Hello everyone!
I have a 2016 Mini Cooper S 4dr Hatchback F55 version.
I am replacing my oil housing because I had a coolant and oil leak (mostly coolant).
CONTEXT
I have had it for 3000 miles and sadly two days ago was its first injury (part malfunction)
I had coolant leaking from it to the point that I had no heating inside and I drove it like that till my school (13 miles/30 min) with no overheating issues thankfully. After that I put coolant into it right after school thinking it is a small leak and still drove it normally for 4 days more.
I then noticed that coolant was dripping out of it when I was on a slope (my driveway). I put it on ramps and took off the undercarriage (the fabric thingy) off and noticed green coolant dripping and some oilish compounds at the front. I WILL ATTACHED PHOTOS WHEN I GET HOME
I unscrewed the bottom and saw coolant spots at it coming from the front so I ordered a oil housing and coolant flange (another common coolant leak location) to replace which will come Tuesday (November 17th, 2026) but please do not think that I wont read your comments if they are after this week, I am sure other mini owners will find this helpful too! I couldnt clearly see whether it was the oil housing that leaking or the coolant flange but I decided to order both of them and replace them.
ISSUE
FIRST ISSUE
I believe there is a little bit of contamination between the engine oil and the coolant so I will want to flush it out, both systems to unsure not further issues. But I am unsure how to throughly flush the engine oil.
My dad suggested to drain the oil from the engine and run it for 5 minutes with 2 litres of oil and 1 litre of 1 diesel and then put in new oil.
I also heard that putting in new oil with some transmission fluid since it is mostly a detergent works well.
But how many flushes do I do and do I also do a 1000 mile or 500 mile oil change?
I also have heard of engine flush fluids but I unsure which or if to pick for my mini.
My method for the coolant system is going to be (please correct me if I am wrong) draining out the current coolant out of it and flushing it out with distilled water 2-3 times while running the car for a certain amount of time (need to do research for how long; please give advice!). BUT I WILL FIRST DO THE ENGINE OIL FLUSH because I need to do that before because I need to run the car with obviously.
SECOND ISSUE
My second issue is that alongside replacing the plastic oil housing with a aluminum oil housing I also want to replace the coolant hose connector/flange because research says that the coolant flange is also a common location for coolant leaking so why not replace that with a metal piece too I thought!
What other parts should I replace/repair to stop future coolant leak/ any common issues in general too.
I will add more to this as I go into the car and find out more but there is more to await! Please tell me your wisdom and knowledge lol!