If any of you are worried about the support will be like from MellowUSA don't let that deter you: they are great!
I rode the drive for one day on my carver board. It was such an amazing feeling when I mounted the drive, juiced up the battery, paired everything.
The drive, the wheels, the remote were all so shiny and sleek coming out of the box.
So my first test run went horribly. I tried to do a lap around the neighborhood on Rookie mode and I fell off my board because of how powerful the acceleration is. You really have to engage the throttle slowly. Rookie is slow, it's a little faster than jogging pace and the acceleration slows down like a normal skateboard and then restarts again when the board has almost stopped. I really like this mode for navigating busy streets, it helped me around my campus at peak walking traffic time.
I didn't learn my lesson with the throttle with eco and my board flew out and almost hit a tree. Once I got the hang of it though, eco mode is amazingly smooth and I reached 16 mph. I'm too scared of pro mode right now but will try it later on.
My incident:
I had no problems with my board until after I got out of class (battery had ~20%) so I rode it most of the day already. The drive started becoming very wobbly and I could feel every bump, the vibrations were loud. Going over cobble stone sounded like I was going over a field of rocks. I decided to just get home and diagnose the problem there. Trying to get there as fast as I could, I went over a bad road that made me wipe out and I have quite the wound to show for it on my leg. It wasn't until after I got home that I discovered the problem was that the risers that I put for the drive hadn't allowed enough of the screw to poke through. I remember when installing the drive I could barely get the hex nut to tighten the screw and I was so impatient to get the board out in the road I didn't tighten it all the way. Anyway two of them came off, causing the baseplate of the mellow drive truck to be really loose on my way home.
Here's where MellowUSA comes in: I called them up, told them what happened. I asked how I could get new ones and wanted to buy some but they weren't in the products store. Their first thought was to send me new hex nuts and screws for free. No questions asked, no waiting. They shipped the nuts right then and there. I'm loving their customer support already.
The ride
I'm used to 2 year old skateboards that weren't very fun to ride. However I did ride the board I mounted the drive on (Carver CI Flyer with CX trucks) for about a week so that's an actual professional model I can compare it to. My first thoughts on the Carver board: the carviest, most comfortable ride I had ever been on. The risers put high above ground and with the 70mm wheels I could roll over anything (my roads weren't super rough but had over 1" elevated cracks scattered around).
When I put the Mellow drive I was expecting the harder durometer of the drive wheels to make a lot of noise over the back roads and not soften vibrations. They did make more noise than the soft wheels of my carver but it was still minimal. The ride was only slightly less comfortable than my carver board with less urethane. I couldn't hear the motors, no words can describe how nice it is. People in my school have boosted boards and you can hear it from a good distance away. It always shocked people when I started pushing my board like a normal skateboard and then suddenly accelerated to lightning speed. Keep in mind I only went 16, But it's a freaking BLAST. The ride starts to get pretty scary at this speed but I'm learning how to tame the beast on my short board and will push to 20 soon.
Everything is as advertised. Acceleration is very smooth, braking is very smooth. I never felt unsafe on this board (except of course when the two hex nuts fell out -- totally my fault). This thing is built like a tank, I wiped out at least three times learning to ride and the drive can handle direct impact at high speeds like a champ. I only got 1 or 2 light scratches on one side of the drive. I can't tell how good the range is yet because Mellow advises to fully drain the battery on the first 5 runs and they say the range could be as low as 2-3 km until the battery calibrates. But I went 8 miles (I'd so 2 miles of that were pushing) and I had 21% left on eco most of the time.
Overall this is hands down the best purchase I've made in 2017. Thanks to Mellow and the crew for making such a fantastic product.
Individual components Remote : so nice. I love it's smal size and once you get used to the spring you can make very slight adjustments to your speed quickly. I can even put it in my pocket and accelerate, which really shocks people even more! I love shocking people if you can't already tell.
Wheels: excellent. motors are super quiet. The wheels get dirty fast (:( ) but that's to be expected. Bad roads won't chip these bad boys, I went over quite a few.
If you guys have any questions, just ask. By the way I can't recommend the Carver CI flyer wtih CX trucks enough. Mellow tried this board with carver C7 trucks, but I feel those would be a little too carvy for the drive. The CX trucks are a great balance between carving and stability. This thing really feels like surfing the streets. I will test it out higher speed once top speed is unlocked.
I'm out of commission until Tuesday. But once the hex nuts get here, I'll be back on the streets and can test anything if you guys ask me to. Except hill climbing, the highest I get here is like 5% and Mellow goes up that with not the slightest problem.
By the way I post here now more than my alt /u/sharpenedstinger.