r/Mini14 • • 11h ago

Took my hand me down out for the first time yesterday!

Post image
68 Upvotes

My grandfather left me his collection which included this beaut... 1989 time capsule with an aimpoint 2000 red dot (original battery still working).

Fired really nicely at the range with likely 30 year old ammo from a gun show. Gotta get the dot dialed in a bit, was shooting low at 100yds, but only 2 bad loads out of the 60 I brought with me.

Lots of fun to shoot and the range officer was creaming himself over it and and the sight....


r/Mini14 • • 1d ago

First Mini 30 Experience.

Post image
19 Upvotes

My first time with the Mini 30 and it was a great experience! The report was louder than I expected to be but quite a pleasure to experience after a few rounds in. It was an indoor range so the maximum was 25 yards. Had to squint to see the target with the irons, but managed to put all of the rounds inside. Overall, I’m quite pleased as it passed Steve’s harsh inspection as well.

Love my Mini 30! Next purchase, the Mini 14!


r/Mini14 • • 1d ago

LeverBoy

Thumbnail
youtu.be
18 Upvotes

r/Mini14 • • 20h ago

Tactical model with wood stock?

5 Upvotes

Has Ruger ever offered the 16” barrel with birdcage in a wood stock? I don’t have much experience with the mini14 but it’s next up on my list. After looking at the different models on rugers website, I think I want a model 5847 but with a wood stock. Is there any difference in the tactical and rancher models that would prevent me from just buying a factory wood stock and swapping it over?


r/Mini14 • • 1d ago

2Gun Match 10/31

32 Upvotes

Shot my mini at a local match recently. Went surprisingly well. Camera guy wasn’t it though.


r/Mini14 • • 1d ago

Tom River - Simple Living

Thumbnail
youtu.be
4 Upvotes

r/Mini14 • • 1d ago

Just got a 18500 question

Post image
11 Upvotes

Was wondering if this will block ejection i just pulled it off of another rifle i own for tenporary use because my range is 100 yds and i cant use semi autos on any other distance because of their rules. I could use irons but id much rather be able to see if im even close to paper


r/Mini14 • • 1d ago

TheKoba49

Thumbnail
youtu.be
4 Upvotes

r/Mini14 • • 2d ago

New new

Post image
56 Upvotes

Got this new scope on my mini... what ya think? Eye relief is perfect for me


r/Mini14 • • 1d ago

10 round magazine change technique?

2 Upvotes

Hi all. I'm a new mini 14 owner in the greater state of MA which in its infinite wisdom has limited us to 10 round magazines. I've been trying to practice reloading and I've found the 10 round mags finicky when it comes to a more deliberate reload. Like first removing the magazine with one hand, storing it, and putting a new mag in. The empty mag does not want to fully come out while pushing the release and grabbing the mag at the same time. It sometimes takes 2 or 3 pushes on the release and not touching the mag directly, letting it awkwardly fall into your hand. The quick flick the old mag out with the new works fine though. Is there a trick I'm missing? Or is my gun just more finicky than average? And would some form of extension for the mag release help? It's a new 580 series, yet to be fired.


r/Mini14 • • 3d ago

The "Wini14" is confirmed to be in GTA VI boys!

Post image
215 Upvotes

Now we can larp as ourselves!


r/Mini14 • • 3d ago

Mini in a Winter Wonderland

Thumbnail
gallery
95 Upvotes

Took the mini with me hiking due to the fact it looks like Peepaws hunting rifle but still can run a standard capacity rifle mag. Great fun lugging it through the blizzard.


r/Mini14 • • 3d ago

Recommendations for sight rail

Post image
35 Upvotes

Hi everyone,

I’m looking to mount a red dot, either RMR style or Aimpoint M4 style, to my 186 series mini 14. I’ve considered the Hannibal rail but wondering if there’s any good pic rails that mount over the action?


r/Mini14 • • 3d ago

Eye Relief Issues

1 Upvotes

Happened upon a 4x32 ACOG recently and I would love to mount it to my Mini 14 foldie but I can't find any realistic solutions to the short eye relief of the optic. There are numerous picatinny solutions that bring the optic further rear but I'm concerned that they would neither bring the optic rearward enough nor be sturdy enough to hold zero. Anyone have any experience with this issue?


r/Mini14 • • 4d ago

Thoughts on Firing Pin Swap for My New Mini-30 (5854)

Post image
36 Upvotes

Just picked up my new Mini-30 today and super excited to get this thing oiled up and to the range as soon as f'ing possible.

Quick question for the knowledgeable: based on everything I read before ordering this rifle, I was fully prepared to upgrade the OEM firing pin with the elongated aftermarket version to fix the shallow primer striking issue on steel cased ammo (I've got about 2,000 rounds of steel cased 7.62x39 mm ammo that I'd like to keep). However, when I called a local gunsmith he implied that issue was a "marketing gimmick" and his guidance was to go ahead and shoot steel cased ammo until it simply doesn't anymore, then swap the pin. He severely downplayed what I thought was a common issue.

Do any Mini-30 owners have a different experience? Is the problem of shallow primer strikes overblown or not applicable to the newer rifles, or should I proceed with replacing the firing pin regardless?


r/Mini14 • • 4d ago

Seen in the wild, Guatemala

Post image
79 Upvotes

Seized from a taxi. Older folding stock Mini.


r/Mini14 • • 5d ago

Finally got one with my mini 14

Post image
145 Upvotes

r/Mini14 • • 5d ago

I cerakoted the ugly black handguard.

Post image
54 Upvotes

r/Mini14 • • 5d ago

Im liking my current build

Thumbnail
gallery
39 Upvotes

Monstrum Vanguard Micro 1-6x LPVO

Tac Bros 5.8 in Picatinny Rail w/peep hole for irons

Choate Vented Handguard (filed down some to fit better and to account for pic rail)

ASI Accu Strut w/adjustable gas block

Wilson 1911 Recoil Buffer Pad (blue) internal on receiver

Pretty happy with this setup. I was previously using a green dot+3x magnifier but I didn't like how it adjusted (needed a key) and I was struggling to get that setup zeroed, also it didn't look as sleek. The LPVO is great at 1x for close range shooting, I can easily keep both eyes open and track to target with the illuminated reticle, and at 6x it's great for longer range. Maybe 4-5 inch diameter spacing at 100 yds.

I noticed that after I put both Recoil buffer pads its actually felt a bit rougher than before I added them, idk what's up with that. What are your experiences with internal buffer pads?


r/Mini14 • • 4d ago

Flip defense on 583 series

4 Upvotes

Hey all, any 583 series owners have success with the flip defense red dot mount? Noting their site states may or may not work with non-585 series rifles.

https://flipdefense.com/products/mini-14-mount-t2

ps, instead of downvoting, maybe actually comment. Smh reddit...


r/Mini14 • • 5d ago

Got a deer with my Mini 30 NSFW

Thumbnail
gallery
186 Upvotes

Stock rifle
Hornady black 111 gr MFX


r/Mini14 • • 9d ago

My new Mini Mini

Thumbnail
gallery
103 Upvotes

Just back from getting cut and threaded. Mini-14 SBR, Samson stock and Griffin GP5 can. Still looking for the correct sling swivel, and a stainless stock flash hider. And maybe a few hundred gold chains and a camo tank top.


r/Mini14 • • 9d ago

Final form for this frame

Thumbnail
gallery
139 Upvotes

I’m finally happy after making a few tweaks here and there and making a sight mount as well. Waiting on some machined parts, but once I give them the ok I will be offering this frame package.


r/Mini14 • • 9d ago

Order update summary from HUSH

14 Upvotes

Hush Holster Folding Stock Update – Mini-14/30 (November 2026)

Hush Holster just sent out a mid-November production update on their folding stock systems. Good news: they're getting close, although production has taken longer than anticipated.

Here's where things stand:

- Metal folding mechanisms: All production components are in hand. Drilling, welding, polishing, and black finishing are underway.

- Picatinny adapters: Ready to go for those wanting to use A3 Industries or other compatible folding stocks.

- Black carbon-fiber-reinforced nylon chassis: Designs are finalized and printing is underway, including the Mini-14/30. These will be among the first complete stock assemblies shipped once the folding mechanisms are finished.

- Wood/polymer hybrid chassis: Currently being printed and heat-treated. These will ship after the first batch.

- CNC-machined wood chassis: Prototype completed, with programming for mass production underway. These will be the last to ship.

Estimated shipping: Hush Holster says they're within a few weeks of beginning shipments, with fulfillment staggered according to the configuration ordered. No firm shipping dates have been announced.

They're a small American manufacturer and acknowledge that production has moved more slowly than expected. They also thanked preorder customers for helping make the project possible.

Bottom line: The Mini-14/30 folding stock project appears to be moving from development into production and fulfillment. The black nylon versions should ship first, followed by the hybrid and CNC wood versions.

Still waiting on mine, but it's encouraging to see tangible progress. Thought I'd share for anyone else following this project or considering one for their Mini.


r/Mini14 • • 9d ago

Ultimak vs amega iii for a scout scope?

5 Upvotes

I've read through many posts on each, but I'm still stuck trying to determine what the consensus is on which is the better option overall. This will be to mount a hi-lux Mkii scout scope on my mini-30 tactical.

I would especially love to hear from anyone that's had or used both.

A few other questions:

-Do the amega's heat vents actually help with heat management to a noticeable degree? (No pun intended).

-How annoying is the higher centerline height on the amega? Is the tradeoff worth it to gain the extra inch of further back eye relief?

Thanks yall!