Made replacement inner spoiler covers for my Evo 9, since OEM ones are basically unobtainable
Hey everyone,
A quick project I wanted to share. If you've ever looked closely at an Evo 9 rear wing, you know the inner sides of the uprights have plastic covers. On a lot of cars those are cracked, half missing or gone completely, and finding replacements is pretty much hopeless. Either they're discontinued or the price is ridiculous for a piece of plastic.
So I designed my own.
What I did:
- Modeled them to match the contour and curvature of the uprights, so they sit flush like the originals
- Added locating pins on the back so they line up in the same spot every time
- Printed them in ASA, because it holds up to UV and weather a lot better than PLA or PETG.
Mounting:
I used 3M Dual Lock (the mushroom-style "velcro") so the covers can come off if needed. On top of that I'd still recommend double-sided tape, just like the factory did. Clean everything with isopropyl alcohol first and don't do it in the cold, or the adhesive won't bond properly.
Finish:
They come out of the printer black with a slight texture. You can leave them like that or sand, prime and paint them to match the car.
Pics are attached: the finished covers, the back with the pins and Dual Lock, and the covers mounted on the wing.
I'm curious whether anyone else has dealt with missing covers and what you did about it. Have you found any OEM sources that still have them? And if you run a different wing setup, would something like this be useful at all?
If anyone wants a set, feel free to DM me. I make these myself, so I'm happy to answer any questions about fit or install.