r/Monitors • • 6d ago

Discussion 720Hz at native 1080p, glossy 0.3% reflectance, and 27” 5K: The future of Tandem WOLED gaming monitors

36 Upvotes

Hey r/Monitors,

Last month, I headed to Seoul to see the newest Tandem WOLED gaming monitor technology in person. I got a look at the current panels, and more importantly, what’s coming next.

Disclosure up front: LG Display invited me to this event and covered part of my travel. All opinions are my own.

Before I get into all of the phenomenal new features I saw, here’s a quick refresher on where Tandem WOLED gaming monitor panels stand right now:

  • The stack: Primary RGB Tandem 2.0 stacks four separate emission layers (B-G-B-R) that together produce white light, which then passes through an RGB or RGBW color filter. The "W" in WOLED is the white light, not the white subpixel.

  • Speed: Up to 540Hz with 0.02ms GtG at native resolution, and up to 720Hz on Dual Mode models. The 540Hz panels hold VESA's ClearMR 21000 certification.

  • Brightness: Up to 1,500 nits peak in HDR (1.5% APL) with DisplayHDR True Black 500, and up to 355 nits typical in SDR.

  • Color: 99.5% DCI-P3, with Intertek certifying Delta E ≤2 color fidelity up to 500 lux.

  • Ambient light: 1.1% reflectance, plus UL Perfect Black, Perfect Color, and Perfect Reproduction certifications up to 500 lux. 

  • Subpixels & text: Most current panels use an RGBW stripe, arranged R-G-W-B. RGB stripe panels are also available, which trade some brightness for improved color volume and significantly better text clarity.

  • Eye comfort: Eyesafe CPF60 and RPF40 certified, plus UL Discomfort Glare Free.

  • Form factor: A 1-glass structure allows curves down to 800R, along with 4-sided borderless designs and 21:9 ultrawides.

  • Lineup: 

    • 27” 16:9 at 1440p or 4K, with native refresh rates from 240Hz to 540Hz

    • 31.5” 16:9 at 4K, with native refresh rates from 165Hz to 240Hz

    • 34” 21:9 at 1440p, with native refresh rates at 240Hz

    • 39” 21:9 at 1440p or 5K2K, with native refresh rates at 240Hz and 165Hz respectively

    • 45” 21:9 at 1440p or 5K2K, with native refresh rates at 240Hz and 165Hz respectively

For a more in-depth breakdown, check out this piece I wrote earlier this year: What is Tandem WOLED? — A Deep Dive into LG Display's Latest Gaming Monitor Technology

Now for the part I’ve been most excited to share: what’s next for Tandem WOLED:

1. 720Hz at native 1080p (and it's glossy)

Two new 24.5-inch esports panels featuring Tandem WOLED technology are in production, with ASUS among the first to use them. One runs at 540Hz and the other at 720Hz, both at native 1080p, meaning no dropping resolution to hit the top refresh rate like current Dual Mode panels. They’re also glossy, which is interesting since esports monitors have traditionally gone matte.

This particular demo had these colored boxes shifting across the screen, running next to a 600Hz LCD with backlight strobing. The LCD had visible light-colored trailing behind moving objects — especially with the blue — while the Tandem WOLED panel stayed crisp. 

On paper, 540Hz and 720Hz Tandem WOLED panels don’t sound massively faster than a 600Hz LCD, but this is where Tandem WOLED's 0.02ms rapid response time does the heavy lifting. Refresh rate alone doesn't tell the whole story if the pixels can't keep up. This was clear in the demo, as the 540Hz Tandem WOLED was visibly clearer than the 600Hz LCD despite the technically lower refresh rate, while the 720Hz Tandem WOLED was the clear winner.

In practice, that means clearer, more natural motion, especially in fast-paced FPS and esports games. It’s also why Tandem WOLED earned VESA’s ClearMR 21000 certification, the highest motion clarity tier VESA offers.

2. Glossy 0.3% reflectance with new SAR coating

This is the one I was most excited about. Current Glossy Tandem WOLED panels with AR coating sit at 1.1% reflectance with no raised blacks from ambient lighting, which is already the primary reason I prefer WOLED. A new SAR (Super Anti-Reflection) coating at 0.3% was showcased side by side with the current AR (Anti-Reflection) at 1.1% and AGLR (Anti-Glare Low-Reflection, AKA Matte) at 1.7%. I asked for all the bright LED overhead lights to be turned on to capture the difference, and this was the result:

In both the room-light reflections and the reflection of another monitor, the SAR coating excelled. For the nerds in the room, the reflectance percentage was measured at 550nm, which is near the peak sensitivity of light for human eyes. I already loved glossy Tandem WOLED panels with their deep blacks, but this brings it to yet another level. The timing of this coating is still under review, but it is expected to be available for purchase in the near future.

3. 27" 5K at 220 PPI with RGB Stripe

A 27” 5K panel with 220 PPI and an RGB stripe was also on display. For reference, 27" 4K is about 166 PPI, so this is a big jump in sharpness. The clarity of this monitor was absolutely astonishing.

For anyone who does creative work, especially on a Mac, this will be top-tier, since 220 PPI matches the pixel density macOS is designed to scale for. They’re targeting a 120Hz refresh rate with a TrueBlack 400 rating. This one is still a prototype with no monitor announced yet, so don't hold your breath.

4. TrueBlack 1000

Current panels top out at TrueBlack 500. A new 27-inch 540Hz panel featuring TrueBlack 1000 and peak brightness of up to 2,000 nits was showcased. While I unfortunately can’t show a picture due to licensing, the near Mini LED brightness with zero blooming looks truly incredible. The panel is designed to achieve up to 2,000 nits at 2% APL and approximately 560 nits at 100% APL. However, don’t get too excited: there is no official release date, so think of it as where the tech is heading rather than something you’ll buy next year.

5. Tandem WOLED vs RGB Mini LED

While this currently only applies to TVs, I wanted to touch on it as RGB Mini LED monitors are starting to come out. Blooming can be quite bothersome on traditional Mini LED panels, but RGB Mini LED introduces color crosstalk. It’s a side effect of color dimming with the individual r/G/B LEDs in the backlight, in which the colors in surrounding areas affect one another and appear mixed.

It’s quite visible that on the left and center TVs the white content is slightly color tinted according to the nearby colors, while the Tandem WOLED TV on the right keeps pure whites. For more info on this I’d highly recommend checking out this video from HDTVTest: 1 OLED Takes on 4 RGB Mini LED TVs - Here's What Happened

Recap

All in all, I'm really excited for where this tech is headed. Tandem WOLED was already my go-to for gaming, and after seeing what’s coming next, it's only getting better. Faster speeds, sharper text, brighter HDR, and even lower reflections are all on the way, and I can't wait to get some of these on my desk.

If you have any questions, leave them in the comments and I'll happily answer, or feel free to come chat on Discord.


r/Monitors • • 11h ago Bravo

Discussion Fixed my BenQ EX3203R vertical rainbow stripes with a piece of tape

Thumbnail
gallery
156 Upvotes

I bought the BenQ EX3203R in July of 2020 and paid $600 CAD. Unfortunately, a few days ago the VA panel faded into vertical rainbow stripes and I thought the monitor was completely toasted.

I started tearing it down to see how it worked and decided to ask AI for help by showing it pictures of the issue. First I tried cleaning the main display cable pins to make sure it wasn't just a loose or dirty connection, but that didn't work.

Later I tried unplugging the ribbon cable connecting the two halves of the screen, which resulted in one half working perfectly. That meant the other side had a short dragging down the whole display. I was told to try putting a tiny piece of tape over pins 1 to 7 on that ribbon to isolate the short, plugged it back in, and fired it up.

Since panels drive the screen from both sides, blocking off those shorted pins let the healthy side take over and the whole monitor started working perfectly again. I'm posting this here in case anyone has the same issue as me, I'd love to save a few monitors from going into the landfill!


r/Monitors • • 6h ago

Discussion Thoughts on this OLED at Costco?

Post image
19 Upvotes

Saw this at Costco. Don't really need it but it seems like a pretty good deal for an OLED. What do you guys think?


r/Monitors • • 5h ago

Photo Random circle appeared on monitor

Thumbnail
gallery
15 Upvotes

The monitor is an AOC 4k OLED, turned it on only to be greeted with this small circle. Only had it for about a year and I tried using the pixel clean tool built in however that didn’t do anything.


r/Monitors • • 7h ago

Photo Is this white haloing normal on my VA monitor?

Post image
8 Upvotes

Just noticed it while booting up the PC. It's not as white in person, my phone processed it that way. It's mostly in the corners.


r/Monitors • • 12h ago

Text Review LG 27GM950B Review - Even Better With Time

Thumbnail
gallery
15 Upvotes

I received this product for free from LG as part of an event. While I was asked to share my review, all opinions are entirely my own.

Introduction

I’ve been using the LG 27GM950B monitor for a couple of months now, as a professional photographer, music creator and gamer.  I tend to notice things like blooming and haloing a fair bit, which has turned me off from some Mini-LED monitors in the past.  I’m happy to report that this monitor is among the better Mini-LED monitors I’ve tried in this regard.  Bright UI elements on dark backgrounds, Lightroom interface elements, subtitles and HDR video can all make imperfections in local dimming stand out quickly. LG calls it “Hyper Mini-LED”, and whatever the name may be, it’s implemented well.  On paper, it promises OLED-like contrast.

It does a very nice job overall.  While I never expected the “inky black” tones of OLED, this monitor actually gets closer to that OLED level of precision than I had originally hoped it could ever do.  The LG 27GM950B generally does well at minimizing or entirely eliminating blooming for most objects that would show bloom on other monitors.  The mouse cursor, subtitles on a dark screen and some occasional moving elements on dark backgrounds aren’t perfect, but it’s a small complaint.

I am not a spec junkie, in the sense that I am not testing this monitor to a benchmark - I am testing this monitor for my everyday use cases in the real world, from the perspectives of photography, gaming and occasional desktop work.

I also want to mention that over the time I have had this monitor, multiple firmware updates have been released.  After the most recent firmware update, I no longer feel the need to turn off local dimming for desktop work, and that was a big issue during my initial impressions.  Right now as I am writing this, local dimming is on Medium, something I would not have chosen to do a few months back when I first started using this monitor.

Generalized Thoughts

I have used the monitor like I would any other monitor, in a positive way.  I use it for day-to-day “desktop” type work, browsing, photo editing, video games, etc.  My girlfriend has also used it for when she works at home and wants a second, large screen.

I have enjoyed the monitor a lot on the whole.  I does a very good job in all of the use-cases I have talked about above in the introduction.  It used to take some manual setting changes depending on the type of content I am in.

For most desktop work, I used to have HDR off and local dimming off, most of the time, including during photo editing.  That meant that I lose the advantage of the Mini-LED display, but the text looked more present and vibrant with local dimming off.  I recently performed a firmware update - and I am extremely happy to report that text looks noticeably better with local dimming on than it used to.  I wish I had taken a photograph showing the text before the update, it was noticeably less “poppy” and it seems that the algorithm has been tuned to not dim text so much during local dimming.  When the background is dark and the text is bright, it’s still dimmed a bit compared to when local dimming is off. Note: I still keep HDR off when photo editing.

When playing video games, I typically turn HDR on (with some exceptions - I think Hearthstone looks best with it off, for instance).  I usually set local dimming to low or medium.  The 27GM950B does a nice job with local dimming immediately taking the “grey” toned black screens and making them nearly true-black.  Perhaps there’s a way to do this, but I wish I could just set presets based on certain applications or certain types of content to not have to manually change settings, like “when launching World of Warcraft, turn local dimming on” for example.

When doing photography work, I’m usually using Lightroom.  I do turn off the AI Scene Optimizer when doing any sort of work where color accuracy matters, as I have noticed that it can change the brightness and the white balance of the monitor, which isn’t conducive to consistent editing.

I notice that when I’m looking straight on at the monitor, which is probably about 4 or so feet away, the corners do seem to be a bit dimmer than the center of the image with local dimming on, like a small vignette.  It’s not bothersome.  With local dimming off, the monitor is a bit more even in this regard, but you lose some of the benefits of Mini-LED not having local dimming on, especially for video content or video games.

There’s a small controller on the bottom-back side of the monitor to change menu options.  At this point, I’m very used to making manual changes with this controller, mainly to local dimming (my computer can adjust if HDR is on or off with a setting).  I can do it pretty fast, and it’s not a huge bother, but something to be aware of.

You can connect over HDMI, DisplayPort or USB-C.  I typically choose USB-C, as I have a laptop and that keeps it charged.  I do sometimes have issues waking the monitor; more on that below.

Gaming

I’ve been really impressed with how this monitor performs in dark scenes with bright content, and a common time I see this is when I play games on it.  For example, I’ve recently started playing WoW Forever, and have been impressed with how rich the picture looks, running WoW Forever at 5K.  With my computer, I’m able to get ~95 FPS with graphics set to 8, and the monitor responds well.  I have tried to test this on lower graphics settings, and maybe it’s just my eyes, but past about 120Hz, I don’t really notice much of a difference even when I get a higher frame rate on paper.

In my initial review, I did mention that I had seen some blooming around fast moving objects on dark backgrounds, most notably a blooming/halo around the mouse cursor - but that’s an extremely minor gripe, as the monitor performs extremely well with most contrasting content, and I don’t really notice this in normal use, especially in gaming.

I’ve been very impressed by how dark and bright it can get simultaneously, but it comes with the obvious caveat that you need to turn local dimming on for the best effect.

I have noticed that over time, the brightness does seem to dip.  Maybe it’s getting too hot?  I’ve found that sometimes, turning off local dimming and then turning it back on again gets me back to a higher brightness, at least temporarily.

I’ve played around with the dual-mode, as it was an interesting thought to me when I first researched this monitor - drop resolution to increase frame rate.  The thing is, the type of games I typically play really don’t benefit from this.  I’ve mainly played WoW Forever (quite recently), Hearthstone, Maplestory Classic World…not insane graphic powerhouses, not first person shooters.  I have tested the monitor with a few games I thought the frame rate may help with, like Hades II…but as I said above, I didn’t really notice the frame rate above 120Hz, but I did notice lower resolution.  So to me, 5K resolution beats having a higher frame rate, although for people that play FPS games, I bet this is incredibly useful.  There are even some digital crosshairs you can add to the screen, which again, is likely helpful for some.

Mini-LED has been an advantage for me.  If I’m playing a game with many static UI elements like World of Warcraft (it’s been my recent obsession, sorry) - it’s reassuring to know I never have to think about OLED burn in.  The picture quality is incredible considering the trade-off for OLED isn’t an insanely improved image, but can come with the nagging paranoia of burn-in.

Opportunity

While this monitor has been great overall, I’ve identified a couple of areas for improvement with the LG 27GM950B.  The biggest issue I’ve had still does persist after the most recent firmware update, which is that I sometimes have difficulty waking the monitor.  The monitor is not off; sometimes it does work completely normally and as expected.  There are many times where I move my mouse or press a button to wake the computer/monitor, and my login screen shows up for a second and then disappears, for instance.  Even when my laptop is open, I run into some quirks with the display data coming over to the monitor.  I experienced this with the included HDMI cable and the included USB-C cable. This has all improved with a firmware update but still happens occasionally.

I have touched on this above, but is does seem that the brightness level does eventually seem to drop, although sometimes switching local dimming off and on does bump brightness back up - have experienced this with and without AI Scene Optimization.

The included USB-C cable has never achieved 165Hz for me, it seems capped at 144Hz.  Perhaps there’s something else going on here - and as stated above, I don’t really benefit from the super high frame rates in the things I generally do anyway, so this hasn’t really made any difference in my usage.  (The included HDMI cable did hit 165Hz).

Maybe I just don’t get ambient lighting in general, or maybe I just have the monitor too far off of my wall, but with the brightness of the monitor, I hardly notice the ambient lighting option, called “Hexagon Lighting”.  It’s subtle, and maybe that’s the point?  It’s not a gripe, I just didn’t really know where else to put this thought.  I generally turn it off if I’m photo editing.

The brightness of the monitor dropped as I was writing the section above about the included USB-C cable.  I turned off local dimming, turned it back on, and the brightness has been restored.  I’m unsure if it’s overheating, or just making automatic brightness adjustments.

Closing

Overall, I have greatly enjoyed the LG 27GM950B and do recommend it for purchase.  I would highly recommend this monitor to anyone who is looking for these things:
+5K Resolution
+No risk of OLED burn-in
+High (120Hz+) frame rate compared to many 5K Mini-LED monitors on the market
+Reasonable price point compared to some monitors with 5K, 120Hz+ and Mini-LED
+Dual-Mode with lower resolution and higher (up to 330Hz) frame rate

While there are some quirks like occasional brightness loss over time and some issues I’ve encountered while waking the monitor, firmware updates are a thing and hopefully these things do improve even more with time.  It is a very good effort from LG on a high resolution, high frame rate monitor.

After careful consideration with months of usage, I rate the LG 27GM950B an 8/10.  With improvements to some of the quirks I’ve experienced, I could see this monitor being an 8.5 for sure.


r/Monitors • • 1h ago

Discussion Low Priced OLED’s? Worth?

2 Upvotes

I’ve stayed away from OLED monitors because I didn’t think I could find 27” 2k with 165+HZ refresh rate for under $400. I will be using these for 75% work, so I’ll need very clear txt, 25% gaming/tv. Will any of these serve my purpose? Is the pricing too good to believe? I’ll need to purchase 3-5, my workflow calls for 3 minimum.
Please see link below.

https://imgur.com/gallery/crazy-prices-on-monitors-pidLtHe


r/Monitors • • 5h ago

Discussion GTA 6 Aoc Monitor or Samsung Tv

3 Upvotes

Should I play GTA 6 at my setup with my aoc monitor which is 1080p or play laying on my bed on my 4k tv

I know 4k will be better but I prefer playing at my setup

The monitor is 27inch I believe
And the tv is 55 inch it’s a Samsung


r/Monitors • • 10h ago

Discussion Which monitor is a better deal

Thumbnail
gallery
7 Upvotes

210$ 4k miniled ips vs 250$ 1440p oled


r/Monitors • • 20m ago

Discussion Help I don’t know what’s wrong with my setup

1 Upvotes

Hey guys, need some help figuring out what’s causing the flickering shown in the clip. It isn’t constant, but it happens pretty often in darker areas of games and is especially noticeable in Helldivers 2. I also get occasional random flickers during gameplay in other titles, but my desktop and regular browser use are completely fine with zero flicker, so I don’t think the monitor itself is bad.
For context, my setup is a 2026 Razer Blade 18 with an Intel Core Ultra 9 290HX, 64 GB of RAM, and an RTX 5090 laptop GPU. I have the laptop screen disabled and output directly to an Alienware 32” 4K 240Hz QD-OLED (AW3225QF) using an 8K-rated HDMI 2.1 cable so G-Sync stays active.
Is this just typical OLED VRR brightness flicker when frametimes fluctuate in shadows, or is there an NVIDIA/monitor setting I need to adjust? Let me know if capping framerates or switching connection types helped fix this for anyone else with this display.


r/Monitors • • 1h ago

Discussion IIYAMA G-Master Titan Falcon vs Monitor MSI MAG 274QP

1 Upvotes

Hi, I am currently thinking about these 2 displays (I do not really consider other MSI alternative because it is the cheapest due to promo):

Monitor IIYAMA G-Master Titan Falcon GOB2701QSC-B1 27" - 325$
Monitor MSI MAG 274QP QD-OLED X24 26.5" - 475$

Mostly for playing games (PC & Ps5) and programming. I am wondering if text fringing is really that bad on MSI and if the 4th gen OLED on Iiyama is really much better here. Also the True Black 400 Cert. Basically I am just thinking if it's really worth to put additional 150$ into the Iiyama or the MSI will be fine? I am pretty new with oleds so I don't have much hands-on experience with them. Appreciate all the help.


r/Monitors • • 1h ago

Discussion Oled or mini Led? Wanted to upgrade

1 Upvotes

I am using fhd ips now. Wanted to upgrade to oled or mini led for hdr and 10 bit color. So questions :

  1. Is mini led good enough? They look identical to me compared to oled

  2. If i were to go mini led, should i go va or ips?

Thanks


r/Monitors • • 1h ago

Discussion Gigabyte GO27Q24G vs Samsung G50sf OLED

Thumbnail reddit.com
1 Upvotes

r/Monitors • • 1h ago

Discussion Monitor for Mac and PS5 Setup

1 Upvotes

I'm looking for a monitor for my Macbook Pro M1 Max and PS5 Slim setup for around 300€.

I want to do creative work, video editing and content creation and play games like GTA 6 and high fps games like Fortnite or Cod.

Should I get 4K or 1440p?

Which one do you recommend and which specs should it have?

How important are the following specs?

Color accuracy (Delta E / factory calibration) Color gamut (sRGB, DCI-P3, Adobe RGB) Calman Verified / Calman Ready Color uniformity Panel uniformity and backlight bleed Brightness and contrast Gamma accuracy 10-bit color (8-bit + FRC vs true 10-bit) Factory calibration report Hardware calibration support

Which of these matter most for accurate, consistent colors without professional calibration equipment?

Are you using one of these for your Mac & PS5 setup and do you do creative work on it?

ASUS ROG XG27UCS

MSI MAG 274UPF

Gigabyte M27U

LG 27G810A-B

Gigabyte M27UP

Gigabyte G27U

AOC U27G4R

MSI MAG 275UPD E14

Acer Predator XB273KV5

MSI MAG 274UPF E2


r/Monitors • • 2h ago

Discussion Two new monitors, can't decide: 24 or 27, which resolution, two identical or two different? LoL + home office + heavy YouTube/Twitch usage (€300–750 / Germany)

Thumbnail reddit.com
1 Upvotes

Hey guys, i would appreciate your help :)


r/Monitors • • 2h ago

Discussion Problem with monitor

0 Upvotes

Hello everyone, I have a question about my monitor. I have an Iiyama g-master gb2771qsu monitor for around 2 months now if I'm correct but there's a small problem, sometimes the screen goes black for no apart reason and goes back to normal instantly. It doesn't lose power and during that moment nor does it lose the audio if anything is playing. What do you think is causing the problem? I've changed cables from hdmi to display port, I run it at 60hz and I even re-installed the gpu.


r/Monitors • • 2h ago

Discussion First WOLED (42" Samsung S90H) and feeling a bit let down by this pink tint on white screens - is this normal?

Thumbnail gallery
0 Upvotes

r/Monitors • • 2h ago

Discussion 2k QD-OLED vs Tandem WOLED

1 Upvotes

I’m downgrading my setup, I had a 5090 and so I bought the Alienware 4k 240hz monitor, but I since sold the 5090 and want to go to a 2k, 500/540hz monitor. A friend has a very positive review about the Sony inzone 10ms ii which I’m surprised there isn’t a review about. I’m torn between that, or perhaps the MSI model. The MSI model is cheaper but I do hear the tandem WOLED helps with brightness (the sun shines heavily into my room in the morning) as well as some other improvements. The argument against the Sony is… what the hell am I going to get 720 FPS in? It’s also more expensive, but currently on sale. Any recs? (5090 —> 9070 XT. Primarily Deadlock, WoW and single player)


r/Monitors • • 2h ago

Discussion Can someone help recommend a proper monitor for these stats?

Thumbnail reddit.com
1 Upvotes

AMD Ryzen 7
9800X3D - AMD Radeon RX
9070 GRE, 12GB - 32GB DDR5
RAM - 2TB NVMe SSD


r/Monitors • • 9h ago

Discussion Could anybody help me?

Thumbnail
gallery
3 Upvotes

Hi I'm trying to build a budget setup and I can't decide beetween these monitors. My priorities are a solid and esthetically pleasing build and good screen quality in order to be as close as possible to an Oled (l 100hz minimum). The main thing I will use it for is connecting it to my laptop or my ipad pro to it to study and play light games. Feel free to suggest something else if u want to!


r/Monitors • • 3h ago

Discussion Help! Need OLED for GTA on PS5

1 Upvotes

Hey guys, im so new to this, but I have a PS5 and want the best possible picture for GTA 6 and Forza that I play. I want something that uses HDMI 2.1, OLED, and VRR. My budget is $600canadian(420US). Any recommendations please share! Or looking for Black Friday deals? Thanks everyone


r/Monitors • • 7h ago

Discussion My First OLED Choice ?

2 Upvotes

Hey everyone!
I’m trying to choose between these two OLED monitors:
Gigabyte GO27Q24G
ASUS ROG Strix XG27AQDMG
I’ll be using it for both PC gaming and PS5.
My priorities are image quality, HDR performance, brightness, motion clarity and long-term reliability.
For those who own or have tested either monitor, which one would you recommend and why?

Thanks !


r/Monitors • • 4h ago

Discussion Does the Samsung Odyssey OLED G5 G50SF (S27FG500) accept a 4K 60Hz signal over HDMI and downscale to 1440p?

1 Upvotes

Hi everyone,

I’m planning to buy the 27" Samsung Odyssey OLED G5 G50SF (LS27FG500 / 1440p 180Hz QD-OLED) and plan to connect an Android TV Box directly to its HDMI 2.0 port for streaming movies and shows.

Since 1080p doesn't integer-scale cleanly onto a 1440p panel and looks blurry, I want to make sure the monitor has a virtual 4K (3840x2160 @ 60Hz) EDID profile so the TV Box outputs 4K and the monitor downscales it to 1440p.


r/Monitors • • 4h ago

Sale Need help buying new monitor to pair with first PC

1 Upvotes

Hello everyone, I just bought the power spec g765 pc from microcenter and I'm looking to pair it with something powerful. I'm looking for something with a dual resolution switch so I can have both 4k for cinematic things and 1080p for more competitive games. I would also like it to be OLED. I have been doing some research and I couldn't really find anything, any help is greatly appreciated!