r/NetBSD • • 8h ago

My NetBSDEeePC

Post image
45 Upvotes

I use to run void linux on this, but i got bored from it. It uses about 300mb~ of ram on idle, and LxQT battery icon doesnt work. There is also isnt a build of firefox of i386, but Netmoon(Palemoon) runs fine, some sites doesnt work. Overall, its a great experience.


r/NetBSD • • 23h ago

Do I install -CURRENT or 11.1? Used Debian unstable for 20 years, and I'm considering -CURRENT for (maybe?) earlier access to graphics drivers. (And maybe wifi too)

12 Upvotes

I will soon install NetBSD on an Acer Aspire 5 A515-45-R478. This one has an AMD Ryzen 5-5500U, with integrated AMD Radeon Vega 7 GPU. So I'd like to ask wether it makes any difference to install -CURRENT instead of 11.1 for the graphics. It also has Wi-Fi 6 (which, as I understand, is not supported on NetBSD 11.1)

Also, even if not for the graphics, is -CURRENT OK for someone who used Debian unstable for 20 years? If anything breaks, is it easy to perhaps roll back and wait for a fix? And are problems fixed quickly?


r/NetBSD • • 1d ago

Help to use NetBSD

21 Upvotes

Hello guys ! , i had an old computer on the Storeroom , so i said maybe should i install NetBSD on it an make it as a retro-pc that i could usually use it everyday case
Note : i'm not a noob (: , i had used Linux for quite a while now like 2 and a half years and i want something not AI-generated kernel LoL , so yep came from void linux to NetBSD


r/NetBSD • • 1d ago

Google Summer of Code 2026 Mentor Summit in Munich, Germany: travel notes

Thumbnail blog.netbsd.org
2 Upvotes

r/NetBSD • • 3d ago

How brittle are disks in NetBSD?

16 Upvotes

Hi, so I've been wanting to give NetBSD a fair shake having previously daily drove FreeBSD and OpenBSD. I was reading either the wiki or the handbook the other day and it was talking about how easy to cause disk corruption in NetBSD is. Specifically in the section on VMs it said never hard power them off because of disk corruption. I take it the Fast Filing system FFS used by NetBSD is similar to the one employed by OpenBSD because of the similar heritage, and despite having to hard power that os off a time or two I never caused corruption that was noticeable.

So, how pervasive is disk corruption in NetBSD and what are ways to mitigate it? I read about a sync option for FFS, even though that slows down the disk io does it eliminate disk corruption? NetBSD also seems to support zfs storage. How easy is that to setup? I found some not really good recommendations of using zfs with the disk encryption framework. Disk encryption is important to me in all laptops even if it's not my primary laptop.

So tldr -

  1. how pervasive is disk corruption?

  2. Does sync or another mount option mitigate it?

  3. If not, how easy is it to setup a ZFS system with fde?

Thanks in advance! Even though I've never ran NetBSD in anything more than a VM, I've always admired it and thought what you guys have built with so little funding is amazing! Thanks for your time.


r/NetBSD • • 4d ago

Problem installing on Proxmox + KVM: exec /sbin/init: error2

Post image
9 Upvotes

I am pretty new to NetBSD (20+ ys Linux user), I've been trying it out successfully on some older laptops and qemu VMs, and now I am trying to install it on two virtual servers. They're hosted at two different companies, which apparently use custom web UIs to wrap a Proxmox Virtual Environment + KVM. They both offer to mount an ISO as a virtual drive, which I did using NetBSD 11.0 for amd64.

I do get the ISO's boot prompt, I choose "Boot normally", and then, strangely (to me) end up with the very same error on both VMs: Apparently init can not be found, 4 different options are being tried, after which I get dropped at a prompt to give a custom location. See the screenshots of the hosts.

So far I only have a vague idea of the boot process, it looks like the file system to locate /sbin/init in can not be found or identified correctly. I've never had this problem with a local VM. What surprises me is that these seemingly unrelated virtual machines produce the same error.

I also observed that each VM seems to detect more than one virtual CD/DVD drives, even though only one ISO should be mounted.

Before I try random stuff from the web, any tips on how to approach this, and get NetBSD installed?


r/NetBSD • • 4d ago

State of Wayland on NetBSD

18 Upvotes

It’s been a while since I have installed NetBSD. Coming from Linux, I was wondering how well supported is Wayland on NetBSD ? I mainly use Sway on Linux and I am currently trying to configure it on NetBSD 11.1 using i915 DRI. I still have crashes running Wayland apps. I am looking for resources on how to have it running flawlessly. Any hints ? Blog posts are welcome !


r/NetBSD • • 5d ago

An editor is born

Thumbnail blog.netbsd.org
37 Upvotes

r/NetBSD • • 6d ago

My NetBSD booted in a Virtual Machine fastfetch

Thumbnail
reddit.com
3 Upvotes

r/NetBSD • • 6d ago

Disk encryption on NetBSD - achieving secrecy

Thumbnail netbsd.org
20 Upvotes

r/NetBSD • • 12d ago

NetBSD on daily drive... How good it is for T420?

17 Upvotes

Hello. so, i was using OpenBSD before and i was wondering how good NetBSD is for daily driving. My daily uses are:

-browsing
-pdf reading via zathura
-a terminal
-window manager

Thank you and good evening.


r/NetBSD • • 13d ago

NetBSD 11 desktop on a Raspberry Pi 4

Thumbnail neongd.com
28 Upvotes

r/NetBSD • • 13d ago

Spontaneous kernel panics: "input state should never be -6" and a known working WiFi card working on a thinkpad L420 but no a T520

4 Upvotes

Thinkpad L420 with i7-2640M getting random kernel panics after executing tasks. Inputs will freeze, then soon after, output on the screen will freeze, then the system shuts off completely. Rebooting will see it at POST at minimum brightness and there will be a message reading the above in quoted after saying it shutoff after a panic.


r/NetBSD • • 14d ago

Static IP Server in 5 min

Thumbnail
youtu.be
11 Upvotes

r/NetBSD • • 15d ago

Upgrading NetBSD from 11.0 to 11.1

Thumbnail dwarmstrong.org
17 Upvotes

r/NetBSD • • 15d ago

New to NetBSD, Kernal panic immediately upon first boot after install

Post image
9 Upvotes

Computer pictured is a ThinkPad L420 with an I7-2640M and a 256gb Micron SATA 6Gbps SSD. Does anyone know what this output would suggest?


r/NetBSD • • 16d ago

Why is NetBSD so janky?

0 Upvotes

Why is NetBSD such a janky operating system? I love the fact that it is so traditional and portable, but its jankiness is just something that can't be avoided.

The drivers are bad. Minecraft, the only game I really care about in the long run, has its framerate halved on NetBSD compared to what I get on literally any other operating system, including OpenBSD. But there is definitely some hardware acceleration here, as it still runs loops around Haiku, which just uses llvmpipe for everything (aka. no drivers whatsoever).

NetBSD 10.0 completely nuked mouse acceleration, which means the mouse now moves at a constant speed regardless of how fast you swipe it. It's really annoying. 11.0 fixed it, but only along one axis. How is that even a thing?

There are no fully working NTFS drivers. NTFS is the one filesystem that works on every single desktop operating system I know of. Except for NetBSD. The ntfs-3g FUSE driver is technically present, but it spits out a bunch of errors if you actually try to use it, and as far as I remember only reading from NTFS drives works. One could say that, on the plus side, it at least doesn't damage the drive. Duh.

There are also no login managers save for slim and xdm. Everything else has been stuck in wip for years with no merge in sight.

Also, X11 lib and include directories are not included in the compiler search paths by default, and it makes compiling some programs such a pain.

And I just want to ask, Why is this a thing?

Writing drivers is hard, but one can go the easy route (what the other BSD systems do) and just steal Linux drivers. They do have issues, but they are certainly better than the nonsense NetBSD ships with today.

The mouse issue is so silly. It all worked fine in 9.0, then got screwed in 10.0, and 11.0 fixed it only along one axis. Who is even responsible for this? How can you only partially fix something like that?

And so on.

Just why? I love NetBSD for its retro vibes, but this jankiness is just so frustrating at times.


r/NetBSD • • 18d ago Bravo

NetBSD 11.1 is on CDN

Thumbnail cdn.netbsd.org
41 Upvotes

r/NetBSD • • 17d ago

0verbs - download offline database and search for packages

3 Upvotes

r/NetBSD • • 20d ago

BSD, illumos, OpenZFS, bhyve Devroom was accepted @ FOSDEM'27

19 Upvotes

Spread the news 📣

We are excited to announce the BSD, illumos, OpenZFS, bhyve Devroom was accepted @ FOSDEM'27

The CFP is open, all the details are on the website
https://people.freebsd.org/~rodrigo/fosdem27/

You can now start submitting your proposals till December, but of course the sooner, the better.


r/NetBSD • • 21d ago

Enlightenment 0.28.0 Release

Thumbnail enlightenment.org
22 Upvotes

r/NetBSD • • 21d ago

What's your favorite text/code editor?

23 Upvotes

r/NetBSD • • 24d ago

NetBSD adds atto text editor to base system

Thumbnail mastodon.sdf.org
39 Upvotes