r/PatternDrafting • • 2h ago

Question Trouser drafting fitting advice!

This is medium weight stretch denim. I know jeans use yokes etc but for now this pattern has 1x darts front and back.

Some fitting advice would be greatly appreciated! It fits weird under my bum with bunching and also bunching above my bum. Also noted a lot of fabric at the front when I bend forwards..is that too much ease? I don't want it to be tighter fit than this, just want it to fit better. FYI, there is 2 cm seam allowance on the in and outseam and 1.5 cm at the crotch.

I've added pictures of the pattern pieces. The legs were slimmed down a bit as you can see - about 1cm on in and outseam.

NB: First time drafting trousers - I attended a course but I feel that if we had more time some of these fitting issues could have been resolved.

3 Upvotes

2 comments sorted by

2

u/Far-Number4325 1h ago

the front standing looks fine, so i wouldn't tighten the overall ease. the bunching under and above the seat is a shape problem, not a "too much fabric everywhere" problem. you've got a pretty curved seat, and one back dart often isn't enough to shape over that, which is why jeans use a yoke.

start at the back crotch, not the side seams. pin out those loose folds under the bum and see if scooping the back crotch curve about 1 to 1.5 cm makes the seam sit up into the crease under your seat. if it still feels like the fabric can't get over the fullest part, add a little length to the back crotch extension. you'll have to add paper for that, because 1.5 cm seam allowance doesn't give you much to let out. for the bunching above the seat, try a bit more dart intake, or a second dart, and have the dart end near the fullest part of the seat, not short of it. that shapes the hollow of your back without making the hips tighter.

the extra fabric when you bend forward is mostly normal, especially with a higher waist and stretch denim. standing, the front isn't baggy, so i wouldn't take width out of the hips. if it really bothers you, pin a tiny horizontal tuck in the front rise just below the waist, then sit and bend before you sew it in. don't take much, or they'll get uncomfortable to sit in. also, when you slimmed the legs 1 cm on both seams, make sure that wasn't taken from the upper inseam right under the seat, or it can leave a pocket of fabric there. keep the lower leg slim, but leave a smoother transition off the crotch point. and don't fit stretch denim much tighter than this, it'll bag out at the seat after a few wears.

1

u/Strawbs-and-bluebs 7m ago

This is such an amazing and detailed response, thank you.

Yes, when taking in the inseams nothing was taken from the upper inseam area.

I will try scooping out the back crotch curve and see if that helps with the bunching below the bum. I'll also try lengthening the back darts and see if that helps with the bunching above my bum! I want to salvage these trousers if I can so that it looks a bit better.

After that, any of the other changes (increase back extension or second dart) can go onto V2.

Btw, my next pair will be in medium weight cotton twill, no stretch. Are there any other things I need to modify for this type of fabric? Thanks so much!