r/LilyGO • • 27d ago

SolarOS on LilyGo T-Deck Plus

Thumbnail
gallery
253 Upvotes

SolarOS turns the LilyGO T-Deck into a programmable pocket computer.

You get a graphical app launcher, a powerful shell, file management, text editing, SSH, Wi-Fi and Bluetooth, plus Python and Lua programming directly on the device. Its keyboard, trackball and touchscreen support everyday tools, community apps, music, and downloadable games and emulators - including DOOM and Game Boy. MeshCore messaging uses the onboard LoRa radio, while the T-Deck Plus adds GNSS positioning.

Read more:

Warning: The keyboard firmware must support raw matrix mode in order to function normally.


r/LilyGO • • Oct 18 '26

I made Area512, a pocket computer firmware for ESP32, and it now supports the T-Deck Plus! šŸ¤–

Thumbnail
gallery
200 Upvotes

Hey Reddit! šŸ‘‹

I'm hamachang, an engineer from Japan!

I'm excited to announce that Area512, the ESP32 firmware I've been working on, now supports the T-Deck Plus! šŸ¤–

Area512 turns your device into a retro-style pocket computer, allowing you to write code in FemtoRuby or MicroPython directly on the device and run your apps right away!

If you're interested, check out the official website for more details!

https://engneer-hamachan.github.io/area512/

I've only just added support for the T-Deck Plus, so the documentation isn't quite ready yet. But if you'd like to give it a try, you can install it by following the instructions in the GitHub README! ※Since the keymap is a bit complicated, I recommend checking the keymap in the README first.

https://github.com/engneer-hamachan/area512

Thanks so much for reading!

See you around! šŸ‘‹


r/LilyGO • • Apr 02 '26

Artemis II on LilyGO

177 Upvotes

r/LilyGO • • Jul 26 '25

A tool made for Hadware Hackers, ESP32 Bus Pirate v0.3 – Speaks every protocol - UART, I2C, 1Wire SPI, flash, I2S, WiFi, Bluetooth... Support for T-Embed & T-Embed CC1101

Post image
175 Upvotes

Firmware that brings protocol exploration to the ESP32-S3, with built-in support for I2C, SPI, UART, 1-Wire, JTAG/SWD, smartcards, flash, IR, LED control, WiFi and more.

Full commands guide:Ā https://github.com/geo-tp/ESP32-Bus-Pirate/wiki

Repo:Ā https://github.com/geo-tp/ESP32-Bus-Pirate


r/LilyGO • • 13d ago

Hey all — I put together open-source firmware that turns a LilyGO T-Embed into a tiny LAN remote for 3D printers.

Thumbnail
gallery
151 Upvotes

What it does

  • Monitor multiple printers from the encoder + 1.9″ screen (status, temps, progress, ETA)

  • Basic controls: pause / resume / cancel / e-stop (with confirm on the scary ones)

  • Works withĀ Klipper (Moonraker),Ā Bambu Lab (LAN MQTT), andĀ PrusaLink

  • Optional webcamĀ snapshotĀ on the device (Klipper URL, PrusaLink snap, Bambu A1/P1 LAN JPEG)

  • RGB status bar:Ā green when things look good, blinks red on error/attention

  • OptionalĀ error alarmĀ beep (toggle in setup) when any printer hits error or attention

  • On-device setup site over SoftAP — no app store, no cloud account

Setup flow

  1. Flash from the browser (Chrome/Edge + USB)

  2. Join Wi‑FiĀ T-Print, openĀ http://192.168.4.1

  3. Connect the device to your home Wi‑Fi, then open the IP shown on the screen

  4. Add printers (or scan the LAN) and you’re in

Controls (on device)

  • Turn encoder → browse fleet / flip detail pages

  • Short click → open / actions

  • Long-press encoder (~0.7s) → back to the list

Links

Still early — discovery, cameras, and Bambu X1 streaming have limits — but the core ā€œglance at the print from your pocketā€ loop is working for me. Feedback and PRs welcome.

Happy to answer questions about hardware, flashing, or which printers you’re using.


r/LilyGO • • Nov 04 '25

Gameboy emulation on the T-Deck plus

138 Upvotes

I've been trying to port over a gameboy/gameboy color emulator pver to the LilyGO T-Deck. Here is my progress so far.


r/LilyGO • • Jul 14 '26

Take a look!

Post image
115 Upvotes

r/LilyGO • • Mar 09 '26

It’s here! What should I do first?!

Post image
112 Upvotes

Should I install Bruce first? Any advice welcome! I also have a NRF24L01 module to add to it too. Excited to sink my teeth into this


r/LilyGO • • Feb 03 '26

Added new antennas today on the T embed

Post image
110 Upvotes

r/LilyGO • • Sep 09 '26

Play all your favorite games with Meshpunk now with meshtastic!

Thumbnail
gallery
105 Upvotes

Meshpunk for the t-deck now supports meshtastic! It can be downloaded from the app library and you can swap between meshcore and meshtastic whenever you want!

https://github.com/PhilMo6/meshpunk/releases/tag/v0.4.0


r/LilyGO • • Jun 27 '26

Brute force

Post image
103 Upvotes

So my dad phone got locked and it required a pin code 4 digits to be specific. Now im trying to unlock it using the brute force /attack using a text file containing 10,000 PIN code (0000-9999) its been running for 170min šŸ˜… i hope it works.
Btw the phone stopped showing the numbers when the tool typing it but i can her the sound of the keyboard and i see the message ā€œwrong PINā€ i hope it just a glitch its actually typing the codes not just a sound
The delay between each code is 2.5 sec.
Which mean it will takw around 7 hours to try’s them all.
Wish me good luck, ill post and update when its done.


r/LilyGO • • Aug 29 '25

Amplified T-Deck is Complete!

Thumbnail
gallery
102 Upvotes

I just finished my Amplified T-Deck I’ve been working on! I’m excited to take it for a spin tonight!


r/LilyGO • • Aug 20 '26

The T-Display K230 Kit is finally here! šŸŽ‰

Post image
87 Upvotes

r/LilyGO • • Sep 28 '25

T-Lora Pager Attachment

Thumbnail
gallery
87 Upvotes

4 in 1 attachement I made CC1101, NRF24, IR transmitter and IR receiver.


r/LilyGO • • Oct 04 '26

LakeShark update: ESP32-P4 handheld scanner, lots of new RTLSDR features and P25 straight off the LR2021 LoRa Chip

Thumbnail gallery
83 Upvotes

r/LilyGO • • Apr 30 '25

Is is Coming boyzzz!!!

Post image
83 Upvotes

Thank you Lilygo for providing me such a great device!!


r/LilyGO • • Sep 20 '25

Is the Lilygo Pager useless out of the box?

Post image
78 Upvotes

A number of questions about the Pager straight out of the box:

  1. The orange shift key at the bottom left of the keyboard doesn’t work. I can’t select numbers/special characters to input my WiFi password.

  2. I can’t change the date and time in settings.

  3. It appears to have a stand alone LoRa communicator ā€œpageā€ where you theoretically can send and receive messages. Does this work without Meshtastic or Meshcore? How?

  4. When will Lilygo update the firmware next? This device has the potential of being better than the T-deck.

  5. Anyone developing cool stuff for this device? I’d love to send/receive text messages via Bluetooth from my phone. Maybe even take calls (it has a microphone and speaker).


r/LilyGO • • Jan 08 '25

First boot of Marauder on T-Embed-CC1101

Post image
78 Upvotes

I hope to have this functional enough to share with folks soon. Special thanks to LilyGo for providing me with an engineering sample so I could get this running! šŸ™ŒāœØ


r/LilyGO • • Aug 05 '26

10, 9, 8, ....

76 Upvotes

I can't get Wifi to work yet.. I don't have that damn qwiic cable to flash.. fortunately I have UART->USB converter.. but unfortunately both my samples came without firmware flashed on the ESP32-C6 (or it just lost its firmware during its shelf time šŸ˜„)


r/LilyGO • • May 11 '26

Astronomy Micro Station

Post image
73 Upvotes

Astronomy Micro Station for LILYGO T-Display S3 Pro

A standalone astronomy display for the LILYGO T-Display S3 Pro (ESP32-S3).
Tracks the sun, moon, and light conditions — sunrise, sunset, golden hour, blue hour, twilight phases, moon phase and illumination — across four touch-navigated screens. Data fetched from ipgeolocation.io and cached locally for offline use.

https://github.com/sfrechette/astro-micro-station


r/LilyGO • • Sep 06 '26

The T-Display P4 works as a Gameboy Color Emulator

Post image
72 Upvotes

I have these devices (both the sx1262 and LR2021 variants) to use custom Meshcore firmware with. But given they're expensive devices that are limited to running the CPU at 360mhz with the screen on, I figured surely there's more we could do with them. Enter Claude AI and several hours of vibe coding later, we have a working Gameboy Color emulator on the P4. I can confirm it plays Halo Combat Devolved, Super Mario, and various GBC PokƩmon games just fine. (SD card formatted to FAT32 essential.)

Firmware release and instructions here: https://github.com/pelgraine/Meck-P4/releases/tag/v0.8


r/LilyGO • • Jul 18 '25

Modded my T-Embed CC1101 after breaking the original housing

Thumbnail
gallery
72 Upvotes

So, after accidentally stepping on it, I decided to do some mods:

  • 3D printed housing with a relocated back button

  • external antenna mod

  • a slightly better NFC antenna

  • GY-NEO6M V2 GPS module

  • the power and reset buttons are accessible at the back cover

(and please excuse my crappy right-angle antennas)


r/LilyGO • • Sep 12 '26

LakeShark moved to the LilyGO T-Display-P4 (ESP32-P4) - runs P25, POCSAG, ADS-B, FM and a MeshCore node on one handheld

Thumbnail gallery
68 Upvotes

r/LilyGO • • Jun 25 '26

InkHUD UI in Meshtastics with map on the T5S3

68 Upvotes

r/LilyGO • • Jul 19 '25

Bruce Bann0r multimod protec case

Thumbnail
gallery
68 Upvotes

just some early prototyping of a 3d printable t-embed protective case with 2 holes for antennas.