r/PcBuildHelp • • 10h ago

Build Question Help with cpu termal paste

Post image

So im first time building a pc and when i applied termalpaste for aio on cpu some of it just a little went into cpu itself the termalpaste used was artic mx7 im worried will the cpu be fine

3 Upvotes

12 comments sorted by

2

u/r_lind3r Moderator 10h ago

It's fine because the paste isn't electrically conductive plus everything exposed is coated in a protective layer that is meant to safeguard against spillage of conductive compounds, so even if you spilled a conductive paste on it a little, it shouldn't actually do anything as the compounds around the IHS are insulated

1

u/Single-Werewolf2527 10h ago

are u sure its b650 lightning motherboard and i just dont want to screw up or fry cpu or smth

2

u/r_lind3r Moderator 10h ago

MX-7 isn't a conductive paste, it's not going to do anything even if you got a tiny bit of it in the socket.

Plus if anything's going to fry the CPU, it's the ASRock motherboard if you bought a 9000X3D series CPU (9800X3D, 9900X3D, etc.) because most of the time when those CPUs fail, an ASRock motherboard is involved and there's often visible discoloration on the CPU pads.

1

u/Single-Werewolf2527 10h ago

its ryzen 7 9700x

1

u/r_lind3r Moderator 10h ago

Then it's fine

1

u/Single-Werewolf2527 9h ago

Thank you man really helped!

1

u/dead_website 10h ago

yeah the IHS is bonded to the PCB (it is PCB right?)

(it's substrate)

0

u/DamnitBobby_Again 9h ago

that's not the IHS, that's the socket with paste on the actual pins

1

u/r_lind3r Moderator 9h ago

The exposed areas around the IHS is not the socket, it's the CPU substrate... The socket is covered when the CPU is installed.

1

u/PrinceVincOnYT 10h ago

a drop in the middle, rest the pressure does by screwing incrementally, magic!

1

u/Single-Werewolf2527 10h ago

too late for that

1

u/DickMcclaim 10h ago

Mx7 is non conductive so you will be okay it won't hurt anything