r/Hydrology • • 5h ago

PE reverting to HEC-1 after previously modeling the same waterway with HEC-HMS?

5 Upvotes

Hi guys, hoping it’s ok for a newbie to the field of hydrology to ask a couple of questions. I’ve asked google but it gives different answers depending on how I word it *sigh*

I’m trying to understand what reason(s) might cause a PE to switch to using HEC-1 modeling for the same stretch of water way where they performed a study just 5 years earlier using HEC-HMS. At the time of the second study, HEC-1 was last updated 20 years prior (noted in the modeling parameters). Both studies were performed for the same purpose; just for two different groupings of buildings. Same property, same owner, same body of water.

Any ideas why a PE might revert to using legacy software when they were capable of using HEC-HMS and had previously done so for the exact same location?

TIA for any help!


r/Hydrology • • 6h ago

I need a help from a hydraulic/ hydrology engineer!! (Civil engineer major)

1 Upvotes

I need help with my project to design a stormwater drainage network in Madaba. I’m not sure how to choose the network layout, especially since I also need information from the municipality.
If anyone has experience in this field or can guide me and show me on where to start and how to develop the layout, I would really appreciate your help. I need to finalize this first stage before moving on to the calculations and detailed design, but I’m currently stuck.


r/Hydrology • • 15h ago

Replacing a Large Catch Basin With a Smaller One

Thumbnail reddit.com
1 Upvotes

r/Hydrology • • 1d ago

Advice for a student group pitch research project!

3 Upvotes

Hi everyone,

We’re a student team working on a pitch project focused on industrial water sustainability, specifically targeting Ultrapure Water (UPW) waste in semiconductor manufacturing. We want to make sure our engineering logic holds up in the real world and aren't overlooking obvious operational bottlenecks within this field!, So, here's just a quick run through of the current problem and our proposed solution.

The Problem:

Semiconductor fabs use massive amounts of Ultrapure Water (around 20–38 million liters/day for a typical large fab) to rinse wafers and clean chambers, and producing 1 unit of UPW takes roughly 1.4 to 1.6 units of municipal water. After use, this wastewater contains acids, bases, fluoride, copper/heavy metals, CMP slurry, and a whole bunch of other nasty chemicals. Because many facilities mix these streams or treat them too broadly, recycling becomes expensive and energy-intensive, especially problematic since many fabs operate in water scarce regions.

Our Proposed Solution:

Instead of treating wastewater as one mixed stream, we’re proposing an AI + IoT drain-line segregation and predictive maintenance system:

  • Real-Time Sensing: Low-cost IoT sensors on individual tool drain lines monitoring pH, conductivity, turbidity, TOC (Total Organic Carbon), and fluoride.

  • Tiered Routing: An ML model classifies the waste stream in real time and diverts it by quality. as in, sending mildly contaminated water to lower-tier reuse (cooling towers, exhaust scrubbers) and reserving energy-heavy UPW regeneration only for the cleanest reclaimable streams.

  • Chemical Dosing & RO Maintenance: The AI adjusts treatment chemical dosing dynamically and predicts Reverse Osmosis (RO) membrane fouling to optimize cleaning cycles.

  • Safety Failsafe: Includes a human approval step and an automatic fallback, so if by chance a model's confidence drops below 95%, the valve automatically diverts the stream to full baseline treatment so nothing slips past!

Projected Targets:

  • 10–20% reduction in treatment chemical and RO membrane operating costs.

  • +8% boost in fab water recycling rate (e.g., moving from 87% to 95%), saving roughly 400 million liters per year for an average fab. Rollout: Starting with a single non-critical pilot production line before scaling.

Where we’d love your honest feedback:

  1. Sensor durability: How realistic is deploying these inline sensors (especially TOC and fluoride) in harsh fab drain lines containing HF or abrasive CMP slurry without constant calibration/fouling issues?

  2. Retrofitting: In existing fabs, are drain lines already physically separated enough for automated valve diversion, or would retrofitting plumbing kill the ROI?

  3. Risk tolerance: Even with a 95% confidence fail-safe routing to full treatment, would fab facility managers ever trust automated diversion on live lines?

We appreciate any critique, reality checks, or plain old advice for this little project of ours!

P.S: It would be helpful if everyone replying mentioned their current occupation, let it be a student or a professional, anything helps us. And our feedback loop! hence submitting this google forum would do us great help (Currently at 53 responses!)

google forms: https://forms.gle/B9zF4yDDKGxK63jZ8


r/Hydrology • • 1d ago

Looking for advice regarding a student water conservation pitch competition!

Thumbnail reddit.com
2 Upvotes

r/Hydrology • • 2d ago

Can a river basin face a water crisis even when its average annual inflow remains relatively stable?

Post image
7 Upvotes

've been exploring this question in our recent study of the Ili–Balkhash River Basin in Central Asia.

One of the key issues is that average water availability does not necessarily reveal the risks associated with hydrological variability, prolonged dry periods and competing water demands.

I'm curious to hear from the hydrology and water resources community:

Do you think water management models place too much emphasis on average annual inflow, while paying insufficient attention to the sequence and persistence of dry periods?

Our research: Scenario-Based Assessment and Modeling in the Ili–Balkhash River Basin (Water, 2026).

https://doi.org/10.3390/w18192457


r/Hydrology • • 3d ago

Micro watershed delineation questions

Thumbnail reddit.com
2 Upvotes

Reposting this here in case I reach other folks


r/Hydrology • • 3d ago

Help finding permanent water level and flow equipment

8 Upvotes

Hi there,

My work has a wetland area that has a stream that we want to set up a permanent monitoring station and I have been tasked into looking into equipment for it. We would like to have both a flow monitor and stream water monitor. We would also ideally like for it to be able to connect to a cellular network to transmit the data.

I am in the US, and I have been told not to worry about the budget at this point in the research stage, so any direction you can point me in will be helpful!

Thank you so much in advance! I have almost no hydrology knowledge so I have been struggling


r/Hydrology • • 3d ago

Need someone help finding direction post undergrad

8 Upvotes

Hi everyone, I'm currently half way through my bachelors in Earth science with a concentration in Environmental and Hydrology. I switched from chemistry to this degree, but I'm really happy with my switch so far. I'm just curious, is there much job security in this field? Like will it be hard to find a well paying job out the gate with my Batchelor's? Or should I try and get into a masters or PHD program? I don't have any experience in research but plan on applying for some opportunities next semester.


r/Hydrology • • 4d ago

Hiring for Water Engineering Project Manager

8 Upvotes

I didn't know where else to post this.

Title days it all - hiring for a Water Engineering Project Manager role to oversee implementation of digital tools (Power BI / SQL / GIS / AI).

Ideally between 6-8 years experience. East coast based but fully remote. No PE required, but experience in data analytics/science + water/Wastewater/stormwater preferred.

If interested please send me a message.

Edit: USA based

Edit: 112k - 155k based on experience

Edit: details This role works closely with clients to develop technology roadmaps, evaluate and select solutions, establish supporting business processes, and guide implementation efforts through deployment and adoption. Responsibilities include leading the development of advanced BI reports and dashboards, recommending optimizations for enterprise applications, and collaborating with technical staff in the design and implementation of data integration and analytics solutions. This role will apply recognized data management and governance practices, including DAMA-DMBOK principles, to assess data capabilities, define governance approaches, improve data quality and accessibility, and develop practical roadmaps that maximize the business value of client data assets


r/Hydrology • • 4d ago

Projet de fin d'études d'ingénieur : dessalement d'eau de mer à énergie solaire avec capteurs et enregistrement de données. Quels capteurs et quelle approche utiliseriez-vous ?

1 Upvotes

Bonjour à tous,

Je suis étudiant en BTS en Tunisie et il me reste environ deux mois pour terminer mon projet de fin d'études (PFE).

Projet : un système de dessalement solaire (évaporation + condensation, avec un radiateur pour le refroidissement). Je souhaite ajouter des instruments pour mesurer et enregistrer :

Pression

Température (évaporateur, condenseur, ambiante)

Niveau d'eau

Niveau d'énergie solaire (tension/courant photovoltaïque)

Objectif : mesurer les performances réelles (litres/heure, énergie par litre, rendement), et non pas simplement automatiser le processus.

Mes questions :

  1. Quels capteurs recommanderiez-vous pour ces mesures (peu coûteux et fiables en conditions chaudes et humides) ?

  2. Une API et l’enregistrement des données suffisent-ils, ou devrais-je envisager autre chose ?

  3. Quelles sont les erreurs courantes à éviter lors de l’instrumentation d’un système thermique de ce type ?

Mon temps est limité, je souhaite donc une solution simple et robuste. Vos conseils et liens sont les bienvenus. Merci !


r/Hydrology • • 5d ago

IDF Curves Environment Canada

Post image
0 Upvotes

Hi!

Does anyone know how to get/print IDF Curves from Environment Canada? I keep getting led to these pages: https://open.canada.ca/data/en/dataset/15aa455c-9f9f-4405-8eee-4445d02fd35c https://climate.weather.gc.ca/prods_servs/engineering_e.html that explains how curves are produced and links to download IDF data and not the actual curve... Scholarly papers I've seen with a print IDF Curve from the ECCC only credit the ECCC, and no links in the References lead to the original pdf or images of the curves :,(

Any help is appreciated!


r/Hydrology • • 5d ago

I built an interactive 2D and 3D map of the Great Lakes that lets you explore water temperatures, underwater currents, and conditions at different depths

Thumbnail
greatlakestrolling.com
229 Upvotes

Explore all five Great Lakes in 2D and 3D. See water temperatures below the surface, thermocline depths, underwater currents, depths, and animated wind and wave forecasts using NOAA data.

2D: https://greatlakestrolling.com/
3D: https://greatlakestrolling.com/great-lakes-3d

Let me know if you have any feedback or anything else thats cool you want added.


r/Hydrology • • 8d ago Popcorn

American Institute of Hydrology Technical Hub

15 Upvotes

Dear Hydrologists:

AIH has launched the Technical Hub, a growing, practitioner-focused resource intended to help hydrologists, engineers, researchers, and students find useful technical information, data sources, tools, and practical workflows in one place. It currently includes resources on topics such as topographic data, watershed delineation, land use/land cover, soils, and web tools, with additional topics being developed.

Please take a look at the AIH Technical Hub and let us know:

  • What resources or topics would you like to see added?

  • Are there technical resources you find particularly useful that could be shared with the hydrology community?

  • Would you be interested in contributing content or resources to the Hub?

The goal is to make this a living, collaborative resource for the hydrology community, so your ideas and contributions are welcome.


r/Hydrology • • 9d ago

Career pivot from data analytics. How to get first experience in water?

8 Upvotes

Considering a career pivot at 31. I've worked in the healthcare space for 9 years doing a variety of things: project management, tech sales, and most recently data analytics/data science for the past 5 years. I'm fed up working in this industry and looking to make a change to something less soul sucking. I've become interested in geology and water recently and feel like I want to explore this field a little more. Right now what I'm doing feels so disconnected from the physical world and I think I'd like to do something with a fieldwork component and that uses my science brain a little more. Plus water is essential and important and will only become more important especially out in the western US where I live (Colorado).

My bachelors degree is in Economics but I have a minor in Chemistry and have taken a bunch of science courses because I was doing the pre-med path for a while. I've been looking into getting a masters in Hydrology and it seems like I have all the pre-recs for a program at Colorado School of Mines (I'm currently living in Denver). Before doing that though I feel like I should get some more concrete experience in the field and make sure it's actually something I want to do.

I have an analytical background that I think would transfer pretty well and I do have some GIS experience, but I'm just not sure how to break into the field.

Any advice for someone in my position? I spoke to an environmental consultant friend of mine and he suggested I look for entry level field sampling or environmental scientist roles, but I'm concerned that I won't be very hirable without any experience.


r/Hydrology • • 9d ago

Water erosion rivers

7 Upvotes

So rills and gully’s are channels that are cut through by erosion by water right from my understanding. So are they more common in higher elevations and they eventually grow wide enough to become rivers? Or do larger sediments impede flow and it will retain the same size? My question might be a little confusing so just let me know if I need to clarify anything.


r/Hydrology • • 10d ago

Press the President - Lower Minnesota River Watershed District Q&A Discussion

Post image
3 Upvotes

r/Hydrology • • 10d ago

Hello me identify what this’s river contamination is

Thumbnail
gallery
26 Upvotes

I’m trying to track down a point source groundwater contamination near my house.  I live in Maryland in the Piedmont fractured crystalline bedrock geology.  I have high levels chloride (~1000ppm), sodium (~500ppm), manganese (~15 ppm) in my well water.  Also found to have Acesulfame-K (~550 ng/L), septic trace chemical in my water.  I have ruled out road salt as the source of the contamination with a State Highway geology report.  I have a commercial neighbor that very likely puts hundreds of pound of food salt into their on-site disposal system which is ~100’ from homes well.
 
I’ve had no luck with the county health dept and state dept of environment with regard to regulating the commercial neighbor.  I’m looking at the Clean Water Act as my next avenue to get this regulated.  I know this is not surface water but I believe the contamination makes its way to the surface through nearby headwaters and tributaries that lead to the main river.  The topography drops 150’ from the source to the main river about 1.5 miles away.  I’m currently collecting water samples from various points along the potentially contaminated tributary and the confluence point with the main river.  I have HACH Chloride and Manganese titration test kits on the way and will test the samples this weekend.
 
While collecting samples at the confluence, I noticed some symptoms that I think could be indications of the manganese.  Please let me know if you agree or if it’s something else, let me know.  If it’s manganese, could this have negative consequences to the Class III cold water trout stream?  If it’s manganese, I believe the chloride and sodium levels will be elevated as well.


r/Hydrology • • 11d ago

HEC-RAS Pipe Networks Hydrograph problem

Thumbnail
gallery
6 Upvotes

I'm modeling a Pipe Network in HEC-RAS with two nodes. Both nodes' inverts elevations are laying on the ground and They are Culvert opening type. When i solve the model, this strange behaviour appears on the Hydrograph. It looks like everything is going well US, but DS there is any problem that i don't know how to solve. Anyone knows what's happening?

Thanks!


r/Hydrology • • 12d ago

A Dam Doesn't Make Electricity… So What Does?

0 Upvotes

A dam doesn't actually make electricity. So how does falling water power an entire town? ⚡

It all starts with gravity.

Discover how water travels through a penstock, spins a turbine, and powers a generator using magnets and copper coils to produce electricity.

This is how hydroelectric power works—and the science behind one of the world's most important renewable energy sources.

💡 Learn something new in 40 seconds.

Follow for more amazing engineering facts, mind-blowing science, and technology explained simply.

#HydroelectricPower #EngineeringFacts #ScienceShorts #HowItWorks #OddlyKnow


r/Hydrology • • 12d ago

[OC] Interactive Visualization of current lake mead water levels using USBR data and bathymetric scans to model the lakebed

Thumbnail
lakemead.nevadahiking.org
22 Upvotes

r/Hydrology • • 13d ago

Does anyone here use Virtual Hydraulic Drilling Fluid Simulation by SLB as a student, I need to use for private purposes

0 Upvotes

r/Hydrology • • 18d ago

Take the Hydrologist-In-Training Exam at no cost through AIH

Post image
40 Upvotes

The American Institute of Hydrology is offering entrants the opportunity to take the HIT Exam at no upfront cost.

The process is easy. Just open an account on their website and send official transcripts for review and they will let you know about eligibility in ~3 weeks.

Edit: Changed the wording a bit and expanded on the process a bit.


r/Hydrology • • 19d ago

HEC-RAS 7.0.2 fails on startup: “Error initializing the GDAL path variables” (GdalPINVOKE type initializer exception)

1 Upvotes

Windows 10 64-bit, HEC-RAS 7.0.2 installed in the default path (C:\Program Files (x86)\HEC\HEC-RAS\7.0.2). The same error happens with other HEC-RAS versions on this machine.

Full error: “Error initializing the GDAL path variables. Please check HEC-RAS installation. The type initializer for ‘OSGeo.GDAL.GdalPINVOKE’ threw an exception.” Stack: GdalPINVOKE.SetConfigOption → Gdal.SetConfigOption → GDALSetup.Initialize → GDALSetup.InitializeMultiplatform → RasMapperLib.SharedData.SetupGDAL().

Already tried: clean reinstall; Visual C++ 2015-2022 x86 and x64 installed/repaired; launching Ras.exe with a minimal PATH; Dependencies tool on gdal_wrap.dll and gdal302.dll (no missing modules, all resolve to the HEC folder or System32); decimal symbol set to “.”; antivirus (Avast) shields disabled; no GDAL_DATA, GDAL_DRIVER_PATH or PROJ_LIB variables set. Other geospatial software installed: ArcGIS, ENVI/IDL, Vulcan.

Any idea what else could cause the GDAL initialization to fail?