What u guys think

Very happy to have gotten this. Can’t wait to play with it 😎

Maple Leaf stock adapter, 5KU skeleton folding stock.

Magpul BAD Device (fits no issue)

BCM Gunfighter GBB grip ( factory grip pinched the shit out of the airline)

Strike Industries short grip

Element weapon light

Amazon dual switch

Avengers DE Red/green dot sight.

Novritsch steel half-bolt

115psi Redline SLP regulator and tank

I just received my SSG11 today, looking forward to take to it the field and have fun with it.

Configuration: standard, ~2J ~460 FPS

I’ll run it with 0.46g BBs

Game day 2 and I am loving my SSX10. I've added an extension to the rear and routed the hpa line to a more comfortable position. Next step, barrel experimentation.

Hello peeps! I 3d printed some mag assists for our HPA magazines! Can be found at thingiverse on the link below

https://www.thingiverse.com/thing:7386291

Hope you find this helpful!

I just got the SSP5 4.3” today and so far it’s been really solid. I tested it a bit in the backyard and the feeding is perfect, even during rapid fire there were no misfeeds, no jams, nothing. Just chef’s kiss perfecto.

The only issue I had was with the magwell. The tolerance felt a bit off so it was really hard to seat the mag at first. It even got slightly scratched while trying. The pin also isn’t fully flush, but it still holds fine. Once it finally clicked in, everything worked as expected.

Overall though, it shoots great.

I’ve seen some comments in the past about ways to improve the mushyness of this trigger but for some reason cannot find them now. I love this setup. Been using this gun as a main recently with a MP5 hpa adapter and it’s been super fun. Coming from using mostly rifles, this has been a blast. But the trigger is not crisp and I know there has to be a way to fix it but looking to those with more experience on this platform on the best way to go as I know there are many pieces to this build that are proprietary to Novritsch.

Bit of a late post, but I went to my first game in about 4 years and absolutely loved it.

Apart from one well-known but minor issue - the screw in the bolt assembly worked loose, making the trigger inoperable - and my opinion that it didn't have enough lube on the bolt assembly and upper receiver out of the box, it was amazing. If I hadn't brought a small tool kit just in case, my day would’ve been over early.

This is my first GBBR and I couldn't be happier. It got a ton of attention and compliments on its look, feel, performance, and accuracy.

Someone on my team was running an SSR4 too, which was cool to see.

Novritsch really knocked it out the park with the SSQ4

I just want to share my ssr77 dmr setup.

Been running single stack 1911s for over a decade now. Finally decided to upgrade for mostly outdoor use. I find it funny I was able to just slap the Grace M1 replica with a couple of M4 screws without the red dot plate. I might get it just to lower the bore over axis. Not sure if a couple of millimeters is worth it tho.

Upgrading to a cow cow champ leaf spring made the trigger feel so much better. Loving this thing... Can't wait to take it out for a spin!

Thought I would see what difference a 430mm VSR barrel would make this weekend. Game day tomorrow. Will report back 👍

The ssg 10 on the left was the one that started my airsoft collection. I bought it because I wanted to practice 10m target shooting but didn't want to dump 1k+ on a pcp target rifle. The biggest reason is every time I practice I end up shooting 500+ bbs, any pcp on the market would be toast. Then I would have to ship them back to the company for warranty. The ssg10 isn't like that, it broke on me once, most of the shots were with the m220 and it sheered the sear spring. I was able to fix that in 15 min. That ssg10 has >20k shots through it currently. The one on the right is my homage to the gun that started it all. (I just got it today so I don't have any shots on it like I do my 10)

Deffo gonna buy more mags

I designed and printed my own body for my SSG10 A1 and i love it

This is designed for the long barrel and all accesories still fit.

I posted my model on makerworld so if you have a printer you can print it to

All I’ve been hearing, reading and seeing about the SSQ4 is the HPA version. I’m more interested the gas version.

Anyone with experience, know of anyone running one, or know of any videos and/or write-up’s about the gas version?

I would love to see & hear more about the, what seems like, forgotten sibling lol.

lets go barrel to butt. 510mm maple leaf outer + 6.04mm crazy jet inner barrel, 80 degree hop up bucking, cv life sling stud bipod, 100g weighted piston, m220 spring, 3x9x50 scope, novritsch sunshade, monstrum sunshade mounted to that, monstrum 6 bolt mounts, novritsch rail, colored bolt handle and end cap (black) and m5x10x10 stock spacers. I built it because I love shooting but I don't want to spend all my money on real ammo. @ 20 yards it stacks the .49g bbs on top of each other, testing it at a private 50yd range tomorrow.

Hello everyone. I am pleased to release (for free) the files to print your very own SSX10 upper barrel cover and end cap.

https://makerworld.com/models/2986412?appSharePlatform=copy

The end cap just clips into the end of the lower mlok section covering the ugly green gas valve ( that most of us won't be using.) it also serves as the retention clip for the upper outer barrel cover.

The upper barrel cover must be used with the end cap to hold it in place.

If you like it please drop me a.like or even a boost on Makerworld as it makes a difference to me and costs you nothing 🙏

Not for everyone I know, but my mate asked me to make one for his new SSQ4...so I made 2😂

Field test this sunday. 3d printed in PETG GF.

Hey guys! This is my recently purchased SSR4 Mk2 airsoft rifle. It has had a few upgrades, and its current muzzle velocity is around 145 m/s (475 FPS).
I’m having some issues with it and could really use some help.
When I use semi-auto mode, it sometimes doesn’t fire after pulling the trigger once or twice. But after the third pull, it suddenly fires 2–3 BBs at once.
I’m not sure what’s causing this or how to fix it. Has anyone experienced something similar or knows what might be wrong?
Also, is it possible to upgrade it further to make it more powerful?
Any help or advice would be greatly appreciated. Thanks in advance!

Integrated HPA module inside, no funky external adapters needed. 125BB capacity, full auto, recoil, everything that we love about GBBRs powered by HPA. And if you're a gas purist like me (Josef 🤟🏻) - you can still use the classic gas variant with real caps and only convert within 10 minutes from gas to HPA when the temperatures drop a bit too much. What do you guys think?

PS: I know everyone is waiting for the AK SSR74, but we thought we will throw in an early summer surprise. 😁 The AK is next, I promise. 🤫

OK it pains me to share this as it will ruin the aesthetic of the SSQ4 but will keep you Pew Pewing while we wait for more hpa mags to restock.

This is being made available for Free to the community, please drop the model a like or a boost, it costs you nothing but helps me out 🫡

Please note the following:

1. I accept no responsibility for anything, if you RIF explodes it's not my fault 😂

Current Release is V0.3 and just requires a small spring for the mag lock arm.

https://makerworld.com/models/3049720?appSharePlatform=copy

Going to my first milsim day. Hopefully i brought enough?