r/MasseyFerguson • • Aug 29 '25

MF Beauty Shot MF 135 Renewal

Thumbnail
gallery
103 Upvotes

Ever since my father “loaned” me his 2005 Massey Ferguson GC 2310, I have been hooked on the quality and durability of this brand. That 2310 with a FEL and backhoe has done more work and saved so much time and labor, it’s paid for itself 10x over. He got it used from a relative for a little of nothing and it’s just been something else. So when I had the chance to buy a good-condition 135, I didn’t hesitate.

She’s a 1967 MF 135 with the 2.4L 4-cylinder Continental (gas) and has right at 2,360 hours, per the working tachometer. It belonged to my neighbor’s late father who used it on his rural farm here in southern Virginia for many years. My neighbor said it needed some work, but it seemed to only need some TLC to get her back to life. Went and picked her up on June 7, 2025 after having to buy new front tires and a new carb to get her moved out of his barn.

I did all the painting myself. Since I don’t have a professional sprayer, I simply used rattle cans of Rustoleum that comes in Massey red and grey. All the fluids have been changed, as were some of the wear parts like the seat and knobs. I also had to replace the original fuel gauge and amp meter, but the coolant, oil pressure, and tachometer/rpm gauges are original and still work with their original low-voltage backlighting (possible early versions of LED?). I tried hooking up the new gauge bulbs to the system but they overload; I might try and install LEDs for them at a later date. New nose cap too along with new vinyl decals. I opted to keep the original side-panel lettering since it isn’t too bad of shape and gives her character IMHO.

I had some issues with getting a replacement rim for the back-left tire (original was corroded from the fluid) and getting a new tube and fluid installed. But once that 3-week ordeal was over, I thought I had another problem with the replacement carburetor…tractor kept dying a few minutes after starting and warming up. Come to find out, the carb was starved for gas because the vent on the original gas cap was restricted causing a vacuum in the tank (i.e., hissing gas cap); cleaned the cap with brake cleaner and she runs like a top now.

If this was going to be a show tractor, I would have opted to have had it professionally painted and restored…but I did my best at restoring her to working condition and giving her a makeover. We have a long gravel drive that is steep in certain areas and needs continuous work to keep the ditches clean and the ruts held down…so a heavy-duty rear blade is in the works next.


r/MasseyFerguson • • 17d ago

MF Beauty Shot My old boy ! Red Fred has been the hardest working individual of this household

Post image
85 Upvotes

1983 220-4 with a nice front loader. Dont have anything bad to say about this tractor it is awesome! Super reliable and nice power from the 2 cylinder diesel engine


r/MasseyFerguson • • Jul 13 '26

restoration project Can she be saved? MF 135 (1967)

Post image
59 Upvotes

How do you tell if a Massey Ferguson beaut is salvageable? I don’t want to scrap her, especially if she’s still in a condition to be restored.

This was the tractor I learned to drive on, and my dad used it to mow the field until his death in 2013. I should have gotten around to selling it before now, but I wanted to crank her up again…dumb, I know. I’m sentimental.

Can’t see what running condition she’s in now because the battery disappeared out of the shop where I was storing it out of the elements. Where do I go from here? Any guidance? Ideally I’d like to get her into the hands of someone who appreciates the 135.


r/MasseyFerguson • • Jul 30 '26

MF Beauty Shot Washed and greased

57 Upvotes

r/MasseyFerguson • • Jan 24 '26

Massey at work The rain aint giving a break here in Brazil

Post image
55 Upvotes

Lets tow this big boy uphill


r/MasseyFerguson • • Oct 07 '26

MF Beauty Shot Picking this up Saturday!

Thumbnail
gallery
49 Upvotes

r/MasseyFerguson • • 11d ago

MF Beauty Shot I know its not a ferguson but...

Thumbnail
gallery
44 Upvotes

Both are from the 40s. Sorry about posting a harris and not a Ferguson but couldn't find a sub about the oldies


r/MasseyFerguson • • Dec 02 '25

General Question 1835m: is my dash backlit?

Post image
43 Upvotes

Moving lots of snow in the dark. Not a huge deal but would help if the dash was backlit. Am I missing something?


r/MasseyFerguson • • Nov 09 '24

MF Beauty Shot We’ve done it. Newark tractor show has set the world record for the most Massey Ferguson 135s in one place.

Thumbnail
gallery
42 Upvotes

r/MasseyFerguson • • Jan 25 '26

MF Beauty Shot Stuff's about to get really real.

Post image
41 Upvotes

24" + in the forecast. The mighty 1835m has a full tank and I have 3x 5 gallon jerry cans as back up. Just greased her up. Here we go💪


r/MasseyFerguson • • Jun 27 '24

MF Beauty Shot Late night mowing

Post image
41 Upvotes

r/MasseyFerguson • • Dec 23 '25

Mechanical Help Just acquired my first tractor.

Thumbnail
gallery
40 Upvotes

Hello everyone. I just bought my first MF-35 yesterday and I’m looking to nail down a few details. I was told it’s a deluxe model.

I know it’s a USA Standard width, Perkins diesel, and the two stage clutch(SNM) Serial number is 239755. The tractor does have diff lock even though it’s not in the serial number.

I checked the engine and it’s got a few different numbers on it. On the machined surface by the exhaust manifold is stamped 1959202 C.

Above the oil pan on the same side midway up the block it has 37111280 cast into it.

Just above the oil pan I have GKN1523N also cast.

Is this just a standard 35 or the X model? It’s a 12v system. Previous owner said it was converted. The alt needs replaced and it was smoked. I also need to replace all the wiring as most of it is in poor shape. Any suggestions on wire sizes? I know battery terminals should be 8gauge, and the wire to the alt should be 10. I would think everything else would be fine using 12 gauge. I really don’t want to buy several small spools of different diameter wire and never use it again is all.

The 3pt seems to drop when raised when you first fire it up, but I was told once the unit warms up it holds its position. What would the most common problem be with that? Changing the hydraulic oil is on the list and I know it requires 90wt GL-1 oil. Currently it has a little water in it(shifter boots are toast)


r/MasseyFerguson • • Jul 14 '26

Mechanical Help 64 MF 35 Perkins Diesel swap

Post image
39 Upvotes

Hello all. I inherited this 1964 Massey Ferguson 35 with a Perkins A3.152. The engine had a major failure and pulled two of the three dry sleeves into the crank and ate them like a Hungry Hungry Hippo.

I considered rebuilding the engine but I’ve decided to just replace it. I would like to replace it with the Direct Injected variation of the same engine. The Perkins AD3.152. Has anyone done this? Seems like it would be a common swap. I’ve read that the head is taller creating a clearance issue with the fuel tank and the hood, is there a way to resolve this without replacing the hood? Will I run into any figment issues with the lip seal on the crank, or do I need to get an AD3.152 with the rope seal?

I just need to know what parts would need to be replaced to complete the upgrade in a legitimate fashion. Flywheel and clutch the same? I want to be left with a reliable tractor that the average person would never notice wasn’t factory, any and all insight is much appreciated.

Thanks.


r/MasseyFerguson • • May 22 '25

General Question Broke rental 1749 loader arm with half bucket of gravel says the loader can pick 1900lbs rental company says it’s my fault

Thumbnail
gallery
39 Upvotes

r/MasseyFerguson • • Nov 26 '20

My first brand new tractor. It’s been an awesome Thanksgiving, I hope everyone else has had some time to play today. MF 1840M

Post image
39 Upvotes

r/MasseyFerguson • • Feb 06 '25

MF Beauty Shot Snow day cold start

38 Upvotes

We had a snow day awhile back and I had to feed the horses. So of course I had to do a cold start video. It was about 20 degrees and it hadn’t been started in about 2 weeks.


r/MasseyFerguson • • Dec 19 '25

MF Beauty Shot Look, this is my grandfather's MF, it's a 1195

Thumbnail
gallery
37 Upvotes

r/MasseyFerguson • • Aug 18 '22

MF Beauty Shot Almost finished 175 with turbo that rolls coal. YT channel MF175mp for driving videos and more soon...

Post image
37 Upvotes

r/MasseyFerguson • • Jul 23 '25

MF Beauty Shot My fully restored MF 10

Thumbnail
gallery
36 Upvotes

Before and after


r/MasseyFerguson • • Sep 03 '26

General Question 1958 MF 50

35 Upvotes

Just acquired this Massey Ferguson MF 50 and I’m looking for some advice on what I should do to tune it up. It hasn’t been worked or maintained in 6rs and sat indoors. Could I get recommendations on what to do to get this machine running its best, thank you


r/MasseyFerguson • • Jan 11 '25

MF Beauty Shot Felt cute, might scrape the snow from the driveway later. IDK.

Post image
35 Upvotes

r/MasseyFerguson • • 19d ago

General Question Looking for exactly what I have.

Thumbnail
gallery
34 Upvotes

I don’t know exactly what year my tractor is. 2 stage clutch? FE? Perkins A3.152? What exactly do I have?


r/MasseyFerguson • • Feb 17 '25

MF Beauty Shot My mf 135 multipower at Newark vintage tractor show

Thumbnail
gallery
34 Upvotes

r/MasseyFerguson • • Jun 20 '26

MF Beauty Shot Farming like the 80's

Post image
33 Upvotes

Old girl runs like a beast.


r/MasseyFerguson • • Sep 24 '24

Massey at work Finally put the 135 to work

Thumbnail
gallery
33 Upvotes

I picked it up for $3,500 two months ago and finally got to borrow a bush hog to mow the pastures with. Mowed about 5 1/2 acres with no issues so far. No power steering is definitely a workout but the tractor performed flawlessly.