familiar with Debian command lines, and my stockbrokers only support Ubuntu.


r/PikaOS • • 10d ago

Help/Question Gtx1050TI does it work on Pika?

5 Upvotes

I have a lot issues with my GPU being outdated.

Ive decided on many distros and I eventually decided with Pika.

Its for my old laptop with an i5 7th gen and grx1050ti w/ 8gb of RAM. Yeah I know so outdated :(


r/PikaOS • • 12d ago

Help/Question Why did you choose PikaOS instead of CatchyOS?

Thumbnail
gallery
74 Upvotes

r/PikaOS • • 12d ago

Why pikaos has XFS as default filesystem?

15 Upvotes

r/PikaOS • • 12d ago

Is there a way to conveniently update apps that dont automatically update through apt?

Thumbnail reddit.com
2 Upvotes

r/PikaOS • • 13d ago

Desktop Rice Theme came together nicely

63 Upvotes

r/PikaOS • • 15d ago

How to add Github repo to update apps?

Thumbnail reddit.com
3 Upvotes

r/PikaOS • • 16d ago

Appreciation Hello PikaOS, Goodbye Nobara

Post image
119 Upvotes

The display brightness slider with Nobara wasn't working properly which is why I switched to PikaOS. And now voila everything is working perfectly.


r/PikaOS • • 19d ago

Battery drain too high

4 Upvotes

Thought I would give PikaOS a drive and I although I loved the distro for ease of setup , speed and reliability, the battery drain on my AMD Ryzen AI5 became far too aggressive and I had to go back to a stable Debian build. If the custom tuning of the kernel did not affect the battery life too much, would have stayed with it.. may revisit later