r/Luthiery • • Sep 20 '16

Clearcoat as a Pickguard?

1 Upvotes

Hey all! I'm finishing up my first guitar. Honduran rosewood back, mahogany sides and neck, and a redwood top. I'm planning on using a high gloss finish for the back and sides, but going with a tung oil for the top to keep the natural look.

I'm thinking about using the same high gloss finish from the back and sides to put a pick guard on the top, that way I can still have that part of the top protected while still keeping the natural look.

Anyone have advice on this? will a few coats of clearcoat on one part of the top adversely affect the sound, or am I ok?


r/Luthiery • • Aug 03 '24

Bass active circuit

Thumbnail
gallery
4 Upvotes

Hello, I'm trying to build a bass, 2 pickups, with an active circuit.

I don't understand about eletronics very well, so I bought a pre made circuit, with 1 blend, 1 volume, 2 tom a battery, the jack and a "little box"(I don't understand how it works).

The pickups I bought also does not say which cabe is ground or hot, it has 2 cables going out of it.

The only thing I was suppose to do was to weld the hot cable on the middle of the blend, and the ground in any ground place.

I did it... It didn't work, so I reverted the cables to se if the hot and ground was wrong. It also didn't work.

Now I have no idea what can I do to make it work. Can anyone help me?

I'm using this circuit and these two pickups, the pickups cables that came is green and yellow, and red and yellow.


r/Luthiery • • Mar 01 '14

Step-by-step methods for building ukuleles two different ways

Thumbnail
woodgears.ca
2 Upvotes

r/Luthiery • • Mar 01 '14

Instrument blueprints for sale at Elderly Instruments

Thumbnail
elderly.com
1 Upvotes

r/Luthiery • • Mar 01 '14

Instructions for just about any mandolin repair you can think of, with photos

Thumbnail mandolinluthier.com
1 Upvotes

r/Luthiery • • Feb 15 '18

Unexplained(?) Fret buzz issue

2 Upvotes

Not sure if this is an appropriate forum for this question but I've been having trouble figuring this out. I just got a Fender AVRI 65 Strat and I've been having fret buzz mostly above the 12ish fret. The neck relief is good (~.012"), frets are level, and I've radiused the saddles to match the neck radius (7.25) as much as I can. The D and G saddles are as high as I can get them. I'm usually pretty competent at guitar work but I can't seem to solve this. I'm thinking that because the neck is a little thicker than usual strat necks, it is limiting the amount of clearance I can get by adjusting the saddle height. I have another strat with a vintage neck radius that doesn't have this issue so I'm thinking it isn't necessarily related. Any thoughts? Edit: Fret buzz actually starts at E 7th fret, A 5th, D 7th, and G 9th if that helps.


r/Luthiery • • Apr 11 '14

Building a fret slotter for hand-sawing, with guide templates

Thumbnail
dulcimers.us
2 Upvotes

r/Luthiery • • Feb 02 '16

Can someone help identify the wood used in this Charvel guitar? Picture in Description

1 Upvotes

Hi everyone, hopefully this is the right place to do this. I bought this USA Charvel DeMartini Snakeskin a while back, and finally switched string gauges, so of course I had to open up the trem cover and make some adjustments. I noticed that the exposed wood looks a lot like mahogany to me, but the guitar is advertised as having an alder body from the factory. As someone who knows relatively little about woods, other than what I've just been googling, it looks nothing like alder to me. Since you guys know much more than me about this, I was hoping you'd chime in.

Here's a link to a picture: http://imgur.com/a/1s2QP


r/Luthiery • • Jun 17 '15

Piezo pickup designs for violin bridges

1 Upvotes

Hello, Does anyone know of any good resources for building "electrified" violin bridges? Joseph Curtin is probably the coolest violin maker today and I'm interested in playing around with his bridge concept but embedding piezos into the bridge at the same time.

The piezo tutorials i've found haven't been very exciting so far... Any thoughts or direction would be highly appreciated!


r/Luthiery • • Nov 19 '17

Laser interferometry or 2d harmonic analysis to supplant tap tuning?

1 Upvotes

For a while, I've been thinking about how stringed instrument top and back plates could be measured in two/three dimensions while a wave or impulse is applied to them, to make for something more precise/scientific than tap tuning.

I've thought about systems as simple as placing multiple transducers on the plate, but I've recently read about speckle pattern interferometry used to measure the vibration nodes of violin plates.

Perhaps a laser interferometry system could be used in the workshop to measure the vibrational patterns of an instrument while it is being constructed. Programming a reference to an "ideal" pattern could even give visualizations of where wood should be removed.

Another idea, going back to transducers or even laser microphones, would be to perform a harmonic analysis of many points on the surface of the plate. This could be in lieu of the interferometer, or as an additional tool.

Does anyone have any input to a discussion on the creation of a reasonably affordable DIY interferometer setup for this purpose? I'm thinking something like this could help any level of luthier to make more consistent good-sounding instruments.


r/Luthiery • • Apr 03 '14

The Heretic's Guide to Alternative Lutherie Woods, by John Calkin

Thumbnail guitarnation.com
1 Upvotes

r/Luthiery • • Mar 31 '14

An old forum thread on making your own electric side bending iron at home

Thumbnail
kitguitarsforum.com
1 Upvotes

r/Luthiery • • Mar 31 '14

Some patent images I unearthed for curious old ukulele designs. May they serve as inspiration!

Thumbnail
imgur.com
4 Upvotes

r/Luthiery • • Nov 09 '16

First Acoustic build - Selmer Maccaferri style

Post image
25 Upvotes

r/Luthiery • • Aug 18 '24

Help please

Post image
2 Upvotes

Can somone tell me how to get this fret in plane with all the other ones I’m kinda an idiot


r/Luthiery • • Jul 15 '24

Homemade Jig

Post image
1 Upvotes

When you can't afford a jig, you make one for $10 out of cardboard and a dremel attachment.


r/Luthiery • • Jul 16 '24

Body dimensions

2 Upvotes

Hello, I'm starting a bass build, and I also intend on making some guitars. I'd like to know if there is an average radius for the waist of the instrument. I want to draw the model layout, but I don't want to go too far from the average.


r/Luthiery • • Aug 06 '24

Ibanez RGA7 Bridge Modifications

2 Upvotes

I obtained an Ibanez RGA7 yesterday and would like to replace the Gibraltar Standard 7 bridge with the Ibby HM bridge from Hipshot. Hipshots website suggests that their bridge is a direct retrofit for the Gibraltar Standard I and II, however the RGA is an archtop guitar, has anyone seen this modification done or has anyone here done it?


r/Luthiery • • Aug 21 '24

how to i wire a push pull as a kill swich with 2 conductor pickups?

1 Upvotes

r/Luthiery • • Jul 12 '24

Warped Neck

1 Upvotes

Hi all

First time posting. I'm building my own custom PRS style using parts from various places. The neck is Chinese and I've kinda ignored the apparent warp until now when I've started to stain the neck. In the photos you can see the obvious twist on the top E side, more apparent towards the nut. Realistically is this going to cause me massive problems? For info, I'm looking to use a Wilkinson GTB wraparound bridge. The frets appear to be pretty OK and it isn't a bad job fret wise, but the twist is worrying me a little. Do I continue or scrap this and try another neck?

Thanks for your help.


r/Luthiery • • Sep 01 '24

How should I go about fixing this

2 Upvotes

noticed the top of my grandfather’s old mandolin sinking in when putting on strings, so I put a borescope into the sound hole and found this loose brace. Any idea what the best method for fixing this would be? I don’t have a c-clamp nearly deep enough to put pressure on it.


r/Luthiery • • Oct 13 '18

Not quite sure if I'm asking this correctly...

1 Upvotes

Extended range chuggah chuggah dude here, thinking about taking on the project of picking up a bass body/neck and converting them to an 8 string guitar. I the majority of it , but the one thing I'm hung up on is the fret work/neck profile.

I'd like to do a 686mm/747mm (27"/29.4") fan, but the neck I'm looking at isn't designed to do fan fret.

I'm curious if fan fret requires different radial geometry across the fingerboard or in the profile on the back of the neck, because I've picked up a few production model guitars that are "fanned fret" and it really just didn't feel right, while I've held others that were made for friends of mine as part of an endorsement deal that played like butter.

Any insight would be greatly appreciated, before I drop the money on a body and neck


r/Luthiery • • Oct 06 '18

Jointing solid-body guitars?

3 Upvotes

I'm interested in trying my hand at luthiery. I do have a refinishing project under way right now, but I would like to eventually build a guitar from scratch, or at least a body (I'm not sure I can tackle building a neck just yet). I've been watching a lot of videos on the subject for a while now, and it seems that a lot of people don't bother to properly joint the pieces of wood they're using for the body. They simply glue the flat edges together and clamp. I'm certain that doing this would result in a weaker body, but I don't really know how much. I'm not an experienced woodworker so I don't have a gauge for what kind of strength you need out of a guitar body, and how much of that strength you can get by just gluing two flat edges together. Is this a valid way of building a body, or a shortcut that will have ugly consequences later on?