XMacro getting closer to being done on this build
just got the xray5
r/P365 • u/tonytwobones • 8h ago
This is what I used last week to save my child from some sex traffickers. Really gotta say, I love this thing. Now it has sentimental value to me, and her. Not going to get into details because there is an ongoing investigation but this is my new daily.
r/P365 • u/GHK-yonnaise • 6h ago
- p365 AXG Legion fcu
- p365 X 3.1” slide
- Ramjet/Afterburner
- Mischief Machine Commander XXL-Cerakote H-152
- Mischief wooden grips and swell
- Mischief 12rd mag base
- Holosun EPS Core
- Streamlight TLR7X Sub
Been running this configuration for about a week now, wore it with a few different types of outfits, and got a chance to put some rounds through set up like this. And I think after quite a lot of different combinations I’ve finally gotten it to be exactly what I’ve been wanting out of my daily driver in terms of how shootable, concealable, and its aesthetics. Also I can’t recommend Mischief Machine enough, amazing products 🤘🏻
r/P365 • u/slant-ford • 7h ago
Picked this up yesterday and put the holosun on. Looking at the stream light tlr7x for a light. Any other mods anyone recommends?
r/P365 • u/Key-Significance8994 • 1h ago
I need some help. I would like to get get a compensator but I’m not sure which one to get. I’m more than willing to get a long compensator if that’s the best one
r/P365 • u/MuricaMannn • 4h ago
I took the fcu off the gun, and then put it back inside. Now the takedown lever won't go back into place, and i cant take the gun down. Ive already watched the sig mechanics video and depressed the striker
r/P365 • u/PixelThis • 6h ago
My usual holster go to is a blackarch protos M, but I need a holster that fits the axg legion gen2 with a TLR-8 HL-X G Sub attached.
Does anybody know if any holster that isn't just straight kydex that fits this setup?
r/P365 • u/JayCharls • 23h ago
Just dropped off my SIG P365 at a local gunsmith and I’m between the EPS carry optic or the 507K. He says that with either option, he will have to remove the rear sights from the gun.
Is there anyway to keep them?
It is the standard P365 non-cut.
r/P365 • u/adcz3wh88 • 1d ago
Have a 365 Rose 380 ACP need a leather holster
r/P365 • u/Individual_Arm_9039 • 1d ago
Bought this gun brand new with the Romeo RS and sig light for around $6xx from cabelas. I have probably 3 range sessions with the 365 so far. 1st session I was pleased. 2nd session noticed the optic zero kept walking off significantly. Reached out to sig they offered to warranty/replace the optic, cool. 3rd session running it with just irons and noticed nothing was hitting where it’s supposed to. Looked at my sights and the rear sight is completely walking to the left. Is this gun just genuinely a POS or am I just an unlucky bastard? Considering getting rid of it…
r/P365 • u/phuctupchuck • 2d ago
Picked up my 2nd P365, $649 for this combo at Academy seemed like a good price. I bought my first one when they first came out and love it but was not tapped for red dot. This one comes with the red dot 5 mags and a bag. Whatcha'll think?
r/P365 • u/AdorableFan1439 • 3d ago
r/P365 • u/jeffe3000 • 2d ago
I'd like to see the back of it (body side) if you do. Elite or lite is fine. I have the Aren lite for my prime and love it. Went another direction for my 365 and it's not doing it for me. Trying to rule out if it's a holster specific issue. Thank you in advance.
r/P365 • u/Amonkeysuncle6969 • 4d ago
Thanks everyone who commented on my last post and helped me with my FCU issues! X-Macro build with the flat trigger is ready for the range tomorrow!
r/P365 • u/[deleted] • 3d ago
Would this sight fit on this p365? It says “optic ready” on the description of the gun.
r/P365 • u/Time-Worth8397 • 4d ago
Some of you may have seen my previous posts or my post to r/firearms. https://www.reddit.com/r/Firearms/s/YAcFgmPPNV. TLDR previous shitty gunsmith who claims he could “cerakote” did an unforgivably shitty job. Damn near destroyed the gun. But I found an incredible company who saved the build, fixed a few things and re-coated it.
I finally got my p365 finished. Cerakote redone and fixed. New guy did an incredible job and I am so happy how it turned out.
This project was mostly just for fun, it’s almost all aftermarket. If it survives a 2,000 round torture test it’ll enter my EDC rotation.
But at long last, ITS finished
r/P365 • u/Honest_Possession_47 • 3d ago
I had an xmacro for a while and all was good with the mag release. Have a legion and 365-380 with the two piece plastic design. Does anyone recommend replacement with the maskas version? Is it worth it or should they just stay with the factory ones? Curious if people have had problems and what the solutions are or is the Sig one fine.
Thanks in advance
r/P365 • u/PlayfulBrother4100 • 4d ago
Just got the fossil watch for my 21st yesterday!
r/P365 • u/Irish671 • 4d ago
Nearly 4 years and about 3k rounds later, I still prefer to carry her for most occasions.
r/P365 • u/GHK-yonnaise • 5d ago
Mischief Machine commander xxl came in today and this thing is just plain gorgeous! Very clean machine work and the cerakote is beautiful. Just waiting on a mag release so I don’t have to rob any of my other grips and a “stainless” p365 slide I ordered to color match along with a ramjet. Going for the full flat stainless look and also picked up the wood grip and swell inlays because I think they’ll really round it out
r/P365 • u/KeyFoxbody • 4d ago
Looking to switch up my daily carry rotations of glocks and add an sig. My go to is currently a g19 gen 5 (the Toyota Corolla of pistols) but I’m looking for something much more comfortable to carry in the Texas summers.
I prefer AIWB as it is the only way to carry lol.
I’ve shot the 365 with extended mag and block and it felt almost identical to the 365X.
Is the trigger and optics ready slide really worth the extra ~$200? I have red dots on some of my EDCs and it’s nice but not an absolute necessity.
Last question: any knowledge on Black Friday/cyber Monday deals to be on the lookout for?
r/P365 • u/Extra-Ground132 • 5d ago
Goodmorning,
I have a P365 and I put on a chamber flag. Unfortunately the gun is stuck and does not move. I need help.
r/P365 • u/Honest_Possession_47 • 4d ago
Hey show me your sight picture with factory iron sights co witnessing with your Romeo x compact enclosed optics on your p365s please. I haven’t gotten mine all together. I’m excited to see some co witnessing on some sighted in pistols!
Thanks in advance