r/MiniPCs • • 6h ago

Beelink GTR5 (5900HX) tuned + RTX 2060 eGPU

Thumbnail
gallery
15 Upvotes

Sharing since there isn't much out there on pushing the GTR5. Was given an RTX 2060 by a friend, and figured I should put it to good use.

Aint a pretty setup, but it really opened up some performance and now works for 4K 60 fps gaming (older, lighter games) and 3d modelling work.

Setup: GTR5, 5900HX, 32GB DDR4-3200, RTX 2060 on an open OCuLink dock via an M.2 adapter in the NVMe slot. Cut a hole in the case to route the OcuLink out.

CPU

  • UXTU at 45W sustained / 54W boost (stock is 35W), Curve Optimizer -15. Anything lower crashed in single core.

  • Repasted. Old paste was dry and flaky. Temps dropped 6 to 9°C.

eGPU

  • Hung at boot until I disabled the clock power saving on the M.2 slot. Saving anything in the BIOS menu gave me a no-POST, so I had to write the settings from a UEFI shell with setup_var.

Results

TestBeforeAfter
Cinebench 2026 multi2,4752,819
Geekbench 7 single / multin/a1,865 / 9,730
Time Spy1,560 (iGPU)8,188 (RTX 2060)

Geekbench multi is about 12% over the average 5900HX.

Next up is a 120W brick to try 50W sustained, though the CPU's already close to its current limit.


r/MiniPCs • • 9h ago

Would you recommend either of these to hook up to a Razer Core X V2 with a 5080?

Thumbnail
gallery
5 Upvotes

Need some advice. Thanks :)


r/MiniPCs • • 19h ago

Passive cooling mod example

Post image
29 Upvotes

Old CPU cooler attached to AMLogic S905W2 Quad Core android TV box motherboard. With stock cooler (piece of steel sheet) the box runs too hot and I had to do something about it.

Probably posting in wrong subreddit. But some smaller mini PC motherboards are not much different from tv box mobos and same technique may apply.


r/MiniPCs • • 11h ago

General Question Affordable mini pcs for light gaming

5 Upvotes

Hi, I'm new to tech completely, so I don't know much about specs or tech related things.

I was thinking on buying a mini pc that can run light games such as valorant, cs2, or LoL at 120 fps. I don't really mind the storage; 16g ddr4 is fine.

My budget is $400-500. I already have a monitor and setup, I just need a mini pc. Could I get please get some reccomendations for any mini pcs that fit my wants? Thx :)


r/MiniPCs • • 12h ago

Tiny but mighty

Thumbnail gallery
6 Upvotes

r/MiniPCs • • 9h ago

Recommendations Which Mini PC / Desktop for Channels DVR server?

3 Upvotes

I am looking to upgrade my current desktop that I'm using as a server for Channels DVR. It works fine at home, but I cannot connect remotely so it's time for an upgrade. I've read that Channels recommends the N series for quick sync. I've come across computers with N95 and N150 starting in the $300 range. This is more than I am wanting to spend, but I can up my budget if I can find something that will last many years, but I understand things happen and anything can fail over time. That being said, I'd like to stick to the more familiar names as I've read many comments about some of the lesser known brands failing within 1-2 years and warranties not being honored.

  • It will strictly be used as a server and be on 24/7 so low power consumption is something that will be considered.

  • I need something that will run smoothly when accessed remotely. I am currently using a HDHomerun as a tuner with Channels DVR app.

  • I will not be using it to store large movie files. Mainly recording shows and deleting them once watched. I believe a 512gb should be more than enough for my needs.

  • I would like to find something practical that can be mounted in a drawer or behind a TV, but not a deal breaker. I will consider a SFF as an option as well.

I'm not as knowledgeable as I'd like to be when it comes to computers/servers, but I'm learning as I go. My understanding is that most of the Intel computers have quick sync. Is there a specific year generation I should be looking at? I see a lot of comments about the 12th gen Alder Lake processor being one of the better ones?

I've come across several options on eBay, but I'm not sure if they are good options or if the prices are fair so I'd appreciate some input.

First option is a Acer Aspire with N150 eBay XC-1715 There is a coupon for $50 off that expires today. I did notice they raised the price today by $20 as is was $199.99 yesterday with coupon.

Second option is a ASUS NUC14 eBay NUC14 again with the N150 processor. I like the size of this one, but I've read several post stating a black screen issue due to memory issues?

Third option would be to pick something with a processer capable of more than the N series like a HP, Lenovo, Dell Optiplex with 10th gen Intel. Here are a few options I came across on eBay.

HP 800 G6

HP 400 G6

Dell Optiplex 3090

Lenovo M70q

Any help would be greatly appreciated. If anyone has a better option with links that would be very helpful. Also, if the third option is best what generation should I start with? Is 7th, 8th etc too old? Thanks everyone!


r/MiniPCs • • 11h ago

General Question One box to replace streamer, Plex server and home AI: is the HP ProDesk 4 Mini G1i up to it? or am I missing something?

4 Upvotes

Hi all,

I’m planning a single always-on mini-PC for the living room in order to watch movies, stream, and also use AI.

I asked AI for assistance since I have zero knowledge of that sort but would appreciate your wisdom.

What I need it to do:

  • Connect to the TV over HDMI and be the only streaming device (no Shield/Apple TV)

  • Run Plex Media Server, and play back locally with Plex HTPC (or Kodi if needed)

  • Library is ~2TB of movies and growing

  • Send lossless audio (TrueHD / Atmos / DTS-HD MA) to a soundbar, either through the TV’s eARC or the soundbar’s HDMI input

  • Run the Claude desktop app or other AI, 24/7 with access to local folders. As far as I know this needs Hyper-V, so I’ll be on Windows 11 Pro

  • Be quiet enough not to notice in a living room, with low idle power draw

Proposed setup:

  • HP ProDesk 4 Mini G1i: Intel Core Ultra 5 225T (35W), 16GB DDR5 (single stick), 512GB NVMe, no OS (installing my own Windows 11 Pro)

  • WD Elements Portable 5TB (USB) for the media library, no backup drive

  • Logitech K400 Plus for couch control

Questions:

  1. Has anyone used the ProDesk 4 Mini G1i (or a similar T-series business mini PC)? How noisy is it at idle and during 4K playback?

  2. On current Intel graphics under Windows, does HDR10 plus TrueHD/Atmos passthrough work reliably in Plex HTPC? Any audio dropouts with 23.976fps content?

  3. Is 16GB single-channel fine for this workload, or is adding a second stick for dual-channel worth it?

  4. Any issues running a portable USB HDD 24/7 as the library drive (sleep/spin-down, disconnects)?

  5. Tips for keeping Windows stable as an always-on box (updates, auto-login, auto-start apps)?

  6. I know Dolby Vision isn’t really possible on Windows. Is HDR10 fallback good enough in practice?

  7. Would you pick something else in the same class instead, like a Lenovo ThinkCentre M70q Gen 6 or Dell Pro Micro? Why?

Thanks in advance


r/MiniPCs • • 7h ago

Just bought a used Bosgame P3 Mix Mini PC from Amazon UK

2 Upvotes

Will end up giving a review next week when it turns up, but love to hear people's views in the meantime.


r/MiniPCs • • 4h ago

Recommendations Most secure mini PC?

1 Upvotes

Mini PCs on a budget, I should say. How can they be made secure/private?


r/MiniPCs • • 8h ago

Can I power a Beelink BT3 Pro using a 100W USB-C PD charger and a 12V PD trigger cable, but only if the charger supports a 12V profile? I would also verify the barrel-plug polarity and current rating first.

2 Upvotes

Can I power a Beelink BT3 Pro using a 100W USB-C PD charger and a 12V PD trigger cable, but only if the charger supports a 12V profile? I would also verify the barrel-plug polarity and current rating first.


r/MiniPCs • • 6h ago

Mini-ITX SO-DIMM 5 vs Minisforum NAD9 vs alternative build?

Thumbnail reddit.com
0 Upvotes

r/MiniPCs • • 7h ago

Gaming PC for my 7 year old

Thumbnail reddit.com
1 Upvotes

r/MiniPCs • • 1d ago

m720q without extra PSU for 4xHDD

Thumbnail
gallery
56 Upvotes

I was wondering why so many people use a separate PSU to power their HDDs. The PCIe slot is rated for around 60(?) watts, most of which should be available on the 12V rail. I'm not sure how much power the 5V rail can actually provide, though.

If you're planning to use only 2.5" drives, which run entirely on 5V, you'll need to test how much power the 5V rail can actually handle. I've only tested this setup with 3.5" drives.

On top of that, I wanted 2.5GbE networking as well.

And that's how this little hack was born.


r/MiniPCs • • 20h ago

General Question weirdest performance bug with hp elitedesk 705 g4 dm mini, anyone ever had it?

Post image
3 Upvotes

r/MiniPCs • • 19h ago

General Question Mini pc vs itx??

2 Upvotes

Questions for some of you , specially those with egpu setups.

Why did you buy a mini pc over say building a itx set up?

Am really unsure how to word my situation
I own a em780 love the form form factor, but doesn’t have the ooomph

I also have a itx set up but the motherboard (minisforum bd790i) having some issiues

So I thought about grabbing a mini pc

Use the 64gb so dim from my mini forum throw it in the mini pc then buying a oculink egpu dock for the 5060 ti

I really want your take on why you got a mini pc over itx


r/MiniPCs • • 1d ago

Trying to get to the fan on ancient Intel NUC

Thumbnail
gallery
20 Upvotes

My problem is the audio connector which sticks out a bit and because of it I can't slide the case out. Anybody know how to get around that?


r/MiniPCs • • 1d ago

SOYO S4 Plus (Ryzen 7 H255 / 780M / 24GB LPDDR5): Tear-down, PTM7950 & Gelid Extreme mod, SSD comparison, and fixing the 780M BIOS bottleneck

Thumbnail
gallery
31 Upvotes

More photos:

https://imgur.com/a/Jgvf0tu

Hi everyone,
I am new to the Mini PC world and recently bought the SOYO S4 Plus (AMD Ryzen 7 H255, Radeon 780M, 24 GB LPDDR5). I took it apart, cleaned up the cooling, benchmarked the hardware, and resolved the well-known iGPU performance issue. Here is a summary of what I found, what I modified, and how it performs.

1. Hardware Teardown & Thermal Mods

When opening the unit, the factory thermal job was pretty messy:

  • Thermal paste: Excessive amount of cheap paste flooded all over the APU die and surrounding capacitors.

  • Thermal pads: Factory pads on the power delivery area were oversized and overlapping each other.

  • Modifications done:

    • Cleaned the APU and applied Honeywell PTM7950

    • Measured original pad thickness and replaced them with soft Gelid GP-Extreme pads:

      • 1.0 mm on the R15 chokes/inductors.

      • 2.0 mm on the MOSFET / DrMOS power stages.

Storage (Stock Wuxin vs. Lexar NM620):

  • Stock SSD: The factory drive is a generic Chinese WUXIN N5 512GB NVMe SSD. CrystalDiskMark showed around 2378 MB/s Read and 1688 MB/s Write (sequential Q8T1). Surprisingly, the drive came with zero thermal pads from the factory.

  • Second SSD added: I installed a Lexar NM620 512GB in the second M.2 slot. It performs at 3549 MB/s Read and 2846 MB/s Write (Sequential Q8T1).

  • Thermal pads added to SSDs:

    • 3.0 mm Gelid Extreme on the flat Wuxin drive.

    • 2.0 mm Gelid Extreme on the Lexar (because its PCB has uneven component heights / hills and valleys).

2. The 780M BIOS Issue & Fix

  • Factory BIOS (BI0004A, dated 03/02/2026):

    • Out of the box, the Radeon 780M scored only 1,169 in 3DMark Time Spy Graphics.

    • Why did the old BIOS strangle the iGPU? HWiNFO monitoring showed that the GPU core clock was actually running at its rated 2600 MHz. The bottleneck was memory latency and interconnect throttling: memory latency in AIDA64 was as high as 132.7 ns, and active DRAM bandwidth under load was restricted to just 13.75 GB/s.

  • New BIOS (BI0201, dated 09/07/2026):

    • Flashed via UEFI Shell (Flash.nsh with NVRAM reset and boot block update).

    • Without changing any drivers, Time Spy Graphics jumped to 2,778 (+137.6%).

    • AIDA64 memory latency dropped from 132.7 ns to 110.8 ns (-16.5%), copy speed increased from 57.2 to 66.6 GB/s (+16.5%), and DRAM throughput under load rose to 29.27 GB/s.

  • Clean Windows 11 & AMD Chipset Drivers:

    • Did a fresh Windows 11 Pro install, installed the AMD Chipset Driver 8.09.28.1124, and updated to AMD Adrenalin 26.10.2 (using Ryzen 7 8840HS as the reference).

    • Time Spy Graphics reached 2,890 – 2,990 points.

    • Cinebench R23 Multi-Core reached 15,481 – 15,993 points.

3. The 24 GB LPDDR5 RAM Confusion: What is Actually Under the Hood?

There has been huge confusion regarding the RAM configuration in this mini PC:

  • What software and BIOS report:

    • Windows / SMBIOS / CPU-Z report: 4 logical modules of 6 GiB each ("4 x 32-bit", Quad Channel LPDDR5-6400).

    • ZenTimings / MemTest86 report the chip manufacturer as Samsung K3LK7K70BM-BGCP.

  • Why this didn't make sense from the start:

    • The part number K3LK7K70BM-BGCP is a 64 Gbit (8 GB) Samsung chip. Four physical 8 GB chips would mean 32 GB, not 24 GB. Moreover, 6 GB discrete LPDDR5 packages do not exist.

  • What is actually soldered on the board:

    • Inspecting the motherboard markings reveals 2 physical BGA chips: SK hynix H58GG6AK8H-X094.

    • Chip specification:

      • Manufacturer: SK hynix (D1a process node).

      • Type: LPDDR5X.

      • Density: 96 Gbit = 12 GB per chip.

      • Configuration: Exactly 2 physical chips x 12 GB = 24 GB total.

      • Bus width: 128-bit total (2 x 64-bit).

      • Catalog speed rating: Listed as up to 8533 MT/s (running at 6400 MT/s in SOYO BIOS).

    • Takeaway: The SOYO BIOS has hardcoded dummy SMBIOS/SPD tables pointing to a non-existent Samsung 4x6GB layout, while the real hardware is two 12GB SK hynix LPDDR5X chips.

4. Thermal Paste vs. PTM7950 Tests (Hwinfo logs to .CSV)

Ambient temperature was controlled at 21°C for all runs.

Cinebench R23 Multi (Stock Paste vs. PTM7950 Run 3):

  • Score: 15,993 pts (Stock) vs. 16,016 pts (PTM7950) -> +0.14% (identical).

  • Average CPU Temp (Tctl/Tdie): 82.44°C (Stock) -> 78.17°C (PTM7950) -> -4.27°C drop.

  • Peak CPU Temp: 85.1°C (Stock) -> 83.9°C (PTM7950) -> -1.2°C drop.

  • CPU Package Power: Sustained 53.89 W vs. 54.22 W.

  • Summary: The CPU is power-limited to ~54W, so score stays the same, but the core runs significantly cooler with more thermal headroom.

3DMark: Stock Paste vs. PTM7950 (Run 1):

  • Time Spy:

    • Overall: 3,323 -> 3,336 (+0.39%).

    • Graphics Score: 2,981 -> 2,993 (+0.40%).

    • Average CPU Temp: 74.07°C -> 70.00°C (-4.07°C).

    • Average GPU Temp: 73.22°C -> 69.54°C (-3.68°C).

  • Fire Strike:

    • Overall: 7,747 -> 7,798 (+0.66%).

    • Graphics Score: 8,309 -> 8,377 (+0.82%).

    • Average CPU Temp: 74.73°C -> 70.21°C (-4.52°C).

    • Average GPU Temp: 74.00°C -> 69.62°C (-4.38°C).

5. Productivity vs. Games Setting (AMD Memory Optimizer)

In AMD Adrenalin software, switching between Productivity and Games mode changes the VRAM allocation:

  • Productivity mode: Hardware reserved VRAM is set to 725 MB (leaving 23.3 GB for the OS).

  • Games mode: Hardware reserved VRAM is set to ~4.2 GB (leaving 19.8 GB for the OS).

  • Performance difference:

    • Time Spy Graphics: 2881 pts avg (Productivity) vs. 2985.5 pts avg (Games) -> +3.63% advantage for Games mode.

    • Fire Strike Graphics: 8126 pts (Productivity) vs. 8309 pts (Games) -> +2.25% advantage for Games mode.

Hope this helps anyone picking up one of these units! If you buy one, flash BIOS BI0201 immediately, consider repasting with PTM7950, and don't forget to put a thermal pad on the stock M.2 SSD

Edit:

Despite needing a BIOS flash, a repaste, and SSD pads, I am very happy with the performance and noise levels.For 1500 PLN/~$370 / €350, you get an 8-core Zen 4 CPU, 24 GB LPDDR5X RAM, and a full 3000-point Radeon 780M. Most big-brand Mini PCs with these specs cost $500+ / €500+.


r/MiniPCs • • 1d ago

General Question will the wavlink ax210 wifi 6e card work in a lenovo thinkcentre m70q gen 3 on linux mint?

Thumbnail
gallery
4 Upvotes

hi everyone

i have a lenovo thinkcentre m70q gen 3 (11t4) with an i5 12400t and 16gb ram and a 256gb nvme running linux mint

it came without a wifi card and i dont see any antenna ports so right now i only use a lan cable

i want to add a wavlink wifi 6e card with the intel ax210 chip (m.2 2230 key e) for wifi and bluetooth

my questions

will this card fit and work in the wlan slot of the m70q gen 3

does the bios block unknown wifi cards

is the ax210 the best wifi card for a mini pc like this or is there a better one

how do i find antennas and wires that work with wifi 6 or 6e since the card only comes with the card and a screw

how do i deal with the antennas if the case has none

any known problems with the ax210 on linux mint

thanks in advance


r/MiniPCs • • 1d ago

Recommendations Black Friday deal thoughts?

Post image
11 Upvotes

r/MiniPCs • • 1d ago

News FEVM shows 2cm thin mini PC with Panther Lake and 64GB LPDDR5X-9600

Thumbnail
videocardz.com
30 Upvotes

r/MiniPCs • • 1d ago

Can anyone help me understand why this seller is offering a brand-new product at such a low price?

6 Upvotes

eBay

https://www.ebay.it/itm/198715318617?_skw=gmktek+m8&itmmeta=01M7DM4QK06WJH8JE0R2WBV234&hash=item2e445b2159:g:GVIAAeSwDQ1qz5e9&itmprp=enc%3AAQALAAAA0CHNgUiiE%2FjQhlDTaMiAde9Q5zf76WeP8OLwIGRlY%2FjXYovo27QCmIuCTX8GYwRHoBkfEwfiRChYqIUam6oLlvuJwPW7EejxZo6Qc6KZX1I9HvA6c1bXgPA3vlh%2FKhzlweZ7ndNf8gZ6xaglQZO2LDicABDEfWphI8PDOpoWbAnE2S35T4xE1KzXm%2BH%2BdHiqrbz8XV1j%2FECpovGC24EkS4y%2B%2FXJB9YBmUvxovhPDGCUU1iqXsklYL0V2Vy7NknlFMyAVlUJnPJJoArmcK%2BhTHt0%3D%7Ctkp%3ABk9SR5z6krS7aA

I found a brand-new [product] listed at a price that seems way too cheap compared to similar listings. Is there usually a catch with deals like this — refurbished stock, open-box items, fake listings, or something else I should check before buying?

Has anyone had experience with this seller or bought from them before? Any advice on what I should verify before ordering would be appreciated.

AliExpress https://it.aliexpress.com/w/wholesale-GMKtec-M8-AMD-Ryzen%E2%84%A2-5-PRO-6650H-Mini-PC.html?osf=direct&spm=a2g0n.detail.header.0


r/MiniPCs • • 1d ago

General Question Setting Windows up on new barebone PC

2 Upvotes

Hello,

I recently purchased a new Minisforum barebones version mini PC (no SSD, RAM, or OS), and am trying to set it up correctly. I have already put 32GB of RAM and a 512GB SSD into the PC, but am unsure on what to do when I power it on. My old PC had Windows 11 Pro, but it came pre-installed,so I assume I am not able to move it to my new PC because it is OEM license.

I’m also guessing that when I first turn on my PC, it will open up to the BIOS. I could be wrong, though.
Do I need to purchase a new Windows 11 Pro license to get a new key to use during setup on this new PC? If so, where is a good place to buy a license?

I heard that doing a clean install of Windows is best, but how do I go about that? I have my SSD with my data from my old PC backed up, plus some data on my Google account as well. I hardly have anything on my Microsoft account. So, as far as back up goes, I believe I am okay. I am still a bit nervous, about losing data, however.

Just out of curiosity, is it also possible to keep your previous settings in Windows?

I would definitely appreciate any tutorials or advice. Thank you!


r/MiniPCs • • 1d ago

Recommendations Looking for something for emulation and cloud gaming

4 Upvotes

I'm looking for a SFF that can handle PS3/Xbox 360 emulation or at least PS2/OG Xbox emulation. I don't really care if it's a handheld or pc/laptop, though a handheld or laptop would be nice for it's "play on the go" capability. I will also be pc gaming on it, but I'll mostly be using GeForce Now for that, so having a way to install GeForce Now is pretty important as well. My target FPS is 60, but I also own Lossless Scaling on Steam, so I can always use that to increase my FPS (assuming the machine can run it). My target resolution is 1080p at minimum, 1440p would be amazing! I'm trying to keep it as cheap as possible, definitely under $1k, hopefully closer to $500. I'm fine with building something if I have too.

I'm currently looking at the Xbox ROG Ally X or possibly a mini pc.

I don't want to use Linux if it isn't plug and play. While I am tech literate enough to Google solutions to any Linux problems I might run into, I'm not willing to do so (I don't have enough time to trouble shoot problems, and game... It's one or the other).

I'm in the USA


r/MiniPCs • • 1d ago

General Question K8 Plus & CSODIMM

2 Upvotes

Anyone got these sticks to work, even just a single stick? I'm on original bios 1.01, would latest, 1.04 enable these sticks to work?, even at lower speeds? I have 32gb spare here.