r/M1A • • 14h ago

Sitting in the woods, waiting on some food to show up.

Post image
155 Upvotes

Wife kicked me out of the blind before we even got to it this morning. She's mad I dropped a nine point with an open sighted 89 dollar Walmart special muzzleloader yesterday morning. Only spikes, raccoons, and squirrels so far today so the joke is on her.

Socom 16 in USGI wood from Treeline. SEI gas plug and parts to mount the Polonium 30. Eotech 512 up top. That suppressor makes for a gassy broad, but she is quiet and has a great personality. I'll report back covered in deer hairs if'n we have any much luck.


r/M1A • • 2h ago

Does Anyone Else Want Magpul to Make a Chassis for the M1A?

6 Upvotes

The Magpul Hunter/SGA style stocks are so great, and I feel like they would translate to the M1A platform amazingly well. The cheek riser and LOP adjustment would cover all types of optics, and 3/6/9 o'clock Mlok slots would give plenty of options for people wanting to do marksman type setups, as well as us that want foregrips, lights, etc. Anyone have any thoughts?


r/M1A • • 1d ago

All tucked in

Post image
76 Upvotes

r/M1A • • 1d ago

Will a medium contour barrel help against the m1a floating zero?

Post image
14 Upvotes

r/M1A • • 2d ago

Marching to a different drummer

Post image
37 Upvotes

r/M1A • • 3d ago

3D printing a proof of concept. I will not be accepting any feedback.

Post image
193 Upvotes

r/M1A • • 3d ago

The M14/M1A ... Why The Hate?

Post image
167 Upvotes

I found a YouTube video asking this question... here is my answer.

I noticed the hate ramping up as GWOT kicked off... I could be wrong but it appeared to me that the vast majority of the modern hate was generated by the friends and family side of Knight's Armament Company. It felt like there was an organized campaign to push their M110 program while trash talking the M14 and anyone that supported the M14. They pretty much abandoned civil discourse back then and a lot of that is still with us today.


r/M1A • • 2d ago

What Size Scope Rings?

2 Upvotes

What size scope rings are you all running? I have a Sadlak steel mount and I want to mount a scope with a 44mm objective as low as possible. I know what size rings I would use on a traditional hunting rifle, but I don’t know if the rear sight of the rifle will be an issue or not. Thanks.


r/M1A • • 3d ago

Common Rust spots?

Thumbnail
gallery
9 Upvotes

In an EBR Chassis. Has been in it for about 10 months.


r/M1A • • 4d ago

1982 M1A

Post image
161 Upvotes

Got an M1A in the 022xxx serial number range for 1400. How did I do?


r/M1A • • 4d ago

Heavy Metal 🤘🏼

Post image
87 Upvotes

r/M1A • • 4d ago

Heavy Metal 🤘🏼

Post image
3 Upvotes

r/M1A • • 4d ago

Bad Ace Low Profile Mount

4 Upvotes

Looking to mount an LPVO to my M1A. Does anyone have any experience with the Bad Ace low profile mount that replaces the rear iron sight? Does it work well? Is it a good buy for sub $150 or is there another/better mount for around that price.

Thanks!


r/M1A • • 5d ago

Pro tip if you want a compact M14

Post image
29 Upvotes

Install one of SEI's gas lock front sights (I prefer the HK style) plus their DC Vortex flash eliminator on the 18" Bush & Scout barrel and you have reduced the overall length of the rifle to nearly that of the Socom 16 without a loss of muzzle velocity and without the loud yet effective proprietary GLFS/muzzle brake used on the Socom 16


r/M1A • • 6d ago

Reccomend a company that will replace my M1a standard barrel please.

13 Upvotes

My standard M1a has started keyholing on the target, so it's time for a new barrel. I am aware that I could order a barrel and have a local gunsmith replace it; however, I would feel better sending it to a company that specializes in M1a's.

Which company have you used or would you use? On Edit: This rifle is from the 1970s, and I bought it used in the 90s. It is not eligible for any warranty work.


r/M1A • • 8d ago

Can you get away without having a cylinder wrench to install the barrel band?

Thumbnail
gallery
26 Upvotes

I'm brand new to this system and still trying to get my bearings.

The used rifle came installed with a Troy systems m14 modular chassis but I heard things rattling around and would just prefer to go to stock-ish while it's new to me.

I had to buy the top handguard and the rear clip, and I think I have everything to put this in the Delta 14 stock.

Still getting used to identifying the parts.

From what I can tell I just need to pull off the muzzle/gas cylinder section in order to get the barrel band installed for the handguard.

Can I get away without buying a gas cylinder wrench this first time just to get things to a fireable state?

Also the Op Rod Guide seems to be missing a pin but is in there pretty sturdy. How critical is this just for initial firing tests?

Because this weapon came in a half modded state, im still getting used to part identification I keep bouncing back between "I have everything" and "I'm missing a handful of parts".

Hopefully you guys don't hate me for going from my previous "look new gun!" post to this 😬


r/M1A • • 8d ago

Updated pics of my BFRS pistol grip

Thumbnail
gallery
22 Upvotes

Here's some pics of my custom 3d printed pistol grip for my Blackfeather RS chassis, showing the trigger guard works as intended and that the trigger group can be removed.


r/M1A • • 8d ago

M1A Blackfeather RS Mod 2 Trigger Pin Issues

5 Upvotes

I have a Scout Squad that I put in to a Blackfeather RS Mod II chassis earlier this year. I finally had the opportunity to go to the range a couple weeks ago. My setup was working great until I got to the 54th round when the trigger wouldn’t reset.

This cut my trip short as I couldn’t fix it on the spot. When I got home, I couldn’t even get the trigger group out of the stock. I’ve disassembled my scout squad before, so I was frustrated I couldn’t get the trigger group out of the stock. I broke down and contacted Springfield for warranty work. They finished up today and are shipping my rifle back with this response:

” *ISSUE IS BEING CAUSED BY AFTERMARKET STOCK. THE WAY IT IS DESIGNED, THERE IS A SPACE NEXT TO THE TRIGGER PIN INSETAD

OF THE STOCK BUTTING RIGHT NEXT TO IT. THAT SPACE ALLOWS THE TRIGGER PIN TO WALK OUT AND CAUSE ISSUES.”

I assume this will happen again without any modifications to fix the problem. Anyone have any insight as to what I could do? Any tips to get the trigger group out of the stock if it’s stubborn and not budging?

TIA


r/M1A • • 9d ago

A.R.M.S. #18 struggles

Thumbnail
gallery
91 Upvotes

I purchased the pictured mount back in July 2022, probably the final production run. I have used it on a couple rifles, and easily fired a couple thousand rounds with it mounted.

The M1A receiver is probably not quite "correct" for the GI M14 mounts. Any dimensional difference in the stripper clip guide dovetail or alignment side channel make properly attaching the mount questionable. This means that some mounts need slight fitting or modification at best, and plain do not fit or ever maintain zero at worst.

In the case of this ARMS #18, it didn't fit super well, so I had to make it work by filing the lug that fits in the receiver channel. The clip dovetail provided some interference with proper fit at full torque, so some filing was needed there too to get it fully engaged and straight on the receiver.

The front of the mount has a level adjustment screw of sorts to offer a 3rd point of contact (much like Sadlak and others) and to ensure vertical support. This screw doesn't really like to turn and requires a spanner bit. It's a pain.

That said, once it fits and is torqued, the #18 does not move.

Many know well that the mount is so low it can trap cases if the ejection angle and force are not tuned. Accomplishing that tuning is nothing more than trial and error. In my case-with both rifles-the tuning was mostly successful by installing LRB bolt guts (extractor and ejector springs and plungers) as well as GI extractors.

Still, another consideration for avoiding trapped cases is the ring type and placement. If the clamping base of the ring(s) intrude into or over the ejection path at all, it will be a problem. For instance, the large Aimpoint 30mm low ring clamp, centered on the picatinny rail, would help to snag brass, especially in rapid fire. BTW that new style $80 ring is not worth buying at all.

The cheapo old Weaver ring is pictured. Not the best quality thing ever, but the clamp base is small. I have yet to test it but will do so soon.

I could probably use an Aimpoint 9000 with its two rings and avoid the centered ring issue in that way. Maybe worth doing if this doesn't work. Or I could just use a Sadlak Airborne and give up on the ARMS #18. I really don't want to add a cheek riser though.

Tldr; the ARMS #18 is hyped, but comes with a painful journey to achieve proper fit (at least on a Springer) and complete reliability.


r/M1A • • 10d ago

Designing a 3D printed Blackfeather RS MOD 2 pistol grip and Custom folding buttstock. (reupload with attached SolidWorks Screenshots)

Thumbnail
gallery
20 Upvotes

I've been designing some custom furniture for my Blackfeather RS MOD2.

Already 3d printed a custom pistol grip based on the DFCO Wushu Grip, with a trigger finger extension to bridge the gap between the grip and the trigger guard. I know someone else was already printing grips with this feature, but the main distinction here is that this still allows disassembly of the rifle without having to remove the pistol grip, and it worked flawlessly. Printed out of PA6-CF20 Carbon Fiber Nylon. Despite the extension being fairly thin (about 3/32 thick) it's incredibly strong. Using all my effort, intentionally trying to break it by hand has proved unsuccessful.

Next up is a custom Folding, Telescoping stock for it that maintains the design profile of the BFRS2. Going to print it also out of carbon fiber nylon for the main body and folding components, and a mixture of ASA and TPU for the rest. If everything works out well, I'll possibly get things CNC'd out of Aluminum later. For now it'll be reinforced with either a carbon fiber tube, fiberglass rod, or threaded 5/8 aluminum rod in the center of the adjustable portion of the body. The actual buttstock part will have adjustment for cant, as well as cheek weld.

Let me know what you think!


r/M1A • • 12d ago

Finally suppressed!

Post image
108 Upvotes

Been on a mission to suppress all my long guns and carbines….finally got to my M1A SOCOM 16. Got a couple of other small things I wanna do to “complete” the rifle (like remove the scout scope mount and replace it with a full guard) but, I’m pretty much happy with where it’s at and the accuracy so far on the 1-8x FFP LPVO. I’m consistently on target at 500 yards. No, it’s not a 1 MOA gun but I love it anyways 😋


r/M1A • • 12d ago

Gifted a used M1A - need help figuring out what it needs

Thumbnail
gallery
54 Upvotes

My girlfriend just recently gifted me this used M1A SOCOM 16 and it came with the Troy M14 modular chassis 3EZ11 pre-installed, and a bag of miscellaneous bits. (I tried switching it to the polymer stock, but it seems loose?)

This is my first big gun and other than a 22 rifle it's my first gun that isn't a handgun so a lot of this is out of my wheelhouse right now.

It seems inside needs a little TLC and I'm trying to figure out all that needs done to it so I can safely fire it.

From what I can tell I am missing that upper handguard if I want to use the standard polymer stock so I may put back on the M14 chassis. But something was rattling and loose, I think the U shaped clamp that helped hold the barrel. I'm still trying to figure out what all the parts are.

Does anyone know how I would go about getting the Troy m14 chassis re-installed onto it? I'm having a hell of a time finding any info on it online.

Any guidance here would be appreciated because I don't know what damn thing about this right now and I really want to be able to take it to the range ASAP.


r/M1A • • 13d ago

Dreaming of a Blackfeather RS MOD II for Christmas?

Post image
65 Upvotes

All haters are encouraged to place your orders now so your new chassis stock arrives in time for you to place it under your Christmas tree... don't delay.


r/M1A • • 12d ago

M14/M1A – Cycling with Subsonic Ammo?

4 Upvotes

Hello to all M14/M1A owners and enthusiasts!

I have a technical question for you.

Has anyone managed to get an M14/M1A to reliably cycle with .308 Winchester subsonic ammunition?

I'm curious whether this is even possible without major, irreversible modifications to the gas system.

With my Norinco M305B, I currently have to cycle the action manually when shooting subsonic ammunition.

I'd love to hear about your real-world experiences and any design limitations you've encountered with this platform.

Thanks for any useful insights!