r/Machinists • u/RagingCyborg • Feb 06 '25
r/Machinists • u/Nshmbrs • Oct 30 '23
QUESTION Any other lady machinists stress out male coworkers with long nails LOL
My coworkers get scared I’m gonna rip a nail off all the time and it’s so funny.
r/Machinists • u/JLHawkins • Jan 12 '23
QUESTION My wife and I are toying with buying a job shop or some other already-functional machining business. New to business ownership and machining, I’d like advice.
Ideally we’d get a shop with a crew and if we were really shooting for the moon, a senior/lead machinist that runs everything but the business side of, we’ll, the business. We’d take over that side of things until we understood what was going on, and then invest in the business to grow it. My goals would be staying profitable, keeping good staff, and not looking or sounding like a fool.
Reddit, have at it: tell me what to do.
EDIT: 77 comments and almost every single statement I make gets a negative score and this post have zero votes. I hear you all loud and clear - this industry is full of people that don’t like change, have crummy attitudes, and crap on anyone that questions them. Cool. I learned a ton by what (mostly) wasn’t offered - helpful guidance. For those that offered constructive criticism, thank you. To the rest, you’ve confirmed what I suspected, which is machining is rife with human problems. It really is just an old boys club like I was told by many. Maybe we’ll give it a run just to shake these old coots up. To the 20-year-old that got the fat raise by simply wondering, “could I do this better?” and following that to its conclusion, you are the future and if I run a shop you’re the guy I’d want to work with. To all the rest, fade away as the times, the tech, and the customers leave you behind. It’s so frustrating when entrenched jerks act like they’re right just because they’re rude.
r/Machinists • u/MachNero • Sep 08 '23
Unpopular opinion, don't care.
Guess what everyone, were paid like shit. No matter wtf you do, unless you have an "in", you get lucky, or whatever, your left to your OWN devices.
I feel lucky as shit to have a job where my input actually fucking matters. You want to go work fast food and be a drone, go fucking for it. I'm sure jr will be real proud of daddy. You want to be miserable 1/3 of you life, go fucking for it.
Maybe your not going anywhere because instead of doing something to get yourself further, your bitching around the water cooler(or reddit). The truth is this career can be very lucrative. You either have shit skills or shit expectations. Others will, with no doubt hold your hand and sing in chorus with you, but it doesn't make you any less responsible for where your at.
We fucking make shit so the rest of the world can do it's thing.
r/Machinists • u/Immediate-Rub3807 • Sep 15 '24
I swear younger people and basic handwriting skills have been gone for too long
I’ve trained a lot of apprentices over my 30 years in the industry and damn these guys now can’t write shit down on paper. That’s the first thing I do now when I’m training is putting things on paper because it just works but over the past 10 years I’ve noticed that that some of these guys can’t actually put anything on paper and when they do it makes no sense whatsoever. It’s like they’re holding the pen in a fist and writing things and it honestly looks like a 3rd grader wrote it.
r/Machinists • u/ender3838 • May 09 '25
QUESTION Should I try building my own lathe, or buy one?
I want to get into hobby machining, after doing some work on the lathe and mill for my college class.
I don’t want anything big, just a basic entry level lathe or something. I have a set of 2 1”diameter bearings, a motor from a razor E200 electric scooter, and some old bikes. I know I would have to buy a lot more parts. I have some Jacob’s chucks laying around but I might want a regular lathe chuck.
I have a cheap flux welding machine, a drill press, and an angle grinder, but that’s about the extent of my metalworking machines. I also have a smelting furnace but I doubt that will be helpful.
I currently have a shitty $30 lathe I got off Amazon, and it works for wood but that’s about it. I made some pens using it, and a couple little trinkets, but it’s just not doing it for me.
Here is a very basic sketch of the idea for context. I’m hoping that I can use it for wood, aluminum, brass, and maybe even mild steel?
If I should just get one, some recommendations would be nice.
r/Machinists • u/SpringQuiet2915 • Nov 02 '22
Does anyone else intentionally break off taps so they can spend hours milling them out instead of actually working?
r/Machinists • u/LurkyNighty • Feb 22 '26
Shitpost not sure if this fits here, but i'm making a lathe-girl design, what do you think? NSFW
r/Machinists • u/Outrageous-Till8252 • Nov 04 '25
PARTS / SHOWOFF Proof my gun works great! Ruger mkIV style upper
Two months ago I posted a video on how I did the CAM and milling for a Ruger mkIV compatible upper receiver. For some reason that post got some hate (I'll post the link to the post in comments). Ended up with 2 up votes and like a 50% downvote ratio. On the off chance that that was from people thinking that my design or milling for some reason might not work? I wanted to prove out that it did indeed work out just fine.
Fast forward to 1:17 to see it shooting and skip the little intro skit.
While making a functioning 22lr pistol isn't ground breaking due to the low pressures we're dealing with, I'm still pretty proud of myself. She runs like a sewing machine!
r/Machinists • u/hyper-shadic77 • Jul 22 '26
Am I actually considered a machinist? Also was I wrong for going to HR over my trainer?
Hey everyone,
I’m still pretty new to the trade and wanted some honest opinions from people who’ve been doing this a lot longer than I have. For some background I have about three years of machining experience from a vocational high school program. During that time I learned blueprint reading, precision measuring tools, basic machining and CNC fundamentals. So I’m not coming into this completely blind I understand a lot of the concepts but I definitely needed a refresher because it had been a while since I had worked in a machine shop. I’ve been at my current shop for about four weeks. It’s a production environment and I’m running a 2015 DMG Mori Seiki lathe. My day mainly consists of loading parts, making offset adjustments, performing quality inspections, checking dimensions and keeping production going. I inspect parts with micrometers, calipers, bore gauges, depth gauges, and a microscope when required. I can read blueprints, make work offset corrections and keep the machine producing parts within tolerance.
My first question is: Would you consider me a machinist, or am I more of a machine operator at this point? I’m genuinely curious where I fall.
As for the second part;
My first trainer (I’ll call him Bob) made my first few weeks miserable. Every day I was trying to learn he’d call me a dumbass, make me feel stupid for asking questions, dismiss things I didn’t understand and generally made me feel like I wasn’t welcome. Instead of teaching me it often felt like he was tearing me down.
One incident really pushed me over the edge. Before break Bob told me NOT to run the machine until he got back. So after break I sat at the machine and waited exactly like he told me.
Then another lead (Lets call him Jay) walked over and started yelling at me asking what the hell I was doing telling me to get my ass up and go do scrap work in the back. I was honestly confused because I was following the instructions I had just been given.
After several weeks of dealing with this kind of treatment and I finally filed an HR complaint. I gave them a detailed timeline of everything that had happened and HR met with me to discuss it. I explained that the constant insults, yelling and lack of actual teaching direction were causing me a lot of anxiety and emotional stress.
I also have ADHD which is even harder on me however I learn best by asking questions and writing things down. Because we work in a controlled facility phones aren’t allowed on the floor so I can’t keep digital notes with me. I’m doing my best to learn but being insulted every day instead of taught made it much harder.
HR ended up moving me to a different trainer.
My new trainer is definitely more respectful but he’s almost too hands on. Even when I’m doing something correctly he’ll stop me grab the part out of my hands or inspect everything himself before I can finish. I know he’s trying to make sure I don’t make mistakes but sometimes it feels like he doesn’t trust me enough to complete the process on my own.
So I have a few questions for the experienced machinists here:
Was I wrong for going to HR?
Is this kind of treatment just considered “normal shop culture” or was it actually out of line?
Based on what I’m doing now would you consider me a machinist or still just an operator? (My guess is an operator from what I’ve been doing)
Is it normal for a trainer to constantly step in even after you’ve shown you can perform the task?
Any advice for surviving the first few months in a production shop?
I’m not looking for validation I genuinely want honest opinions. If I handled something poorly tell me. If I need thicker skin tell me that too. But I also want to know if what I experienced would be considered unacceptable at most shops.
https://api.p1.mks.com/mam/
celum/celum_assets/resources/MKS-Labor-
Policy pdf
Any feedback is appreciated!
r/Machinists • u/[deleted] • Jun 07 '24
When the horizontal absolutely has to keep running and it's the end of your work day......
r/Machinists • u/JohnI9595 • Oct 13 '23
Weird manufacturing marks in steel.
I’m baffled here. I’ve been tasked with figuring out how parts were made and can’t for the life of me figure it out. These lines are on them and they’re made of stainless about .5” thick. Anyone know what process made these? I’m a mill guy so biased that way but am pretty sure they’re not made on one. Also pretty sure a water jet/laser wouldn’t make sense either. Thank you all in advance.
r/Machinists • u/Fickle_fackle99 • Aug 17 '23
ProTip: Don’t Keep a tool box at work.
So industry standard is supply your own tools, everyone runs out and buys a Kennedy tool box to keep at work.
Don’t do this:
1: We machine with huge bay doors open anyone can walk in during an all hands meeting and walk off with your box. Your employers insurance covers his stuff not yours… everyone knows tool boxes and tools worth a pawn shop trip for a quick paycheck
2: makes it harder for when you’re laid off
“But it’s faster”
You’re paid hourly, deducting your pay in order for your boss to make a profit… so he doesn’t have to buy tools or maintain them… if it takes you 20 mins to get a socket set out of your backpack then he gets to pay you for that.
Never keep more tools at a shop or equipment at a shop that you can’t carry out quickly when fired or laid off.
Frequently pair down the tools you keep at work, haven’t used those knipex pliers in a year? They go home.
Been a year since you last used that box cutter? Home it goes
I personally do a locker clean out every Friday. These safety glasses not my preferred pair home they go.
Keep it light don’t let your box get heavy
If you keep a big ass 2- bay tool box loaded with 10k worth of tools (very easy these days with the prices) it’s harder to roll that box out of there
And you may reconsider leaving the shop for an extra $2/hr
But if you have one of those electrician backpack tool bags and all you have to do is close the snap case of your calipers and shove it into your backpack
And keeping that desk clean of personal items
Then you’ll jump ship without hesitation
Edit: seems there is a group of lower IQ types that think I’m telling them not to buy tools. (Dept of labor has machinist IQ at 85 so I guess I over shot on a lot of you…. So buy the tools you need but don’t keep them in a heavy ass box that will weight a ton that is difficult to move use a tool bag and take your stuff home )
r/Machinists • u/HipsterGalt • Dec 03 '15
The file for those guys that drive lifted trucks with smoke stacks and monster emblems.
r/Machinists • u/grimetoke • Jan 21 '19
Someone crashed a lathe behind me as I took a pic of my setup VF4ss
r/Machinists • u/[deleted] • Feb 25 '25
Don't be this guy in a machine shop.
If you got time to do this you need to pick up a broom or some simple green. Don't be like him haha
r/Machinists • u/RettiSeti • Feb 27 '25
My manufacturing class just used this graphic to demonstrate climb vs conventional milling
See anything weird about this diagram?
For context: I’m a machinist also working on a mechanical engineering degree. My manufacturing class is doing a section on machining and showed this diagram. Never in my life have I been more tempted to “um actually” someone with a PHD than this class. This is just the most egregious thing but there have been many times where they oversimplify topics to the point of it being wrong.
r/Machinists • u/Shot_Boot_7279 • Feb 15 '25
QUESTION Thoughts on this old lathe and mill.
I found these in an old abandoned factory. The mill is a bit much but the lathe would be perfect for my shop. 🤣
r/Machinists • u/Sp3ctreZero • Apr 21 '26
QUESTION Help me understand please
Please help me understand what Ive been told. I would like a set of these made out of stainless, as they are for some old truck mirrors and are constantly exposed to the elements.
Send Cut Send won't make them out of stainless, at least there's no option online. Another place wanted to charge around $70.
Locally, I had a shop tell me if he had his employees do it, he'd have to charge me $300 and it'd be an all day ordeal.
Im not a machinist. One day id like to be but thats not the point here. Surely its not an all day ordeal? And why would the guy need to charge me so much for so "little work". Thanks!
r/Machinists • u/[deleted] • Mar 28 '24
QUESTION Is this sufficient for you to be able to make? NSFW
Just wondering of you could make this off this drawing. Mainly asking the younger and less experienced people on here. I have been asked to start drawing up common parts we make for the new guy who is basically a first year apprentice.
r/Machinists • u/duckedbyaporcupine • Apr 06 '22
I'm gonna open a day spa. send the wife in for her nails and a relaxing soak in the coolant tank
r/Machinists • u/Vegetable_Huge • Oct 29 '25
Stemless Spinning top
Pretty cool stemless spinning top i made for someone . Bronze, titanium and turboglow. Contact point is a 12.7mm silicon nitride bearing ball