r/Linocuts • • Aug 02 '26

Meta A post on the stance of r/Linocuts and Generative AI use.

622 Upvotes

This post is being made to draw attention to rule changes that happened a few months ago, and to clarify the stance of this subreddit on the topic of Generative AI use in our printmaking community:

You are free to have your own feelings on the matter of Generative AI, but the position of this subreddit is that it does not have a place within our community in any capacity.

Using it for image creation for prints is strictly against our rules, as per rule 5:

"AI generated art in any stage of a print's development is not appropriate anywhere in this subreddit."

We were previously more lenient on it, purely because it is not a simple thing to moderate. The supposed tools to check are wrong as much as they are right, and often use AI to search itself which we have no interest to use. In an effort to accept the inevitable that users would use it in concept creation, we tried to facilitate it in a way that allowed it with clear disclosure despite our personal misgivings (which have not wavered). What we found was that most still do not disclose, and the larger implications of Generative AI have grown beyond what the moderation team has any desire to entertain.

If Generative AI did not come with the political, environmental, and ethical issues intrinsically linked to it, it might be different and we would view it as another tool and carry on with just requiring a clear disclosure of use. However, that is not the reality we’re in. The heavy investment and shoehorning into every possible avenue by tech companies, many of which have suspicious if not sinister ties and influence in global politics, makes use and allowance of it effectively an endorsement that we do not wish to have here.

If you are someone who feels they cannot create “good enough” work without Generative AI, you are giving up before you’ve even started. No one was instantaneously amazing at any aspect in art. Making shit art is part of the process, and it takes dedication and practice to improve. I can guarantee that anything you’d make by your own hand start to finish would be infinitely more interesting than what a Generative AI model churns out for you. If you feel like you are not at the skill level you want to be for the prints you want to make, keep making; do artist studies, utilize a sketchbook more often, draw from life, collaborate with other artists to create. Taking shortcuts like using Generative AI will only slow down your own skill development and if noticed, will make anything you make going forward have a shroud of doubt over it.

The internet is a changing landscape with some worrisome aspects, but it also is a wealth of knowledge if you look for it. The process of research (not asking “Chat”) will be of greater benefit to your learning process, and may take you on new creative paths in your work along the way. Printmakers especially have long been a community driven group of artists, relying on each other to learn and make in community spaces. Rarely have I experienced a printmaker guarding techniques, often all the more happy to share with other creatives. 

Why would you outsource the creative process to an AI model that feels nothing and does not carry your artistic voice? If you still wish to take shortcuts at the expense of actual artists, then that’s your prerogative. But this will not be the community for doing so. Generative AI has no place in this subreddit, and usage against our rules will be moderated harshly after a warning going forward. 

If you suspect posts of Generative AI use, please add reasoning/evidence in the report so we can properly evaluate. We are not in the habit of banning without substantial proof.

The same post is being added to our affiliated subreddits r/printmaking and r/lithography.

Thanks for reading, and happy printing!


r/Linocuts • • 19d ago

Monthly Self-Promo Thread - A Space for Socials, Sites, and Shops.

1 Upvotes

Here is a space to post your socials, sites, and shops.

This is a monthly reoccurring thread. You can post direct links (please note if NSFW) or handles for other social media sites.

Why don't we allow self-promo otherwise? We have made a concerted effort to keep this space free of commerce and self-promotion, to keep this a community about the work and craft when increasingly many social media spaces have become spaces of commerce. We understand that art is an important source of income for some, so in order to facilitate this without it becoming overwhelming in the rest of the sub, we have made this a reoccurring monthly thread.

NFTs, crypto art, and AI generated art are not appropriate anywhere in the sub.

If you think your comment hasn't posted/been removed, please message us through modmail as it may have gotten caught in our spam filter and need approval before showing up.

**We've added a Discord for r/linocuts!** Link is in the sidebar for those interested.


r/Linocuts • • 4h ago

Single Layer Prints Carousel Style Unicorn

Thumbnail
gallery
109 Upvotes

Some prints for the upcoming holiday season! Printed with black water-based ink and purple/red/yellow Shachi•iro ink pads. (Second slide painted with Gansai Tambi watercolors)


r/Linocuts • • 16h ago Heartwarming

Reductions/Multi-Blocks getting back into printmaking 🎄

546 Upvotes

it’s been ~6 months since i’ve carved, decided to get into it again to make christmas cards for my family and friends.

enjoy this video of me printing this silly little christmas pickle 🎅🏼


r/Linocuts • • 7h ago

Single Layer Prints Baby's (me) first linoprint

Post image
43 Upvotes

I think I may have made one in like 4th grade but I'm 32 now so it's been a while.


r/Linocuts • • 13h ago

Stamps Holiday bookmarks made from lino scraps!

Post image
140 Upvotes

r/Linocuts • • 14h ago

Single Layer Prints Playing with structures and abstraction

Thumbnail
gallery
140 Upvotes

matrix 100x70cm


r/Linocuts • • 15h ago

Single Layer Prints Sandhill Crane on 12 x 18 Kozo paper

Post image
118 Upvotes

r/Linocuts • • 1d ago

Single Layer Prints Heyo!

Post image
614 Upvotes

First post here so…sup?

A5 cut of beekeeper. Only started drawing/printmaking in April of this year so I am very open to suggestions on how to not get my printa to turn out so patchy!


r/Linocuts • • 12h ago

Single Layer Prints This year's cards

Post image
52 Upvotes

The pine cones were a single layer, and the holly at the corners were stamped. The berries were done with Sharpie.


r/Linocuts • • 18h ago

Reductions/Multi-Blocks 2 block print

Post image
87 Upvotes

First test of a 2 colour owl print


r/Linocuts • • 12h ago

Single Layer Prints New design from this week!

Post image
17 Upvotes

Just wanted to share with yall.


r/Linocuts • • 22h ago

Work In Progress A recent experiment with lines and overlapping prints

Thumbnail
gallery
23 Upvotes

Sometimes when I’m bored and need to create something, I’ll grab a small piece of lino and start with a small feature (four parallel lines usually work well for this), and see where it goes from there

Flipping the block by 180° and printing it over itself again gives a pretty fun effect, I’d love to mess around with it further in the future (as for the work in progress post flair) :)


r/Linocuts • • 1d ago

Single Layer Prints Library stamps

Thumbnail
gallery
42 Upvotes

I took up lino cutting to make book stamps for friends for Christmas. They turned out better than I thought and I definitely think I’ll keep with it!


r/Linocuts • • 2d ago

Reductions/Multi-Blocks A family portrait. Multi block print on paper.

Post image
660 Upvotes

r/Linocuts • • 1d ago

Reductions/Multi-Blocks I messed it up a little… still nice tho

Thumbnail
gallery
136 Upvotes

It’s not perfect but I tried:)


r/Linocuts • • 1d ago

Single Layer Prints Monarch Butterfly Lifecycle Prints

Post image
34 Upvotes

Been dabbling in linocutting/stamp carving for a hot minute now. I finally got a brayer and ink (water based I know 🤦🏻‍♀️🤦🏻‍♀️) and did some unserious prints of my monarch lifecycle stamps! Just felt like sharing and showing off lol.

I did the egg, caterpillar, and chrysalis on pink erasers and I did the butterfly on a larger piece of rubber. I think I’m still going to carve a smaller butterfly to match the size of the others more, but I had a lot of fun making all of them. I think I’m going to try making these into a multi-block print to get some color in there.


r/Linocuts • • 1d ago

Question Before the cut question

Post image
20 Upvotes

Here’s my drawing before transferring to the block and I have a question: how would you fill the legs below the breast to make them look shaded without doing large blocks of black? What I have plotted looks off to me. The legs are supposed to look white with shadow, versus the block of black on the chest and the much darker block between the leg and tail.

Thanks!


r/Linocuts • • 2d ago

Single Layer Prints Christmas cards

Thumbnail
gallery
281 Upvotes

This was so much fun, and I am pretty happy with how it turned out!

Added some color with aquarel, I am not ready to attempt a multicolor print just yet...


r/Linocuts • • 1d ago

Single Layer Prints Chef Dente from Pokopia

Thumbnail
gallery
7 Upvotes

r/Linocuts • • 1d ago

Question What went wrong ?

Thumbnail
gallery
19 Upvotes

Hi !
I am a newbie, i did a few lino before but not many and they all went way better than this. The result is super blotchy and i would love to know what more experienced eyes think of this and hear your advice.

What i think could be the problem :

- the tools ? For the small teeth, i borrowed a tool to someone because i had nothing small enough and it was not very sharp, which lade it hard to work with and maybe contributed to this mess ?

- the paint ? I used the same one before with no issue but this time when i poured it, some oil got out before paint and then there were some blobs. I did my best to even it out before printing but maybe it contributed ?

- the design ? Maybe i just took things too far out of my comfort zone and the design is just not appropriate to print ?

What do you all think ? Is this salvageable ? Or is it not and how to do better next time ?

Thank you 🙏


r/Linocuts • • 2d ago

Single Layer Prints My largest print to date. Need to carve the banners now

Post image
212 Upvotes

Lots of mistake made but still very happy with it. Need


r/Linocuts • • 2d ago

Single Layer Prints This years Christmas card

Thumbnail
gallery
59 Upvotes

r/Linocuts • • 2d ago

Single Layer Prints Unfortunately I think Christmas Pig is the weakest of the three so far.

Thumbnail
gallery
72 Upvotes

I just don’t think I got some of the silhouette quite right and left to many large shapes. Probably could have reduced the chin work some. Oh well, was still fun and they can’t all be winners. Christmas Rat will make up for it.