r/Modding • • Oct 16 '24

Guide [Guide] Super Mario 3D World Modding with Spotlight

60 Upvotes

My son wanted to try Super Mario game modding after watching all those YouTube videos and I would like to introduce him to the world of game design and modding, hence created this post, hopefully you find it useful too.

Disclaimer: This post is for educational purpose only. It doesn't endorse any linked item. Use it at your own risk.

What you need

Download the latest release of Spotlight and follow the instruction on the github to extract the content along with GL_EditorFramework exactly as shown, but don't run it yet. If you have a Wii U you may dump the game data, or follow this guide to dump from rom, this assumes you already own the game. Do not do this if you don't own the game.

Once you have the ROM file, run Switch-Toolbox to extract the game data. You could use Yuzu to extract the game data too but the extracted data is buried in Yuzu roaming folder, with Switch-Toolbox you can specify where to extract the files. To extract you also need the keys file, which you can download from above link.

Once extracted you can run Spotlight, it will ask to create the initial database, click ok. and then point it to the extracted romfs folder. the editing window should load.

Extract Yuzu emulator.

Now just follow one of the guides on YouTube to start, for example:

https://www.youtube.com/watch?v=ohRWfnZLP6k&t=4s

Specify a separate folder for your mod, and the folder structure should be <mod name>/romfs.

Test on Emulator

Sudachi and Yuzu support running with mods. See below video:
https://www.youtube.com/watch?v=VufFKN3wz-0

If the video got taken down. the steps are: open Sudachi, right click on the game and select Open Mod Data Location, a explorer window will pop up, this is where you put your mods. The folder of your mod is important, it must be <mod name>/romfs/ and inside romfs is StageData and other stuff. So just copy your finished mod folder into this folder. Once done, go back to Sudachi and right click the game and choose properties, you will see your mods listed in add-ons tab. Now to test just start the game.

Test on Switch with CFW

Check how to here:
https://gamebanana.com/tuts/15210

If the page got taken down, the steps are: mount the sd card on your PC by any way you prefer, or ftp over. go to atmosphere/contents. create a folder named exactly as the title id of the game, i.e. for Super Mario 3D World Bowsers Fury is 010028600EBDA000. You may check the tinfoil title page for the game title id. then create a romfs folder inside. i.e.
atmosphere/contents/010028600EBDA000/romfs/

Copy the data from the mod romfs folder to this romfs folder.

For mods with exefs, drag and drop the exefs related folder ONLY in the atmosphere/exefs_patches folder.

Eject the SD safely or close your FTP connection, reboot your console and launch the game.

If you are looking for inspirations for modding or want to contribute, check out gamebanana.

Happy modding!


r/Modding • • 17d ago

Mod Showcase I made a free, open source mod manager: pick a mod, hit play (Thunderstore + Nexus, Windows)

43 Upvotes

Hi, I'm the dev. Modding always meant finding the game folder, installing BepInEx or RED4ext first, following a guide, and hoping nothing breaks. So I built Unalia Mod Manager.

  • - Finds your Steam games by itself (other games: pick the folder once)

  • - One click installs the mod, its dependencies and the loader it needs (BepInEx, UE4SS, RED4ext…)

  • - Turn a mod off, go back to a previous version, or remove everything: the game folder goes back to how it was

  • - Never runs anything from a mod, never overwrites game files, never touches your saves

  • - Changes made while the game is running wait until you close it

  • - Clear warning on games with an anti-cheat

Works today with every Thunderstore game (Silksong, Lethal Company, Valheim…), Cyberpunk 2077, Unreal games on Nexus (Hogwarts Legacy…), and Skyrim SE / Fallout 4 for plugins and loose files. SKSE and FOMOD installers are next.

Nexus works with a free account: the app opens the mod page for the "Mod Manager Download" click Nexus requires, then does the rest.

Free, Open Source, GPL v3, Windows 10/11. It's a beta, so bug reports help a lot.

Download: https://mods.unalia.app

Source: https://github.com/unalia-app/unalia-mod-manager


r/Modding • • Mar 30 '26

Question Found my old handhelds 🥹

Thumbnail
gallery
32 Upvotes

Recently found my old handheld devices and charged them back to life (DS Lite, 3DS, 3DS XL, PSP 3000, PS Vita)

This is my 20th anniversary Pokemon Red & Blue 3DS

I’m definitely looking into modding but don’t know where to start. Currently on a budget because I’m still broke and jobless so any and all recommendations are welcome 😁

I’m also planning on making content around the mods as well


r/Modding • • Apr 24 '20

[PC] Can anyone make this version of Freddy for fnaf?

Post image
32 Upvotes

r/Modding • • Mar 07 '20

Beginner [PC] I found out that in Deep Rock Galactic you can modify the opening credit scene by replacing an mp4 file in the game's directory. I did what had to be done.

31 Upvotes

r/Modding • • Oct 28 '25

News Bully online multi-player it's happening

Post image
29 Upvotes

It's been nearly 20 years since Rockstar Games' Bully came out, and while there's no word of a sequel, the next best thing may have dropped: a mod that introduces online multiplayer to the high school action sim. a group of modders has finally revealed Bully Online. Led by YouTuber, developer, and "massive Bully fan," SWEGTA, the project has been a long time coming, but is inching ever closer to an early-access launch in December 2025 for those who support the team on Ko-Fi. At the time of this writing, it appears the developers have received at least 76 Ko-Fis. According to the YouTube video's description, the mod "allows you and your friends to play minigames, role-play, compete in racing, fend off against NPCs, and much more." SWEGTA described it in greater detail in the nearly nine-minute video below, stating that it's a "mix between minigames, free-roaming, and role-playing." There's a "fully fleshed-out inventory system," letting you earn money in-game to spend on Bully goodies from items to housing to vehicles. It sounds like the online modes of other Rockstar games, such as GTA Online and RDR Online. If you do support the project on Ko-Fi for $8 (either as a one-time donation or a monthly subscription), you get additional perks alongside early access in December. This includes behind-the-scenes content (like developer commentary), a blue player nametag to denote your specialness, an in-game camera to save and share up to 10 photos, priority server queue to get in more quickly, and a Discord role and access to an exclusive text channel to yap with the development team behind the mod.


r/Modding • • May 20 '25

Dorian: interactive dramas hub app mod

28 Upvotes

I've downloaded a LOT of different modded versions of the game from a lot of places because the hearts thing is actually insane, but none of them actually work for me. They just don't give me any hearts. Is this a problem for anyone else and can it be fixed?


r/Modding • • Apr 06 '25

Modding DeskTopMate for dummies

28 Upvotes

IF YOU HAVEN'T DOWNGRADED DTM, PLEASE GO TO MY POST ON THAT FIRST

This was originally written for some friends to help with modding DTM. It's worded so that people who don't have much experience with tech stuff can understand and follow it. Sorry for any grammar mistakes

  1. Go here https://github.com/YusufOzmen01/desktopmate-custom-avatar-loader

  2. Scroll down until you see "Installation" under the big custom avatar loader header

  3. Click the blue highlighted "melon loader" in the first line then click download when the new download window pops up

  4. Go back to the github link and click the blue highlighted microsoft in the next line below the first one you clicked and download that once the window pops up

  5. Open your downloads and find that thing you last downloaded and make sure it's running before opening melon loader from before and clicking run

  6. After a moment a new window SHOULD show up showing a list of steam apps. click desktop mate

  7. Make sure the number under select a version is 0.6.6, DONT click enable nightly builds, and click install

  8. Go back to the github link i sent and click the final blue highlighted words "custom avatar loader.zip" and download it when prompted like normal

  9. Go to your downloads and find the .zip thing you just downloaded and open it

  10. If that annoying rar popup shows up about wanting money just close it and continue

  11. Go to desktop mate's game page in your library on steam and find the cog icon to the right of the green play button.

  12. Go to manage, then click browse local files

  13. Go to the zip file you downloaded

  14. Highlight both of the folders in there and right click them, then copy them

  15. Go back to the browse local files thing and right click on any blank space in there and paste the files

  16. You can close all your download and file tabs if it's getting overwhelming, you won't need them anymore.

  17. Go to steam and open desktop mate (just close it if it's already open and open it again)

  18. IT WILL LOOK LIKE ABSOLUTE HELL THERE WILL BE A LOT OF NUMBERS AND COLORS BUT TRUST ME ON THIS JUST GIVE IT A FEW MINUTES IT MIGHT TAKE A WHILE BUT I SWEAR YOU DIDNT GET A VIRUS I PROMISE JUST GIOVE IT SOME TIME ITS WORKING VERY HARD

  19. After this, the anime character thing should pop up like normal which means everything worked out fine

  20. (YOU WILL NEED AN ACCOUNT ON THIS SITE TO DOWNLOAD MODELS but dont worry you can just put your email in it only takes like 30 seconds) (also any VRM file works even if it's not from this site; this place is just the easiest to find stuff on)

  21. Find a character you want on here https://hub.vroid.com/en

  22. When you click on a character, scroll down a bit and make sure that it says YES that you can use the model. Lots of fun models are disabled for use unfortunately, but there are still many options.

  23. Go ahead and click "Use this model", accept the rules, and download the VRM file

  24. Open desktop mate and click on the character when she shows up, then press F4. It should open up your downloads. (you need to click the character first or it won't show up)

  25. Double click on the VRM file that you downloaded, and your character should change to it. Every time you open desktop mate after this, your last used character will automatically pop up. To change your character, you will have to use the F4 thing

These next things aren't mandatory, but can be helpful.

-If you have several VRM files is open downloads, click once on a file, then right click it and go down to "rename". You can name the file whatever the character's name is for ease of finding it later when you switch between characters and stuff

-If you want the big black box of colorful words to go away when desktop mate is open, go to desktop mate's page on steam, click on the cog icon to the right of the play button, and click properties. Copy and paste "--melonloader.hideconsole" into the launch options box and close the window. Try closing and opening desktop mate again, and the box should only appear when loading up, and should disappear once the character pops up

Thanks for reading, and I hope these helped at least some people. Sorry for anything weirdly written. I probably won't be seeing any comments under here if there are any, as I just made this account to throw these guides out there and dip.


r/Modding • • 18d ago

News Cree un mod de ciclo diario para el juego GUN de pc

27 Upvotes

Diganme que les parece.


r/Modding • • Aug 15 '25

Guide Guide: The Start of Reverse Engineering Games

26 Upvotes

This is going to be a rough guide that doesn't cover everything (that would take several separate posts) but should help get you started in reverse engineering games to mod them. It's a long process. Before you become reversers, you must understand the weight of your Martyrdom. Some games can take as quickly as a few weeks to reverse all that's needed to build in-depth modding tools, some take months or even years.

This is a general guide that covers things I don't see mentioned in a lot of reverse engineering game guides.

I'll cover the major parts:

So to get started with modding, I recommend learning a programming language. That way you can learn coding and understand some things directly relevant to reversing file formats which are data structure design, data types, file creation, file modification, etc. Eventually you'll learn how to operate on the byte or even bit levels of files. I started reverse engineering by learning Python first.

After you have a beginner to intermediate understanding of your chosen language is when I'd suggest diving into reversing. The tools needed to begin reversing a game are typically:

A hex editor, I typically use HxD. I recommend CrystalTile2 or hexecute for Japanese games since most hex editors don't support Shift-Jis character encoding which most Japanese games and visual novels use. This will allow you to view binary files and modify them but also allow you to view them to try and learn the file format.

A memory reader, I like to use cheat engine.

For advanced reverse engineering a disassembler like ghidra, radare2, or IDA is needed though IDA is paid so ghidra is my preferred one.

Now with all that in mind, to actually begin modding a game's files you have to understand the data structure, the compression algorithm used to decompress and compress back for the game to read, and maybe the encryption algorithm if one is used. Some games detect modification of their files and if they do, you have to patch the executable to bypass modification detection.

Most games store files within larger files called a container or archive file. You will need to learn how to extract the files and either repack, rebuild, or inject/append the files. If you become an advanced reverser, you can even modify the executable to load the game's files in a loose format instead of having to read from containers/archive files. If the game uses loose files then you need to learn the data structure of the particular file you want to mod.

That is how most modding tools are made, the reverse engineer/programmer will examine the file they want to build tools for and learn how the data is stored and read. When you understand how a file stores and reads say, data to character parameters, you can then build a GUI file modding tool that modifies that file with a user interface that is for the end user. They may also examine the executable especially to view the assembly or disassembled code to get a rough idea of how things were written, stored, calculated, etc.

That's just one way though, some programmers prefer to convert a binary file into a more user friendly moddable file such as a xml file. I personally prefer building my GUI editors to modify the binary file instead of creating additional files to convert to and back from.

Handling Byte Alignment and Padding:

One thing that trips up a lot of new reversers is byte alignment which basically, some game files require data to be "aligned" to specific byte boundaries, like starting every chunk of data at a multiple of 16 bytes. Why? It's often for performance reasons on hardware or to match file system sectors (like 2048 bytes on CDs/DVDs for older consoles). If your modded data isn't aligned properly, the game might skip over it, read garbage, or crash entirely.

How do you spot alignment in a file? Open it in your hex editor and look for patterns. Sections often end with padding bytes (usually 00s) to reach the next boundary. For example, if a header says a data block is 100 bytes long but the next one starts at offset 112, that's likely 12 bytes of padding to hit a 16-byte alignment (100 % 16 = 4, so pad 12 more to reach 112). You can also check the game's executable in Ghidra for assembly code that does bitwise operations (like AND with 0xF for 16-byte checks) or loops that skip to aligned addresses.

When modding, you'll need to add padding to your modified data so it aligns correctly when you inject or append it.

You don't need to learn a programming language to do some forms of modding but for file modding, especially games that have no existing mods/modding community it would be a huge help to understand programming.

Some tips for reversing games or files in general:

Once you know the file format, you have to learn what compression algorithm was used. There are many ways to do this but quick ways are array of byte or string searching the executable, files, or in memory. For example, a common compression algorithm used in game development is Deflate and that's typically used from a library like ZLIB. Often times when ZLIB is used each compressed file has a header (though you can use ZLIB without headers for compressing) that is recognizable, usually starting with a 2 byte marker that specifies the compression level like one example is "78 DA" (a compression level).

Another commonly used one is GZIP, that always starts with a searchable header which is "1F 8B". But let's assume you don't know what compression algorithm is used right away, no byte searching is helping. Try string searching the names of the compression algorithm or the developers of the algorithm. For example in headerless ZLIB cases, you could try searching "Mark Adler", "Jean-loup", "ZLIB", "Deflate", "Inflate", etc.

The same applies to other compression algorithms like LZMA. You can string search things like "Lempel–Ziv–Markov", "Abraham Lempel", "Jacob Ziv", "LZMA", etc. The same applies to figuring out encryption algorithms used, a lot of the times if a developer uses libraries not their own they must credit the original creator and that is quite helpful for detecting as a reverse engineer.

Situations where string searching the author of the algorithms name may be less helpful is if the game developers designed the compression algorithm themselves instead of using libraries that aren't theirs.

If encryption is used on the container/archive files and you don't know the algorithm used but know some details like say a sentence in the game such as "Press X to start" which is 16 bytes long, you could try encrypting that sentence with various encryption algorithms and then search the encrypted array of bytes from those various algorithms across the game's container/archive file. You may end up finding a match, you may not if the game uses a salt with the encryption key but it is one of the many ways to identifying an Encryption algorithm used. To clarify though, there are many encryption algorithms and not all of them are limited to 16 bytes/128 bits for encrypting, I was just giving a basic example.

For translating games into other languages, I highly recommend end of file translating. Essentially, you find the pointer offsets to text or base values that go through a math formula to calculate the actual offset to text data and change them to the end of the file. When you translate in the original file position, you have to shift data and update offsets if the translation becomes longer than the original text. That can be a long and unpleasant situation especially in massive files, so End of file translating is preferable.

End of file translating changes where the game looks for the text and by having it at the end of the file, you don't have to shift data and you have no size limit to the text length unless the game has a specified file size for the file in question but even then you can still modify that to the new current size. Though, you will likely have to modify fonts and text size when your translation is larger than the original line and account for possible character encoding that your language may use that the game may not read by default.

Mod injection at the end of the file works in a similar way, a really good way to building mod managers without disrupting the original file structure too much and without mass data shifting is to append mods at the end of container/archive files and update the offsets to the current position of the modded file. The original files are unmodified within the container/archive file, the game simply changes to read at the current position specified. I did this in Conception 2 and Conception Plus' case, my mod managers append mods to the end of the container files rather than placing them back in the original positions they were stored at in the base game.

In cases of PS2 game modding, it's essential to check if bit shifting for calculations is needed. For example, Bully's PS2 version requires bit shifting offsets to the left by 11 to get the actual offset to file data, a lot of PS2 games do that. I know another game I reversed called Samurai Warriors 2 did the same, requiring left bit shifting to get correct file data offsets. You see this in IMG containers used for the PS2 version of Bully, the DIR metadata file specifies metadata for files stored within the IMG container and file offset was one of them but it's only base values for offsets, the correct offsets to each file's data was calculated by base << 11 which is base value bit shifted to the left by 11.

Always remember the endianness used for the game you seek to mod. For PS2, it uses little endian but for PS3 or Xbox 360 it's big endian. For PC it varies, I've seen PC games using either one.

This was a lengthy post but I hope it helps in beginning your reversing journey. A big inspiration for me that helped me in my reversing journey is Heilos from the State of Decay 2 modding community.


r/Modding • • Jan 27 '26

Mod Showcase I have started developing a mod for branching and tapering trees in Vintage Story

Thumbnail gallery
25 Upvotes

r/Modding • • Oct 15 '25

Modded old Nokia to have USB c with a vape pen

Thumbnail
gallery
24 Upvotes

I modded this old Nokia to have USB c with a used rechargeable vape pen I don't smoke but I live with people that do so I have lots of vapes around the house most of them are empty so I gut them sometimes for projects also "added" mini sim support but it's just a simple 3d print with glue because who actually uses regular old sim


r/Modding • • 3d ago

Mods

Post image
23 Upvotes

Waste of parent's money


r/Modding • • Dec 26 '24

how do i mod marvel rivals

23 Upvotes

hi guys, im interested in createing my own skins for marver rivals so my question is, there is a video or something that shows you how to mod the game?


r/Modding • • 18d ago

PC Modding Tools 100% Free. Supports WWE 2k19,20,22,23,24,25 and 26. | 2k19 to 2k26 Animation Converter Included.

19 Upvotes

**TL;DR:** Free tools for modding WWE 2K19 through 2K26 (PC only for now). All downloads - source and compiled - are on https://github.com/davegranlet/davegranlet

## What is Aurora Forge NT100 (100% Not Tribute)?

It is my answer to being told that my money and opinion didn't mean s**t to the developers of other modding tools.

People (myself included) have poured years of subscription money into tools that then punish them for a single missed payment: features that were already downloaded get deliberately locked, multi-file extraction gets cut down to one file at a time, and years of continuous support suddenly mean nothing.

I was working on my stupid prompt builders, not bugging anyone, when I needed a fresh extraction. I loaded up CakeView and... wtf, multi-file extraction is a Patreon feature? I asked about it and was told "Meh." So yeah, nah.

The answer became obvious: build the free alternative and automate the entire pipeline so those gates stop mattering. Every format I map, every offset I solve, and every workflow I automate is one less gate anyone can use to squeeze the community.

The goal is a full toolkit that is free, complete, and stays complete.

## Who am I?

I have been modding since the early PC wrestling days. My roots are the original MDickie modding scene, where I wrote the first PC wrestling game mod for an MDickie title. I code across just about every stack imaginable, from low-level Assembly to high-level automation pipelines. If a computer speaks it, I have built with it.

My philosophy: tear down the barriers to asset extraction. I do not believe in paywalling downloaded software, cutting off features, or exploiting creators. Every time I automate a tool or crack a new file format, it is one less gate anyone can use to squeeze the community.

Active projects: automating the complete PC and console wrestling game asset pipelines, and multi-file parallel extraction tools with zero feature gates. Outside the dev environment my time goes into wrestling, MMA, and deep strategy gaming.

One note: I am pretty chill, but if I come across as blunt or quiet during active dev hours, that is just deep focus in the structural math - it is not personal.

I am taking the scene back. Let's build.

## What's in 2.1 Beta 4?

- Free: no Patreon requirement, Discord role check, access gate, or in-app verifier.

- Full 2K19 to 2K20 / 2K22 / 2K23 / 2K24 / 2K25 / 2K26 animation conversion matrix.

- CAK Foundry, Entry Studio, Audio Studio, PAC19, CAK20, DDS, Character Viewer, Mod Suite, loaders, and the full tool/source library.

- Public source downloads for the main app, each major tool, each loader, and the one-off utilities.

- Windows short-path fix: extract/copy no longer hits the path limit.

- Tools are 100% compatible with Tribute's BakeMe folders.

- Plugin coverage and support for all PWM/Tribute plugins is coming.

- Tutorials are coming, but the app is very easy to use.

## Patreon

While we are 100% free, we do have Patreon subscriptions for those who want to contribute. These subs provide the funds required to further rip apart the WWE game world.

Major releases such as today's release are 100% free, but any further updates and fixes are Patreon-only until our next major release.

No subscription is required to use 2.1 Beta 4. Test mod output in game and keep a rollback.


r/Modding • • Jun 13 '26

Question How do I make a custom map for Meccha Chameleon? (How to make Steam Workshop content?)

19 Upvotes

This new game just game out called Meccha Chameleon. It’s basically hide and seek but you paint your body to blend with the environment.

Theres a steam workshop page where you can play community created maps, and I wanna know how to make one myself. I don’t know anything about making steam workshop content, but if someone can just point me in the right direction and tell me what to do to even start, I can figure it out.

I just need to know where to go to start making a map of my own for a steam workshop mod, and how to upload it once complete.


r/Modding • • Dec 30 '24

How to start modding MiSide? Complete beginner, but I want to learn!

19 Upvotes

Hello, community!

I’m an absolute beginner when it comes to modding and I want to start with the game MiSide. I have some basic knowledge of programming, but I’ve never dealt with modding or Unity before. I want to understand how to modify this particular game and where to start.

I want to add new features and objects to the game.

Example: make it possible to interact with objects, add animations, and change some mechanics (such as NPC interactions).

What tools do I need, how can I figure out which scripts or mechanics are responsible for the functions I need, and where can I find basic guides/resources to understand the modding process for Unity games with IL2CPP?

I’d appreciate any advice or links to appropriate tutorials! Please explain as simply as possible—I’m a total beginner in modding and I don’t want to give up.

Thanks in advance for your help!


r/Modding • • May 30 '26

Question Character AI Mod APK?

Thumbnail reddit.com
18 Upvotes

r/Modding • • Apr 14 '25

Alien: Isolation – Echo Protocol – A Multiplayer Co-Op Mod

18 Upvotes

Alien: Isolation – Echo Protocol – A Multiplayer Co-Op Mod

Hello, everyone! We’re starting a fan-made multiplayer mod for Alien: Isolation, called Echo Protocol. This mod will allow two players to team up for a unique co-op experience, where one player controls Amanda Ripley as she tries to survive Sevastopol Station, and the other manipulates the station’s security systems, doors, and cameras to assist or potentially sabotage the first player. If you’re interested in helping with programming, art, design, or testing, we’d love to have you join the project! This is a community-driven effort, and we’re looking for passionate people who are ready to bring this idea to life. Let me know if you’re interested in contributing, or feel free to share your thoughts or ideas!

Edit:

"I’m not a coder or artist, but I’m passionate about this project and I’m here to help make it happen. My main strength is vision and leadership — I can keep the project on track, help organize the team, and make sure everyone’s ideas align with the core goal of creating a fun, cooperative multiplayer mod for Alien: Isolation. I’m all about rallying the right people together and getting this project off the ground.I don't have funds to offer, but I’m fully committed to managing the team, communicating ideas, and making sure we stay motivated to see this through. If you want to join the project, we’re building a community of people who are as passionate as I am about getting this mod out there!"

Feel free to join my discord link in bio

Thanks!


r/Modding • • Jan 07 '24

Console Mod The prophecy has been fulfilled

18 Upvotes

r/Modding • • May 01 '23

PS5 Watercooling Mod

Post image
18 Upvotes

Hey i successfully modded the Ps5 with a cheep watercooling kit. Everything works fine and the final build looks quiet cool.

If you have questions feel free to ask


r/Modding • • Sep 30 '26

Discussion New open-source project tries to let Claude Code mod almost any PC game you own: universal-modder

17 Upvotes

universal-modder (MIT licensed) launched today. It's a Claude Code plugin that identifies a game's engine, reads the real code, builds the mod, generates sprites/3D/audio with fal, tests it in the running game, and cuts a showcase video.

The author's examples: a Terraria mod with a tactical nuke and a custom boss, and a new Age of Empires II civilization with a Robotaxi unit.

Limits: it only targets games you own, single-player/offline. It refuses to bypass anti-cheat or write multiplayer cheats, and it doesn't ship game files.

Caveats: Claude Code is paid and asset generation needs a fal API key. Forks for opencode and Antigravity already exist. It's brand new, so results are still unverified by the community.

Repo: https://github.com/rehan-remade/universal-modder

(I'm not the author, just sharing.) Has anyone tried it?


r/Modding • • Sep 09 '26

Mod Showcase What if you could play Spore with a friend? A first look at my multiplayer co-op mod

17 Upvotes

https://youtu.be/dM98_O6MfTk

I'm working on a multiplayer co-op mod for Spore, with the goal of letting several players explore and evolve together, each controlling their own creature.

The current focus is making the Creature Stage fully playable in co-op. The prototype already lets players explore, eat and fight together. There's still work to do on synchronization, interactions and creature editing.

I plan to bring co-op to the other stages too, once the Creature Stage is in good shape, and expand testing to more players.

What would you most like to do together in Spore?


r/Modding • • Aug 20 '24

Discussion Can we revive F.E.A.R modding?

17 Upvotes

I know there isn't much documentation for the tools, but here's all the info and tools I could pull together.

FEAR Public Tools v2 file - F.E.A.R. - ModDB (The modding tools)

https://youtube.com/playlist?list=PLE_yJhRzcviuuQvv5pzDxoJCdk83uq5Bd&si=-jsL_GHDBIyLnHVT (a playlist of editor tutorials)

Tutorials - F.E.A.R. - ModDB (What little tutorials there are on MODDB. Recently, u/Archer_Jr added a tutorial on animated textures. Check it out!)

FEAR Mapping: WorldEdit Setup (youtube.com) (A playlist containing 18 videos on how to make maps)

F.E.A.R. SDK [First Encounter Assault Recon] [Modding Tools] (gamebanana.com) (Older SDK version)

Arche Noah [First Encounter Assault Recon] [Modding Tools] (gamebanana.com) (A file explorer for F.E.A.R's archives)

Discord (A Lithtech ((the game engine)) discord server)

GitHub - Five-Damned-Dollarz/io_scene_jupex: Blender addon for importing Lithtech Jupiter EX maps (The name explains it all)

I can't find anything else, but for some examples of custom campaigns that were made with the tools, check these out:

Clone Crisis mod for F.E.A.R. - ModDB

Masada mod for F.E.A.R. - ModDB

Chambers mod for F.E.A.R. - ModDB

F.E.A.R. Resurrection mod - ModDB (Apparently this one is REALLY good, but it's unfinished.)

I would LOVE if we could pull together and make a full documentation for this game, because the documentation is almost non-existent. Though, I don't know much about Lithtech, seeing as I didn't read or watch the guides. I'll try to learn though, now that these are all compiled into one place. (but not really)