r/NSFW_DIY • • 11d ago

Where do I buy molds/plastics for toy making? I have an idea… NSFW

1 Upvotes

Has anybody ever thought about making silicone attachments for the N-joy pure wand?

I was thinking about how Bad Dragon makes their toys with different textures and soft/firmness levels. I think it would be a good idea to do different textures silicone caps that go over each end of the N-joy pure wand which is already a popular toy. There could also be different firmness levels that come with those silicone caps. These caps would also extend onto the arm of the toy down to the head at the other end so when you’re using it, you can hold onto the silicone so it doesn’t slip off.

I want to use platinum silicone for this idea.


r/NSFW_DIY • • 21d ago

I made a doorframe insert gloryhole NSFW

Thumbnail
gallery
1 Upvotes

r/NSFW_DIY • • Sep 13 '26

DIY Automatic edging machine NSFW

Post image
13 Upvotes

Hi everyone, I'm working on building my own automatic edging machine. The first prototype is a bit of a mess, but it's coming along nicely!It work with an inflatable butt plug, and the three potentiometers are used to control the threshold, the vibrator speed, and the delay between one edge and the next. For now, I’ve used a generic motor, but I plan to adapt my Fun Factoy VIM (love that thing!) to work with the system. In the meantime, I’m also designing a 3D-printed housing


r/NSFW_DIY • • Jan 18 '26

Modifying platinum cured silicone dildo to ejaculate NSFW

6 Upvotes

Hi! I have a platinum cured silicone dildo that is by far my favorite dildo ever. I am very sensitive to materials, size, and texture, and i have bought too many looking for one that works for me. I am reluctant to spend money on a premade ejaculating dildo that I’ll end up hating. I bought two other models from this brand I love and would like to modify one of them to be an ejaculating dildo with a squeeze reservoir. Bonus points if I can also add a vibrator somehow. I was thinking I could maybe use a long needle like a biopsy needle (has a removable inner core/stylette so it doesn’t get clogged or core out the silicone, just pushes through it) then remove the stylette and pass tubing through the needle.

  • Any other thoughts on how to get the tubing into the dildo?

  • How can I seal the end around the tube to prevent fluids from getting around the tube where it can’t be cleaned? I can see how having the hollow tube might make for some sanitary concerns, but I think I could overcome that by being cautious about how close to the tip the end of the tube is so that the silicone somewhat closes around it until the ejaculation pressure is applied. Thoughts?

  • What type of tubing material would be best? Silicone tubing may compress and react with the dildo material, and I’m not sure if stiffer TPU will react.

  • How could I get a vibrator in there? Core out and stuff a bullet in somehow then replace the core? I can’t see how this would work unless I could also add a charging hole or the core was removable so I could change the batteries. This might be asking too much…..


r/NSFW_DIY • • Jan 08 '26

This should be a fun night!! NSFW

109 Upvotes

It was a quick and somewhat dirty build but it looks like it willl fuck :P


r/NSFW_DIY • • Dec 17 '25

Any designers need a maker? NSFW

Thumbnail reddit.com
5 Upvotes

r/NSFW_DIY • • Dec 01 '25

Lovense Solace Pro DIY Adapter/Mount for Any FullSize Fleshlight instead buying the replacement adapter NSFW

7 Upvotes

Hey everyone,
I designed a Fleshlight mount for the Lovense Solace Pro and just finished a new, more stable version.

Main changes: stronger clamping, less wobble and easier assembly.

The 3D model is available on Cults3D for anyone who wants to print or modify it themselves. If you don’t have access to a 3D printer, you can use any online 3D printing service that accepts STL files.

Pictures of the new version:
https://imgur.com/a/pTWl6bz

If you have ideas for improvements or questions about print settings, feel free to ask in the comments.


r/NSFW_DIY • • Jun 14 '25

Heres my diy dildo + tutorial (Hope it helps! <3) NSFW

Post image
383 Upvotes

r/NSFW_DIY • • Jun 08 '25

DIY mains-powered flywheel machine? NSFW

6 Upvotes

I'm looking to have a bit of a project and would love some advice.

I'd like to build a machine (like your traditional fucking machine) that utilises a flywheel. It needs to be something with an adjustable stroke length (likely with different fixings on the flywheel, I'm assuming) and it needs to be able to fit a flashlight on the end. It would also need to have a power control to control the rpm of the flywheel.

I've done a bit of research and I'm not coming up with much in the way of plans or guides. I'm flexible in terms of what it looks like, what materials it uses, but I'd really like a starting point if someone can point me in the right direction. Thank you in advance!


r/NSFW_DIY • • May 25 '25

Hands free swing NSFW

Post image
50 Upvotes

or swing with leg restraints depending if alone or with a friend 😅 and an adjustable mount for toy to get the right angle


r/NSFW_DIY • • Apr 05 '25

Doesn't look too scary, does it? NSFW

Thumbnail
gallery
84 Upvotes

r/NSFW_DIY • • Mar 03 '25

Titanium Dioxide for white Cumlube-food grade necessary? NSFW

1 Upvotes

Titanium dioxide for white cum lube- food grade necessary?

Hello, i am following a fan recipe to make cumlube for use in squirting dildo, using x-Lube. The recepy asky for food grade titanium dioxide as white coloroing, but the one i ordered turned out to be not for consumption according to the packaging. Now i do not really plan on ingesting it, and it says on the packaging it is non-toxic, so my guess is that it is basically the same as the food coloring variant, but not produced to the same standard of purity/ cleanliness that it would necessarily meet the criteria for safe for consumption. Do yall think it is fine to use it anyway? Its gonna be used like you would expect lube to be used. Thanks in advance for your thoughts.


r/NSFW_DIY • • Jan 06 '25

Easy anchor point for the massage table many of us have. And all of us should have… NSFW

Post image
24 Upvotes

r/NSFW_DIY • • Jan 04 '25

Made a dual density dildo NSFW

Thumbnail
gallery
60 Upvotes

Wanted to test my dual density design, made this 50% size and it came out very nice.


r/NSFW_DIY • • Jan 01 '25

DIY Buttplug Update NSFW

Post image
18 Upvotes

It’s nice and big… will try it in a min


r/NSFW_DIY • • Dec 31 '24

Tell me what you think of this dual density design NSFW

Thumbnail
gallery
27 Upvotes

r/NSFW_DIY • • Dec 13 '24

DIY'ed a hand harness NSFW

1 Upvotes

got a thigh harness and there was a lot of extra straps that i cut off and sealed and decided to make a hand harness with the extra material. was actually super easy and only took maybe 20 minutes.


r/NSFW_DIY • • Dec 13 '24

Need a phone holder to record your Car fun? NSFW

Thumbnail
gallery
50 Upvotes

All you need is a rolled up window, a "live strong" style rubber bracelet, and a kitchen steak knife. 1.insert steak knife into window jam, blade down. 2.put bracelet around phone 3. Put bracelet around knife handle and twist sideways so the phone doesn't fall out. 4. Can he rotated as desired per 180 degree rotations.

5. Record :)

Go team! Tested and approved that same day.


r/NSFW_DIY • • Dec 05 '24

I made a monster NSFW

Post image
78 Upvotes

A new mold design I made, you don't need to worry about bubbles getting air trapped when casting, the mold has all the vent holes in the right places. Just print, sand it and cast. This one is huge, for all the size queens and kings out there.


r/NSFW_DIY • • Dec 04 '24

[Furry] 3D printable Equine and Canine Shaft can holders. NSFW

Thumbnail
cults3d.com
1 Upvotes

My partner made these in blender, please send him some support and have fun printing some naughty can holders ❤️


r/NSFW_DIY • • Dec 04 '24

A few questions NSFW

4 Upvotes

Hi yall I've been thinking of making a custom silicone pussy

Im looking for pre-made designs of molds I could make using 3d printing, I have found one that I could print but I'm open for suggestions.

I don't know which silicone I should use I have heard that normal silicone is very dangerous it leaves bits of plastic or something could some one help me choose the correct type of silicone?

And also I don't know how much silicone I should buy I have calculated the volume of my cylinder would be about 4cm3 could my calculations be wrong?


r/NSFW_DIY • • Dec 03 '24

I just hate parting lines on homemade toys NSFW

Thumbnail
gallery
1 Upvotes

I just hate the flashing that I get with two part molds, the parting lines look so unprofessional. So I decided to change that amd make a seamless mold for my next toy, well at least seamless for the fun usable part. Just make sure that the z-seam on your slicer runs on the outside. Link in the first comment. Let me know what you wanna see next.


r/NSFW_DIY • • Nov 30 '24

Amazing masturbator NSFW

Thumbnail
gallery
37 Upvotes

With fun bits an all. If you have a 3D printer you can make one


r/NSFW_DIY • • Nov 16 '24

Can you braid? NSFW

Post image
32 Upvotes

Braided yarn, twisted paracord, PVC: coupler, pipe, end cap.

This is an easy to make flogger


r/NSFW_DIY • • Oct 16 '24

DIY Dual density mini silicone cast prototype done ! NSFW

Thumbnail
gallery
31 Upvotes

Got around to actually casting a silicone model of one of the dual density molds I designed! I don't have a vacuume chamber so there are little micro bubbles, also I did not resin coat the inside as this was just to cast a little mini proto type. Steps are as follows:

  1. Pour the soft silicone to where when you put in the core insert it will almost fill up the brim but not quite all the way.

  2. After the soft silicone cures remove it from the mold and remove the core

  3. Insert dildo back in to mold without the core insert

  4. Pour the firm silicone in to the cavity that was left by the core insert and let cure

  5. After the firm silicone has cured, pour the soft silicone in again to fill the mold to the brim, this will seal the firm core in to the dildo and allow it to be completely encapsulated.