r/PDXhamradio • u/[deleted] • Apr 17 '20
Locations to buy handheld radios
Hey I'm in the Portland area I was wondering if there's any other places to get handheld radios besides Ham Radio Outlet
r/PDXhamradio • u/[deleted] • Apr 17 '20
Hey I'm in the Portland area I was wondering if there's any other places to get handheld radios besides Ham Radio Outlet
r/PDXhamradio • u/[deleted] • Feb 26 '22
I'm a ham. License a few years back but haven't really gotten into it. It seems like the nets I've seen are full of people who like to "chew the fat" like they say where I'm from. Folks who monologue for minutes at a time telling you a thing, rather than smaller back and forth conversations.
Is this just the sort of things I'm being exposed to? Or is that how it basically all is?
r/PDXhamradio • u/K7MGG • Sep 11 '17
Hi All - I see a number of Winlink gateways in the Portland area, but am unable to reach any simplex.
Are there any Winlink digipeaters in the Portland area?
r/PDXhamradio • u/jam3013 • Oct 09 '22
Hey folks, I've noticed while scanning around 2m and 70cm that occasionally I'll land on a repeator(s) where I'm receiving a strong signal. I think it sounds like an idleing tractor or a diesel engine. I'm assuming this is some sort of digital mode but I really curious to know what it is exactly. Does anyone happen. To know what it is? Thanks.
r/PDXhamradio • u/pdxpatzer • Aug 13 '15
r/PDXhamradio • u/aa6rv • May 28 '17
I'm looking for a good code plug from someone that uses RT Systems software. I plan on moving up there in a couple of years, but visit every so often. I have a ton of radios.....Yaseus, ICOMs, Kenwoods, Motorolas, Hyterias, TYT.....yes, I have a radio problem. I do DSTAR, C4FM, and DMR. I like a well organized codeplug and hopefully someone has spent time creating one that makes sense and is organized by EM Comm, Counties, Police and Fire Channels, etc. If you just slapped all your repeaters together, don't bother. I can download that myself. I want that ham who is an organizational freak, like myself, that spent time creating a good code plug. My radios, hold 1000 memory channels....and I always run out of space. It's all organized, uses Data Banks and has logic to it's order. Then again, I'm in SoCal at the moment and we have more repeaters here than frequencies. Thanks, David, aa6rv
r/PDXhamradio • u/efosmark • Jun 12 '15
I'm planning on casually making contacts on 2-meter SSB. I had a lot of fun with it last year when I worked it from a small town near Salem.
More info here: http://www.arrl.org/june-vhf
r/PDXhamradio • u/pdxpatzer • May 11 '20
r/PDXhamradio • u/pdxpatzer • May 06 '20
r/PDXhamradio • u/tsherrygeo • Sep 24 '20
Is there a club / group / listserv that coordinates Summits on the Air in the Portland area?
r/PDXhamradio • u/buzzsawddog • Mar 22 '20
Just wondering if anyone is doing anything with weak signal on the uhf/vhf bands. If not it would be interesting... I know there is a 2m ssb net a few times a week. Once I get my horizontal antenna up I will bring it up there BUT it would be fun to try some wspr/ft8 etc...
r/PDXhamradio • u/mamatr1ed • Jun 13 '20
Hello, I am looking to obtain/pay for some help setting up my ham antennas. I have a G5RV and an alpha antenna setup, both could use tuning I believe. I'd like as well to have a better antennae put on my roof. Looking for ideas.I just started being active and realize I need a good foundation. TIA.
r/PDXhamradio • u/Money_One_3356 • Sep 24 '24
I volunteer at a small fire Dept by my house in Alabama we use active911 but the dispatchers notes are crap most of the time I want to be able to listen into the radio on my phone, the department doesn't have anything set up like Zello. I don't know the channel/frequency we use I have no idea anything about radios or radio apps am I able to tap into the dispatch channel or am I SOL
r/PDXhamradio • u/[deleted] • Jun 07 '20
I am replacing my 2M/70cm base station antenna and wondering whether getting a tri-band to cover either 6 or 1.25 meters makes any sense. There are a few repeaters on each band in the area but is anyone using them? Or is there any simplex activity that doesn't rely on horizontally polarized antennas?
r/PDXhamradio • u/hamellr • Apr 27 '23
Forewarned, I only briefly dipped my toes into the radio world last century. So please pretend I'm an idiot and have forgotten literally everything I knew about Ham Radio at one point.
But, I do have a unique opportunity to build a CERT communication setup for my company.
I control a server room that is on an oversized generator, with 20+ U of free rack space, three four story buildings in SE Portland/Milwaukie to put an antenna on, and a mandate to be able to spin up communications to the outside world (described as "outside of our region") at a moments notice for when the "big one" hits. I already have a repeater antenna of some sort on one building, but not sure if that can be made a primary antenna and/or if it will cause conflict with another antenna.
Budget is not unlimited, but I can plan multi-years out. For instance I can easily scope out a dedicated radio room in 2025/26. So a "do this in year one, add these items in year two, etc."
Ideally we'd be able to communicate and coordinate directly with onsite staff if cell coverage is down and local EMT Services all in the same space. We'd want backup radios just in case one died. This is not meant to be a hobby setup, but likely will be used as one on a regular basis to confirm all is working. We have a number of employees who are interested in getting licenses for this very purpose. On top of that, for redundancy, I'd like a setup that a minimally trained person could use in an emergency.
Essentially I'm looking for someone to scope this out, and help build and test it once we've purchased hardware and ran cables. (yes, paid) I've reached out to Ham Radio Outlet, but haven't heard back from anyone there. And I'm not sure who the other local companies might be that could do this.
r/PDXhamradio • u/AgnosticFrontNutz • Apr 14 '23
So I'm a new Ham and wanting to build an Ed Fong Roll up J pole for camping/hiking/SOTA and am wondering where to find ladder wire locally to the PDX area. I know HRO is in Tigard but is there anywhere else?
r/PDXhamradio • u/Museumnelson • Oct 17 '22
Hello,
I have had my technician license since early 2020 have been using a Baofeng but want to upgrade to more permanent home shack but everything I find online for what to do costs way more then me on my PPS salary can afford.
So any ideas of what I really need and ways to get it without braking the bank.
r/PDXhamradio • u/tg_smithe • Oct 05 '20
There was an old archived thread about this, so I figured I'd ask the question again:
Is there any packet activity in the Portland/Vancouver area? Besides APRS - I get all the APRS I can handle. I know there's the ARES (?) node K7CLL in Vancouver that I connect to once in a while, but I don't know of any others. I have Winlink covered - I check my mail frequently although nobody ever writes me...
Thanks and 73!
r/PDXhamradio • u/pdxpatzer • Mar 18 '23
r/PDXhamradio • u/Andrea_D • Feb 21 '25
Do we have a local Meshtastic group that like, does stuff?
r/PDXhamradio • u/Cautious-Meal9160 • May 14 '25
HI All! Ive always wanted to learn how to operate a Ham radio. And I have the manual and flash cards but the content is so incredibly hard for me to understand, its just not how I learn. Ive looked online for local in person workshops but am having a hard time coming up with anything. any one have suggestions on how to get some in person guidance?
r/PDXhamradio • u/FertileLies • Jun 11 '25
My father and Elmer recently became a Silent Key and my Mother asked if I would try to sell his radio equipment I didn’t want or need. Since I’m already well equipped, I’m hoping someone here is looking for a used radio in perfect working order.
I have a Kenwood TS-2000 VHF/UHF/HF transceiver, LDG tuner and misc cables - $800
I also have an Icom IC-7300 that he bought in Jan 2025 from HRO - $900. I also have the LDG tuner for that for an extra $100.
More info can be found here: https://sites.google.com/view/ki7jqj/home/for-sale
(KI7JQJ was my old call sign)
If you’d like more info, would like to come see them in action, etc, my contact info on QRZ is good.
Thanks for looking!
W7NFR - Joe