r/Kseries • • May 04 '26

K24 Swapped Honda Acty

Thumbnail
gallery
477 Upvotes

Here’s my k24 swapped Acty. It’s basically a stockish full accord swap with a 02-04 rsx k20 harness and a hondata. Makes 160whp. It’s terrifyingly fun.


r/Kseries • • 3d ago

The Before and After; First K

Thumbnail
gallery
252 Upvotes

Been H22 swapped since 2009 and had this 1994 Accord since highschool in 2004 when my dad handed over the keys. My dad bought this Accord back in 1996 as a second owner. I lost him back in 2019. Wish he was here so he can drive and get a taste of the K series. Build list is in the comments.


r/Kseries • • May 04 '26

K24 swapped Acty

242 Upvotes

Here’s a small little pull. It went from 0-60 to what previously would have taken about 25 seconds in about 5 lol. I’m trying to make it to a kei truck show at the end of the month so I’m trying not break it before then.


r/Kseries • • Jul 30 '26

Need direction on building my K24.

Thumbnail
gallery
231 Upvotes

Hi guys, I'm planning to look at 350-450whp for my K24RBB4 street car and I wanna know what are the things that I should have before I can make those numbers. I tend to drive the car hard so I have no problems spending a little more on better parts to make sure the car can be somehow reliable. I've built a 4AGE Turbo twice and people have stressed on the internals, but I know the K24 is a much more durable engine so I'm not sure how much I can get away with it.

What Turbo and ECU do you guys reccomend? Do I have to extensively get forged internals to run 400hp?

Car now currently has ;

K20A Type R Oil Pump

DC5 5 Speed Gearbox

Stock ECU

Stock Cams

Stock Internals

Stock Injectors

Stock Driveshafts


r/Kseries • • Jun 16 '26

Finally awake

Post image
197 Upvotes

Finally, after 1 year of slumber she's finally awake. Tuning in a couple of weeks. Shooting for 500+.


r/Kseries • • Mar 17 '26

Part delays killing my motivation

Post image
196 Upvotes

r/Kseries • • May 30 '26

My K swapped 74 Toyota Celica

Thumbnail
gallery
190 Upvotes

I run a small business that is focused on repair and fabrication out of my home garage. I also designed and fabricated a few things for my K-swapped Celica. It has been slow progress with my little family expanding, but its better than no progress at all. If you guys are interested in the louvered coil pack covers and would like to support a small business I sell them here on my etsy. I hope to make more progress on the build and hone my skills in the years to come. I appreciate you guys for viewing 🙏🏽K-series Louvered Coilpack Cover


r/Kseries • • Dec 30 '25

Kswapped wrx

Post image
188 Upvotes

Mornin fellers, not sure if this is the right community but just curious to see what you guys recommend ecu wise for a k20 into a Subaru chassis.


r/Kseries • • May 14 '26

K20A3 to A2 Frankenstein

Thumbnail
gallery
187 Upvotes

r/Kseries • • Oct 28 '25

Kswap 67 Mustang

Post image
178 Upvotes

Apologies if this may have already been posted. Thought this was too cool to not share. https://www.reddit.com/r/projectcar/s/OChmw44Oqj


r/Kseries • • Jun 26 '26

Modding the red headed stepchild of the K family

Thumbnail
gallery
175 Upvotes

Hello all. Something a little bit different for you on this fine Friday.

I drive a 2008 Acura RDX, with a K23A1 factory turbo motor and SH-AWD. It's a bit of an outlier, as it was the only turbo K motor until the newer Type R/Accord was released. In factory trim, it makes 240hp/260tq a decent respectable number for a mid 00s SUV. To the wheels, it makes about 190whp/240twq due to drivetrain loss (about 25%) from the auto trans and AWD. The K23 is unique among other K motors in that the transmission bell housing is the only one with that specific pattern, so no swap options exist. This also kept the K23s from becoming a popular swap option.

I have since added pretty much every bolt on available for the car...RV6 catted downpipe, ATLP exhaust, custom front mount intercooler & intake, ported intake manifold with matched J37 throttle body, DW 1000cc injectors, DW300c fuel pump, TurboSmart dual port BOV, and Hondata Flashpro. The car currently sits on the most aggressive reflash. If I had to guess, it's probably making about 260whp/320tq. I've clocked a 5.6 0-60, and a 14.18 1/4 mile with my Dragy.

The car is sitting on BC coilovers, SPC camber kits, and a Progress rear sway bar. For grip, I have 19x9.5 SSR GTX01s, with 275/40s all around.

I just hit 235k miles last week. I plan on pulling the motor shortly and doing some maintenance....timing components, water pump, and all the external seals. All this is in preparation for next year. I have a spare factory turbo that will be sent out and have both the exhaust turbine and compressor replaced with larger units, and the housings machined and ported to match. I'll basically be maxing out the factory turbo frame. The car will then by dyno tuned for both 93 and e85. I'm hoping to hit 300whp with 93, and whatever more I can make with the ethanol.

My goal is to hit 12.9 or lower in the 1/4 mile. While not fast by modern performance SUV standards, it's a blast to drive and a hell of a performance value. You can pick up a clean example for about $5k these days, and another $5k in parts will get you most of the performance upgrades. If I decide to keep the car long-term and retire it from daily duties, I'd love to do an actual aftermarket turbo build and make some real power.

That's all for now....I'll definitely update next year once the final power numbers are in.


r/Kseries • • 29d ago

Turbo k24 swap in a Honda Acty

153 Upvotes

I had it going NA for like 6 months but I think it’s time to make it even more ridiculous lol


r/Kseries • • Apr 18 '26

$1000 well spent!

Thumbnail
gallery
151 Upvotes

Picked up this baby today. K24a2 hybrid/ Frank motor with a k20a2 head. 133k miles on the block, unsure about the head. Type S oil pump already installed, a deal of a lifetime. Turns over like nothing, crazy clean valve train and cams. I’m super excited to tear it down, rebuild it, pair it with a type S 6 speed trans and throw it in my Del Sol. Transported in my buddy’s Honda Fit as shown in the last picture.


r/Kseries • • May 05 '26

17 year olds K24a2 swapped FD

Thumbnail
gallery
114 Upvotes

first k swap project, just wondering how to keep it reliable and make it sound good/ quiet. I plan to stay na for now but go small single down the line. i appreciate any opinions you guys got for me.


r/Kseries • • Jul 09 '25

Bought Civic Si - Found out its Z1 swapped.

Post image
101 Upvotes

Hey guys, as the title says... I bought this 2007 Civic Si, a car I've wanted for a long time and this one was a good price and pretty clean for the midwest. Looking at a few things I noticed the thermostat housing is different than a diagram I was looking at online. Come to find out the car has a K20Z1. I verified that the ECU is the original Si. Intake manifold appears to be Si and still has the DBW. I am kind of wondering about the transmission, or if it matters. All stickers are missing from the transmission, is there another way to identify it? It is a 6 speed.

Car runs and drives good. I guess maybe the Z3 was blown at some point and maybe a Z1 was easier to find? Kind of surprised to find this. Anything else I should take a look at?


r/Kseries • • Oct 03 '25

She’s ready🥹

Thumbnail
gallery
95 Upvotes

K24A2 for my S2000


r/Kseries • • Nov 19 '25

New to me JDM k24

Thumbnail
gallery
90 Upvotes

Hey people I just bought a JDM K24a. It was sold to me as a k24a RBB2 high compression motor from the tsx. Just wanted to get any opinions on it make sure I got what I ordered. 3 lobe is good right ? Input welcome thanks


r/Kseries • • Apr 18 '26

Hopefully the last time it’s coming out

Thumbnail
gallery
88 Upvotes

r/Kseries • • 24d ago

K20/K24 16PSI E85 7875 BB 🐌

87 Upvotes

K20z3 head with OG Skunk2 tuner 1’s
Stock 07 TSX block with Type-S oil pump
441whp 314wtq Dynojet


r/Kseries • • Apr 04 '26

K24 turbo CRX first startup

87 Upvotes

Finally... 100% garage built, been so long in the making so happy to see it finally started. A little smoke due to it being opened dumped to the floor from rhe downpipe lol and also first time the engine has started in probably 5-6 years

Lets. Freaking. Go


r/Kseries • • Aug 01 '25

All the electrical forever

Thumbnail
gallery
81 Upvotes

More to digitize.


r/Kseries • • Dec 02 '25

Almost to the finish line

Thumbnail
gallery
72 Upvotes

K24a2 paired to an rx8 6 speed


r/Kseries • • Jul 17 '25

Does this belong

Thumbnail
gallery
71 Upvotes

Does this belong here or classic mustangs ?


r/Kseries • • Jan 03 '26

My K24

Thumbnail
gallery
70 Upvotes

My basic k24a setup