force-break mod gets recommended online all the time, but honestly it is not some universal upgrade. i tried it on 4 different boards and the results were very mixed.
quick version of what it does: you add small cuts to the plate, or use a plate that already has flex cuts, so the board gives a bit more when you type. the goal is to soften bottom-out and make the feel less stiff.
EV63, already has a decent amount of flex. force-break just made it feel a little mushy and took away some of the crispness. for me, worse.
EZ75, pretty stiff stock. this one actually benefited. bottom-out felt softer, sound got a bit deeper, and the typing feel was a little more forgiving. not huge, but definitely better.
F97, already flexy in a nice way. force-break pushed it too far and made it feel kind of sloppy. lost the nice balance it had before. worse.
OG80, stiff stock board. this one improved too. it softened the feel enough to make typing on it more enjoyable.
so yeah, force-break is for stiff boards, not all boards. if the board already has flex, you are usually just killing the feel.
also, if you want more flex, i honestly think changing plate material first makes more sense than cutting up the plate you already have.
whats one mod people always recommend that actually depends a lot on the board?
I've had the EV63 since the end of April/first part of May and it's been at my desk at home ready to go at a moments notice.
I left the stock keycaps on for a while but then started experimenting with others and landed on the XVX Forged Carbon set to match the carbon fiber at the lip of the board. Now, be aware that the XVX set isn't fully set for a board of this layout so I used the appropriately sized keys for some of the modifiers, but the front legends don't match what the key is mapped to. So bear that in mind. I'm a touch typer so it doesn't really bother me.
In the time I've used it, the sound continues to make me so happy. It's poppy and creamy, the feel is fantastic. No hollowness has appeared.
There hasn't been any software or hardware issues, it's just simply worked the same as it has on day one.
I would tell you that I'm a much better gamer and I've outperformed my personal best, but honestly.....it didn't help. That's a skill issue. And I don't think IQUNIX can make me better haha. However in more skilled hands and fingers, I'm sure it'll be a great companion for many many hours, weeks, months, and years to come.
I wanted to give my opinion with the EC75, after using this keyboard intensively for over a month.
As I said, I've been using the EC75 for a month now for work, gaming (Fortnite) and general tasking 8-10h a day and it has worked flawlessly, no real complaints. I really like the switches it comes with, if you enjoy clacky switches: this keyboard will feel definitely satisfying lol.
If you were eyeing this keyboard, it has felt really good to play on and I can fully recommend it. I know it's a smaller thing, but I really like how lightweight it is, sometimes I end up moving the position of the keyboard around the table and this one is so easy to pick up, small thing that I'm enjoying very much.
whats one keyboard trend right now that you instantly roll your eyes at? this could be small screens, flex cuts that make boards sound worse, RGB overload, imitation of โluxuryโ features, or anything else that looks good on paper but in actual use case, offers nothing.
we want to hear from anyone here what they have had enough of, post your biggest keyboard pet peeves down below. do hold back.
weekend showcase thread, drop a photo of your current desk or keyboard setup in the comments. doesnt have to be an IQUNIX, doesnt have to be pretty, doesnt have to be "done."
A few phrases to get you started (pick one or invent your own):
The board you've been using this week
The corner of your desk you're most proud of
The "before" shot that needs a makeover
A setup that sounds better than it looks
Your cable management (or lack thereof)
parts lists in the comments are appreciated but not required. top comment by Monday morning gets a small IQUNIX gift card (promo code).
Can we get an aluminum mouse? Focus on light weight design and better switchesโฆ
TBH if you can replicate attack shark R5 ultra 8K that would be great. I love the hollow design and the feature they give with the web based software but better switches.
I am happy with my mouse, but yall knocked it out the park with the EV63 HE KB and would prefer to have the same brand of peripherals.
I got my fifth IQUNIX board this time. Since I got my item from my pocket, let me write some of my honest opinions about this board compared with other boards. This one was on a $120 discount from Amazon US.
To start with packaging, I need to say this: I love this bag. It is wonderful, preventing me from spending extra money ($30) to get my board a unfitting house. Also, other extra parts are well prepared too.
However, unfortunately, its plastic roof didn't make it this time either. They were bent and unstable. It felt like it was made of a cheap plastic slice. I metioned about this in the MQ80 reviews and IQUNIX told me they are planning an upgrade and I hope this isn't the upgraded version.
I personally prefer a mechanical keyboard to a magnetic keyboard because they have more options for the switch and their types, but once I experienced the Gravastar V60 keyboard, I realized I wasn't loyal to mechanical keyboards. I just didn't know how GOOOOOOOOD they are. So I looked for a keyboard that comes in a TKL layout, which will make my WFH life much better. I checked the 75% layout boards, but when you are working, easier access to the 9 keys above the arrows is really important when you are working (especially if you are a heavy Excel user). Most importantly, I was looking for keyboards that came from a reliable brand. My conditions led me to EZ80.
The one thing I feel sorry about this keyboard is that this keyboard is not offering the 'selectable-mount system' that other cheaper brands offer. This board is an almost $300 product, and I don't think adding this function will dramatically increase the price. I hope IQUNIX considers this function for their future products.
For typing videos, the compared board is Gravastar V60, which has a plastic body and PC keycaps. Compared to this one, EZ80 sounds more marbly and I think this came from the sold aluminum body. You will see what I mean when you watch the video. I wonder if giving PC keycaps to the EZ80 will make it sound softer or not (I think not due to its mounting system). Compared to V60, EZ80 feels like having a higer key pressure.
Enjoy the videos, and I will update the post if I find something to share with the community! P.S. to u/IQUNIXstore: what is the profile of the keycaps? I would like to change the half of the keycaps into translucent ones. I cannot find those from your website so I think I need to buy one by myself.
i keep seeing newer players crank their rapid trigger settings all the way down to the extreme limit because they think it makes them faster. in my experience, running it at the absolute minimum just makes your movement sloppy. if your finger twitches even a fraction of a millimeter while holding an angle, it registers a release and ruins your crosshair placement. i bumped my movement keys back up to a stable 0.15mm release and my counter strafing in cs2 got way more consistent. what sensitivities are you guys actually using in competitive?
been seeing he hype all over my feed, so i finally caved. most โgamingโ boards either look like toys but this one actually feels great. full alu case, and the lowest actuation feels really snappy in valorant.
still getting used to 60%, anyone else actually using this for comp?
monthly buying guide thread. New to IQUNIX or shopping a first one? Drop the following in a comment and the community will help you sort it out.
Budget (USD or local โ be honest)
Primary use โ gaming / typing / both / travel
Layout โ 60% / 65% / 75% / 96% / TKL
Switch feel โ linear, tactile, silent, HE/magnetic, or unsure
Wired or need wireless
ANSI or ISO
Anything else that matters (quiet office, Mac, PS5/Xbox)
The 2026 lineup at a glance:
EV63 โ Ghost in the shell โ HE 60%, $249, hot-swap EV63 โ flagship HE 60%, $169, hot-swap EZ60/63 โ gaming HE 60%, Magnetic X Ultra EZ75 โ HE 75% with arrows + function row EZ80 โ HE TKL-adjacent, the choice for CS2/Valorant grinders EC75 โ Entry level, HE 75% + wired MQ80 โ low-profile 75%, wireless, the travel board Magi65 โ low-profile wireless, BT/2.4G/USB tri-mode Magi75/96 โ low-profile wireless, BT/2.4G/USB tri-mode
IQUNIX team will weigh in. Owners of boards: tell new buyers what you went with and why.
I was recently given by Iqunix their EV63 hall effect gaming keyboard to review. Specifically, the configuration I received was the Violet board with the Magnetic X Ultra hall effect switches. Now, Iโm not a gamer, so this is not going to be a review of its gaming performance. This is purely a build and typing experience review. So here goes it.
The build quality is excellent. Itโs full aluminium, the aluminium is nice and soft to touch, and the whole thing just feels very very premium. The construction is beautiful and flawless. The violet colour is a really nice choice and is complimented really well by the carbon fibre accent. The ornate mechanical flair, however, is a bit much for me. But thatโs a very personal preference. And that ornate flair has been executed flawlessly nonetheless. I think itโs a massive improvement over the look of the EZ63. From the pictures Iโve seen of the EZ63, itโs really quite unrefined in the looks department. The ornate mechanical flair is more crude and garish and tacky, and the colours are also not great. The EV63 fixes those issues with a colour scheme that makes sense and a construction design that is much more sleek and refined and looks genuinely really good. I really canโt fault the looks and the construction of the board.
As for the typing experience, this is also excellent. It feels good. The switches feel about 40-45g and itโs a very pleasant pressure that most people will enjoy. Thereโs no gasket mount though, so itโs a solid bottom out. I do prefer a soft and bouncy gasket, but the boardโs still very pleasant to type on considering. For sound, itโs more difficult to make hall effect switches sound as good as mechanical switches. But these still manage to sound really good. This is probably one of the best sounding hall effect keyboards out there right now. They can never have the pristine and varying sounds that mechanical boards can have, but these come damn close. I will say though that the spacebar on this board does not sound good. Itโs very loud and thunky with a less consistent timbre than the rest of the board. But this was on my wooden desk. I tried it on my sofa and the spacebar sounded much better there, so you might find that it sounds better with a keyboard mat. But other than that, the board sounds great. And I would describe it as a lovely marbly sound.
Overall, itโs a very premium feeling board. Iโd say, in comparison with mechanical boards, the build quality is a 9.5/10, and the typing experience is an 8/10. In comparison with other hall effect boards, Iโd guess that theyโd be a 10/10 in both departments. And compared to its predecessor, the EZ63, the design seems a lot more cohesive and thought out. But the EZ63 does have 75% and 80% variants, which the EV63 does not. The EV63 could do with more size options just like the EZ series. And it could probably do with a better space bar too.
actually, in this hobby being an iso layout users, for me, is full time job. every time I see another beautiful keycap set hit the shelves, first thing I do? scroll down, just to confirm they really did include that big enter key. i swear, i spend more on adding the extra layout kits than i do on base sets themselves. big shoutout to anyone who's keeping their iso boards looking neat despite the inevitable struggle. what are your favorite sets that naturally support our layout?
I recently picked up an IQUNIX MQ80 and I'm trying to understand the engineering logic behind its power management. There seem to be three ways to "turn off" or disconnect the board, but the manual is a bit vague on the standby drain and wake-up triggers for each.
Could anyone clarify the differences between these three methods?
1. Long press Fn + Esc
My assumption: This seems to be a software-level "Deep Sleep" or "Soft Shutdown."
Question: Does it still draw a small standby current? How do you wake it up? (any keypress or only Fn + Esc once more?)
2. Switch to Wired Mode (Fn + 5) and then unplug the cable
My assumption: The board stays in "Wired Mode" logic but loses its data/power source.
Question: Since it's not searching for Bluetooth/2.4G, is this an efficient way to save battery?
3. The physical toggle switch under the Caps Lock keycap
My assumption: This is a hard "Kill Switch" for the battery circuit.
Question: I assume this has zero standby drain? Does it require a full re-initialization (pairing) when toggled back on, or is it instant?
Iโm particularly interested in which method is best for long-term battery health and minimum standby drain (especially since my unit was in storage for a while).
I may be missing it but I do not see a way to create a deadzone on the initial press on top, just on the bottom. I like putting a deadzone for the top to avoid accidental keypresses. I have it on some keyboards. Thanks!
We came across some old prototypes of the Hitchhiker and the Avocado colorways. ๐ฅ
It got us arguing in the office: If we were to do a "Retro Run" in 2026, which classic IQUNIX design would you want to see on a modern board (like the magi65)?
Drop a comment. If enough of you agree, I can actually bring this to the product team on Monday.
I'm one of the common low-profile obsessed users living on Mother Earth! Starting a year ago, I started my journey looking for & collecting a good keyboard in the market. And my personality (I call it object-analytic) loves comparing and finding & organizing what is better and what should be improved.
Today, finally my iQunix MQ80 arrived on my porch after finishing halfway around the world travel. I will start with explaining my first impression about this keyboard and then will take you to the in-depth comparison with other famous competitors in the market. For who do not love reading, go to the bottom; I prepared summary infographic for you!
First impression
When I opened the box wrapped up with the box tape multiple times, I could see the premium hard carrying case with the iQunix logo on it.
As an environmental scientist, what I like most about IQUNIX's package is that they are killing fewer trees compared to other companies. Well... they are killing something else for making this hard-shell case... Anyway, I think this is great packaging. Way to go, IQUNIX! Big clap!
It looked like this is an EVA hardshell case, which is very firm and solid. I can fly with the keyboard in the luggage inside the case for sure. I think this is the same case with the one for Magi75.
When you open the box, you will find a lot in the box. They put even more in the box compared to Magi75.
A quick-start guideline card & cute stickers
A nicely braided, color-matching USB-C cable
Extra Mac/Windows modifier keycaps
A soft, foldable cleaning brush (the Magi75 didn't include this!)
A 2.4GHz wireless receiver with an extension adapter
A 2-in-1 keycap and switch puller
The warranty card (don't lose this!)
What about the Keyboard?
Let's check the keyboard. The color I chose is moonlight silver.
Dust cover is pretty awful, honestly. Mine arrived warped and doesn't sit flush on the board. I usually have custom acrylic covers anyway, but compared to the thicker, perfect-fit stock covers you get with the NuPhy Air V2 or the Corsair K65 Plus, this one is a letdown.
Housing is heavy and beautiful. But compared to the NuPhy Air series boards, I cannot say this is a travel board. But I feel Magi75 has a finer surface compared to MQ80. I couldn't find which grit is used for Magi75, so why and how these two are different is a u/IQUNIXstore question.
Keycaps are thick, beautiful and well-made. My desk setup is pure white, so I love clean aesthetics that keep my workspace bright. The crisp, white PBT catches your eye immediately. The legends use a bold, clean Sans-serif font that offers great readability, accented by some cute novelty icons.
The accent piece on the right side of the keyboard is a great charming point; I like it so much. This red charm is a magnetic attachment with two prongs, so if you are familiar with 3D printing, you can print out something nice like a phone stand or some additional decoration.
LED strip, hmmmmm..., this is one on the left side. First of all, I'm not sure this minimalistic board really needed a giant LED light strip on the left side. Maybe a small dotted indicator on the corner or under-key illumination, like the Magi75, would have fit the aesthetic better. Well, I understand shares a lot of DNA with Magi75, and this LED serves as a differentiator. Despite all of these reasons, did you really need this?
This keyboard adopted the Kailh POM gold red switch, which guarantees soft and light typing with an actuation force of 40 gf. A lot of reviews mentioned that the MQ80 is more clacky compared to the Magi75. But not a lot of them told 'WHY,' encouraging me to do my own little research. Here is the reason: comparing the layers of these two keyboards, I found the MQ80 has a PET switch sheet between the IXPE switch pad and the PCB, while the Magi75 has a PET bottom case pad. In addition to this, the Magi75 has a gasket dampening ring, deriving a huge difference in the typing feel. So they are not super different but obviously different.
Iโve been using the Magi75 as my daily driver for a month now and love it (90% satisfaction). The remaining 10% of my frustration came from seriously ticking and rattling stock spacebar stabilizers. (IQUNIX support is currently working on sending me replacement stabs and wires. If you want to see how I modded out the rattle on my Magi75: Check this post!
Needless to say, I was worried about the MQ80's stabs. Fortunately, my fears were misplacedโthe stabilizers on this unit arrived perfectly balanced with near-zero rattle out of the box. Iโll still probably do some light modding (shimming or lubing) later just to perfect it, but stock performance is great.
(update)
Hi, everyone! I had a good sleep and came back with the typing video for about a minute.
These two keyboards have the same typing angle from the solid aluminum body and the same keycap profile.
To briefly say how they are different, Magi75 is more bouncy and thocky in terms of bottom feeling and sound. I believe this is owed to gasket dampening and a great mat over the PCB. So all the reviewers were correct!
My recommendation for choosing between these two will be I love clear linear typing with the solid base that makes me feel 'I'm typing.' ==> MQ80 I love bouncy feeling with easy typing of hours and hours ==> Magi75 No matter what you choose, you will never regret it!
Basically title. I'm in the deep of the custom keyboards and now want to try HE keyboards and thinking about EV63. However I want to use my own stabilizers, switches, keycaps etc and wonder if PCB and plate support PCB mount stabilizers or not.
I thought that the Violet version of the original EV63 line-up will be the most eye-catching board for this year. But looking at the new variants, the level of detail is simply mind-boggling.
I had the opportunity of trying the Cyber Blue one, here is my full review with some real-life photos:
In short: the same top quality materials and crazy structure with the multipart sides, but spiced up with the GitS theme. I love the keycap set of the Cyber Blue, but go with the Shell Core if you hate fingerprints. Mostly for gamers, optimized for performance, but also for enthusiasts enjoying the harder, more direct typing feel. Beside all the gamer features, the custom web-based software supports a mod-tap function, so you can implement your custom keymap and even SpaceFN.
Not for you if you like some flex, soft typing feel, or more than one extra layers beside your base one. Also a bit heavy for travel (1.2kg).