r/LandroverDefender • u/soasztruning8 • 25m ago
r/LandroverDefender • u/ScandiLondon • 22h ago
Radio
I run a 2013 defender. Radio is giving up on me. I want to “upgrade” it, but I don’t want to cut the dash up putting in a double din unit and remapping buttons. I want to keep it somewhat looking like it was when it was made.
So here’s the question, what’s the best radio with car play solution? Should I pump a big standard radio and get a windscreen suction car play screen and feed a cable somewhere, go for one of them rear view mirror things (that maybe don’t let the sun visors open?), one of them radios where the screen sort of comes up and flaps up? Is there a radio that just fits the original hole that’s quite good?
I went to Halfords and couldn’t find anything I wanted. That’s so far the extent of my research.
TLDR - best current radio for a 2013 defender?
r/LandroverDefender • u/SoupEfficient563 • 1d ago
Should my front wheels both point the same direction ?
Obviously I know they should. But it drives fine and I only noticed when I looked at this photo.
What is causing it and how can I fix it ?
r/LandroverDefender • u/Boquillas_Mule • 1d ago
Mod sales website
Tried to research this subreddit before posting but did not find any posts about mod-sales.com. from what I can tell the Brits take better care of their surplus vehicles then the US and unlike govplanet Humvees, a lot of these Defender wolves seem to be in pretty decent shape. So long as it meets the import age requirement, I take it there are no issues buying one and getting it brought over to the US. Any chance anybody here has experience with past British MOD Defenders?
r/LandroverDefender • u/Plastic-Injury8856 • 1d ago
Any problems with the sunroof?
reddit.comr/LandroverDefender • u/LifeKnown1711 • 2d ago
What is this next to my 2025 Defender reverse cameras lens?
Sorry about the dirt…
r/LandroverDefender • u/Far-Guarantee-5182 • 2d ago
cigarette lighter issues
Bought a new cigarette lighter socket for my 300 as the old one (first pic) was rusted inside and not working. Bought a new one, but seems to be a wrong part as it has an earth to the bulb which the old one didn’t have? Not bothered about the bulb anyway and just connected the socket itself but is not receiving any power. Anyone know why?
r/LandroverDefender • u/Interesting_Cheek989 • 2d ago
So my mechanic advised me to get rid of the spacers and oversized tyres and go back to the original size wheels! I think it takes the agressive look away but if its causing issues! The pic with the tent is the most recent
r/LandroverDefender • u/Unfair-Resolution-92 • 2d ago
Belfast defender 110 - cry for help
I have filled my defender until it clicks every time( 110, ex pickup extended tank, roughly £175 for a full tank) but today, instead of a click it threw about £20 or so at high speed onto the spar floor..
Long story short - can anyone please help me and fix this before Thursday? It might be a breather pipe, might be a seal gone around the pump - either way, I’ll stay loyal to whoever can fix it on short notice!
Any help will do ❤️
r/LandroverDefender • u/No_Tomato_2106 • 4d ago
Any Defender 110 owners in the Houston TX area?
I'm seriously considering giving up my classic G Wagen for a Defender, but I'd really love to look at one in person, possibly go for a ride to see how it truly feels to be in one. I know it's weird to ask to meet random strangers on the internet, but since when did that ever stop anybody lol
Edit: I'm looking for the classic version
r/LandroverDefender • u/userm5190 • 4d ago
Footwell repair suggestions?
Have ground back as much rust as possible. The pitting seems to be deep. I’m hoping I will be able to repair the pinholes and pitting with epoxy or steel putty but looking for opinions on if the damage is beyond that?
There is no rust on the underside.
Thanks in advance
r/LandroverDefender • u/LumpySleep8044 • 5d ago
How strong are the steps on the old defender?
Very if a bad mechanic can lift the truck from them... At least he got one side on the chassis.
r/LandroverDefender • u/Interesting_Cheek989 • 5d ago
Anyone know of what issues the oversized wheels and spacers cause?
r/LandroverDefender • u/Grip_it_and_rip_it_ • 5d ago
Overland/4x4 YouTube for women
I’m starting a channel and I would absolutely love any negative or positive feedback.
I want to create a place for women to get dirty outside, and I want to encourage them. I get a lot of questions “how can I get my wife to do that” and I think my cosier style videos might encourage women that it can be fun and it doesn’t need to be rock music and intense laning 😆
Please message or comment any advice :)
Kelly
r/LandroverDefender • u/No_Tomato_2106 • 6d ago
Real life experiences of daily driving a 110?
reddit.comr/LandroverDefender • u/InnerLine5791 • 6d ago
Starting issue (again)
About a year ago I had an intermittent starting issue with my 2001 TD5 van. I'd press the immobiliser fob, key in and turn to position 2, no engine light or glow plug light would illuminate on the dash, car would choke but wouldn't start. I also can't hear the fuel pump prime. Wouldn't start a couple of times and whilst on a trip through Europe it died whilst on the motorway/ freeway. I believed I isolated the issue to the main relay.
Each time it wouldn't start I would jiggle the connection or plug in a fresh relay and it would start normally. Took it to an auto electronics specialist but at this point it was starting as normal and wasn't throwing any codes.
We couldn't get the fault to replicate but he did identify the connections to the relay were loose. He tightened them and wired in a bullet connector to bypass the relay should I end up really stuck somewhere.
Subsequently I guessed this was the issue. Managed a two week trip through France covering around 2000miles in 35 degree heat faultlessly and has been absolutely fine since. Two days ago I went to start it, heard a small pop and now the exact same fault seems to have developed. I've changed both relays under the drivers seat and tried the bypass on the main relay. The fuses for the alarm, fuel pump and main relay are intact as is the starter. I've checked the ECU terminals for oil and they are absolutely clear. I've disconnected the battery to try and reset the ECU and still nothing. At this point im running out of ideas.
r/LandroverDefender • u/Melodic_Sandwich1112 • 6d ago
Rear Crossmember Bolt Size
I am about to install a rear step from ORE on my 2008 Puma, as per the video here. I see now when the former owner had the crossmember changed they didn’t put the short metal plate with three bolts back on. That’s fine as the step replaces it, but I need to know the dimension of those three bolts to secure replacements.
I emailed ORE but got no response; does anyone happen to know the dimensions?
r/LandroverDefender • u/warmachine6845 • 7d ago
My Winnie Girl
My Winnie thinks I’m cheating on her. She’s setting on me from the front seat.
r/LandroverDefender • u/DeltaEchoOneFive • 8d ago
1999 Defender 110 TD5 Hard Top & 2008 Defender 110 Puma SW - Nuts & bolts list
I'm about to start a full strip and rebuild of my 1999 Defender 110 TD5 Hard Top 3-door and my 2008 Defender 110 Puma 2.4 Station Wagon 5-door.
Does anyone know of / have a full list of the exact sizes and quantities of all the nuts, bolts, rivets, etc for everything except the engine and drivetrains (which are going away for a complete refurbishment).
I'd like to buy everything either in anodized black, or have it anodized before I start the rebuild.
r/LandroverDefender • u/Spirited-Clothes-158 • 8d ago
What is missing and how important is it? TD5
I just popped under to have a look at the he transfer box and noticed that a bolt seems to be missing. Trying to work out from the Haynes manual and a bit of Chatgpt what is missing and how important it is?
Front of the engine to the right, transfer box and rear to the left.
Thanks in advance!
r/LandroverDefender • u/GoodMissionGuy • 8d ago
Spotted this beauty…
… on a recent trip to Bainbridge Island. Love the color scheme.
r/LandroverDefender • u/JSmileyboy • 8d ago
300tdi Defender 110 Front Door Rebuild — What Seals, Window Channels & Trim Am I Missing?
I’m getting ready to go through both front doors on my 1999 Defender 110 300Tdi (LHD) and would like to basically refresh/rebuild all of the worn seals, window guides and trim while I’m in there.
I attached a video showing what I’m dealing with.
Two main issues:
Both front windows rattle quite a bit. The glass has movement in the door, so I’m assuming the felt/glass-run channels are worn out. I’d like to replace all of the window channel/felt pieces rather than just trying to tighten something temporarily.
I can see daylight from inside the truck at the lower/front portion of both front doors, around the A-pillar/hinge-side area. You can see the gap in the video. I’m trying to figure out what seal or trim pieces should actually be there. I’m not sure if I’m missing an aperture seal, lower door seal, corner piece, inner trim, or something else.
Since I’m taking the doors apart anyway, I’d like to do them properly.
Can anyone familiar with the older 300Tdi-style Defender doors tell me what parts I should order for a complete refresh?
I’m thinking I probably need:
Front and rear felt/glass-run channels for each front window
Upper window channel
Inner and outer waist/window scraper seals
Any lower glass guides or retainers
Main door aperture/weather seals
Any seals or trim pieces around the hinge/A-pillar area that are missing in my video
Door-card clips/fasteners
Anything else that commonly causes these doors/windows to rattle or lets air/water through
If anyone has Land Rover part numbers or a complete door/window rebuild kit they’ve used, that would be especially helpful.
I’m trying to make the doors seal reasonably well and get rid of the glass rattle without converting to Puma doors.
Thanks!