r/LangdonTactical • • 15h ago

Langdon HK P30SK LEM 4.1 CDA

Thumbnail
gallery
17 Upvotes

The bottom P30SK LEM was purchased in 2022 from Langdon. I converted it to 4.1 CDA myself. It was my carry gun up until about a year ago. I retired it to practice gun status because it has had well over 150,000 rounds thru it (documented). She has had several broken "wear" parts during that time. Two gray guns triggers, two trigger bars, two hammer struts, two recoil assemblies, and several nickel sear springs and cocking piece springs. I can say that in 150,000 rounds, I had ZERO issues with Langdons optic mounting system.

The P30SK above it, I purchased used in like new condition. And sent the slide out to Langdon for optic cut. Slide came back in a reasonable amount of time. Langdon now exclusively offers nitride coating for their HK cuts. The cut and the finish look excellent.

The second picture includes my full-size P30 LEM from Langdon, which was also purchased in 2022. She has had her internals coated. Great gun. I have had zero issues with it. It does not have quite as many rounds thru it as the sub compact. And my HK45C LEM.

The third pic is my complete carry lineup. Top gun is my current carry gun optic cut P30SK LEM 4.1 CDA with coated internals. The bottom left is my practice gun. I use this gun for all my practice and training. So as not to put as much wear on my carry. And the bottom right is my backup gun. It is used if I am going to carry a backup. Or if either my practice or carry gun go down.

HK has discontinued LEM action. So, while I am still carrying these, I am on the lookout for a new carry candidate. So far, I have been looking at Beretta PX4 Compact Carry and CZ P09C


r/LangdonTactical • • 2d ago

92 OP Hammer Restock ETA?

2 Upvotes

(yep, sorry, yet another restock post)

I've got an M9A1 that I'm turning into a suppressor host. And an M9A1 can't have suppressor height sights, so that means an optic.

I've ordered an LTT Elite slide from MGW, so I have a new one to send in for the LTT RDO cut. The frame is mostly stock, except for a Beretta steel trigger and skeletonized hammer (can't remember which one, other than it's an OEM part).

So now the question is: start with just the slide, or the entire pistol? I'd rather get a matched set of parts (LTT OP bar and hammer). If it's going to be a while before OP hammers are back in stock, then it makes more sense to get the slide done now.

And yeah, I realize I should have just sold the M9A1 and bought an LTT Elite. Too late. But hey, this way I keep the same 92 I've had for over a decade.


r/LangdonTactical • • 4d ago

92sday

Post image
25 Upvotes

Might need to tune up and replace some springs for the next season. I finished my USPSA journey this year in open minor and I'm very pleased with this gun. Might run LO next year with it.

I think I have 5,000 RDS through it easy.


r/LangdonTactical • • 5d ago

What should I buy?

Post image
28 Upvotes

I have this beautiful 1991 92fs And would like to Get some stuff from ltt to make her shine. I want it to have the best action possible while not sacrificing reliability Also , I'd like to keep my original hammer ( though open to changing if it will make a significant difference)and keep all visible parts black. Any suggestions would be greatly appreciated.Thanks , guys.


r/LangdonTactical • • 7d ago

PX4 Trigger Job in a bag questions

Post image
12 Upvotes

For the longest time my sheriff didn't allow modified guns on CCW licenses. Forcing us to carry bone stock handguns

Thai restriction was lifted and I got myself the trigger job in a bag.

I ordered it with an 11# hammer spring and the match hammer.

However it arrived with an extra hammer which has me confused. The hammer installed in the trigger group is skeletonized and the extra hammer is solid, like very solid. Not hollowed out but the heaviest hammer I've ever seem for these guns.

Then I installed it however, my drop safety worked normally and didn't need any fitment on the OP trigger bar.

It only came with the one spring installed in the trigger group so I assume that is the 11# spring.

I tried contacting LTT twice but didn't gat any answers

So did I install the right hammer?

Do the hammer springs come pre installed?


r/LangdonTactical • • 12d ago

Brenden’s Blaster vs 92 Elite with NP3

Thumbnail
gallery
24 Upvotes

Been thinking of a Christmas gift for myself and I’m between the Brenden’s Blaster and the 92 Elite with NP3. Planning to get either one with a Holosun 507C. Brenden’s blaster is tad bit more expensive and has a ported barrel but I don’t think it has NP3. Thought about doing the carry bevel package but can’t quite figure out what makes it nicer. Wanted a good opinion on both sides.


r/LangdonTactical • • 11d ago

Is the LTT Jonah’s Spectre superior to the the Elite II in some sense? I guess in particular CCW

Thumbnail reddit.com
1 Upvotes

r/LangdonTactical • • 14d ago

P30sk restock

7 Upvotes

Does anyone know how often Langdon gets new stock of pistols specifically the p30sk? I see they're currently out


r/LangdonTactical • • 17d ago

Question about the mags rule

2 Upvotes

I was looking at the p30 da/sa pistol on ltt and saw in the Firearms Purchase Policy that the order will be cancelled if the mags exceed the state limit. I live in VA and the limit is 15 rounds as of July 1st but there is a court injunction that blocked it for now. The p30 comes with 17 and a 20 round mag so would I be good to go and buy this?


r/LangdonTactical • • 19d ago

Mag getting stuck

4 Upvotes

I noticed during dry fire that some of my mags are getting stuck after I press the mag release, sadly while running a Classifier it happened and messed up my run.

Any suggestions, what do I need to check? I'm currently running the mags that came with the pistol from LTT with the NP3 coating and 2 mecgars all black.


r/LangdonTactical • • 20d ago

CZ P09C

2 Upvotes

Considering picking this up and interested in what others think of the pistol. The compact specifically.


r/LangdonTactical • • 22d ago

Question about comps on a 92 threaded barrel

Thumbnail reddit.com
1 Upvotes

r/LangdonTactical • • 28d ago

Question about usp compact restock.

3 Upvotes

Hi just wondering if there might be a restock of the usp compact 9 soon was looking at one locally and was going to send it in but if there might be a restock soon I’d just wait.


r/LangdonTactical • • Oct 20 '26

Px4 Acro footprint optics

2 Upvotes

Just picked up a px4 gsd from LTT and I am debating getting the new Colt optics Mrs-1 or the lead and steel pb-k. Can anyone confirm proper fitment for either of these optics with the LTT acro plate?


r/LangdonTactical • • Oct 19 '26

Getting the ports dirty AF

Post image
38 Upvotes

Let's build some nasty stuff around those ports 😜😜


r/LangdonTactical • • Oct 13 '26

LTT 92g Elite RDO (RMR) Optic

4 Upvotes

Looking for input on SRO vs RMR HD for an LTT 92G Elite RDO.

I keep seeing more SROs mounted on these in pictures, but I’m a little worried about putting the more fragile optic on a full-size, relatively heavy pistol that will see real use. Wondering if the RMR HD runs fine without ejection issues and if it’s preferred for bag carry.

This is my only full sized pistol and I will run it suppressed, bag/body carry, and nightstand gun.

Which would you run and why?


r/LangdonTactical • • Oct 06 '26

Gotta show my patch !

Post image
32 Upvotes

r/LangdonTactical • • Oct 04 '26

Getting some quality time

Thumbnail gallery
31 Upvotes

r/LangdonTactical • • Sep 29 '26

Finally about to purchase. Can't decide. I love both equally

Thumbnail
gallery
42 Upvotes

The black will not come with optic. So that's not a deciding factor


r/LangdonTactical • • Sep 28 '26

M9a1

6 Upvotes

I'm looking to see if it's worth sending my M9A1 to get worked on (optics cut, trigger job, etc). Right now I run my Glock 17 with an acro at competitions, but I love shooting my Beretta so much more even without having any work done on it.

Has anyone sent one in? Was it worth it?

Thanks!


r/LangdonTactical • • Sep 28 '26

Regarding RDO Cuts with 92FS

3 Upvotes

If I were to send my Beretta 92FS slide to LT would that be a worthwhile investment?

As I understand it, they wouldn’t be adding the heightened rear or front sights due to the FS’s nature so I’d only be getting it cut.

I plan on doing either a Trijicon SRO or Holosun 507 Comp to make it my ultimate CCW.

Theoretically, it’d be 375-400 for them to cut and then about 500$ for the 507 Holosun so in total almost a thousand dollars.

For additional context I have installed the TJIB, Match Hammer, Grips, Volker Flat Face Trigger, and just now ordered a Volker Tracker Takedown Lever, and Volker enhanced slide stop. So, I’m a bit invested in my 92FS.

Curious to hear what you think and I appreciate any insight you have about it.


r/LangdonTactical • • Sep 23 '26

Teaser

Post image
22 Upvotes

Based on the short vid on IG, any educated guesses on what platform?


r/LangdonTactical • • Sep 15 '26

First Beretta

Post image
44 Upvotes

r/LangdonTactical • • Sep 15 '26

Is the LTT PX4 Storm overhyped?

Thumbnail
reddit.com
9 Upvotes

r/LangdonTactical • • Sep 13 '26

92s out of stock

6 Upvotes

Was just browsing and noticed that all 92s are out of stock. That makes me sad, but my wallet happy.

I showed enough restraint that other folks saved me from a bad decision. Nice when that works out.

Now to refresh the page until the restock!