My ABS had been activating randomly at low speeds when braking, even in dry conditions where there was no obvious reason for it to kick in.
I thought it could be a number of things, but after checking the easiest possibility first, I found the culprit.
A split ABS ring on the driver's side front wheel.
It's actually really easy to check, so I thought I'd share in case it helps someone else.
How to check:
Jack the car up and remove the wheel. Start with the corner you suspect is causing the problem.
Locate the ABS sensor and remove it.
Look down through the hole where the sensor sits. You should be able to see the toothed ring (ABS reluctor ring).
Make sure the car is safely secured, the transmission is in neutral and rotate the hub by hand.
Watch the ring through the sensor hole as it rotates, looking for any splits or cracks.
These rings can rust and expand over time, eventually splitting. When this happens, it can cause the ABS to activate unnecessarily, particularly at low speeds.
If you can't see any damage, repeat the process on each wheel until you find the problem.
Hopefully, you'll find the culprit and it'll be a relatively straightforward fix: remove the hub and replace the damaged ABS ring.
If anyone needs advice on how to go about replacing one, feel free to ask and I'll do my best to help.
I'm no mechanic, just an average DIYer, and I managed to diagnose and fix mine myself.
Hope this helps someone!