Samsung s90d 77 inch Phillips hue system 8k sync box 100 inch pro gradient strip Two light tubes (one under the tv & one on the mantle Two smart light bars (one on each backside of the tv stand
I also have more lights going on behind me & in the rest of the dining room area but it’s out of frame
Disclosure: Philips Hue Canada provided me with the Gradient Strip Light Pro and 8K Sync Box to review. All opinions in this review are entirely my own.
Hello fellow Philips Hue enthusiasts. I was selected by r/LG_UserHub to receive a 65-inch LG G6 OLED TV through a promotional event in r/4kTV.
I also own a 65-inch LG C5 OLED, which has the original Philips Hue Play Gradient Lightstrip installed behind it. Philips Hue provided the new Gradient Strip Light Pro so I could use it with the G6 and compare it with the original strip on my C5.
Setup and installation
Setup was a breeze. I already have an extensive Hue ecosystem, including a Hue Bridge, the original Play Gradient Lightstrip behind my C5, and Hue Signe floor lamps on either side of the G6. I also have additional Hue lighting in my home-theatre room, so connecting everything and adding the new products to my setup was straightforward.
The Pro was noticeably easier to install than the original light strip. It’s narrower in diameter and lighter, and Philips includes more mounting brackets. Those differences made it easier to position and secure behind the TV.
My G6 is mounted with the front of the screen 4.5 inches from the wall. The TV itself is exactly one inch thick, leaving a 3.5-inch gap between the back of the TV and the wall. The Gradient Strip Light Pro fits well in that space and spreads its light beautifully across the wall.
Picture and lighting
Compared with the original strip on my C5, the Pro is much brighter and has a stronger spread of light. Its new OmniGlow technology features a high-density, smart LED strip-lighting technology designed to deliver completely seamless, spot-free illumination without visible individual LED diodes or "hotspots". In my opinion, this is the top feature and what really sets the Pro apart from the original light strip.
The Gradient Strip Light Pro also matches exceptionally well with the Hue Signe floor lamps on either side of the G6. Together, the lights make the whole setup feel very immersive.
The Hue scene I use most often is Meriete. It’s easily my favourite, and it’s a great match to the GTA VI colour scheme. I also like Dimmed and Energize; they offer two very different lighting moods, and both look excellent.
8K Sync Box
The 8K Sync Box adds another layer of immersion by syncing the Gradient Strip Light Pro and the other Hue lights in my room with the content on screen.
The Sync Box is HDMI 2.1 certified and supports syncing lights with TV content at up to 8K 60Hz or 4K 120Hz. My G6 is a 4K 120Hz TV with HDMI 2.1 ports and VRR up to 165Hz, while my PS5 Pro also has HDMI 2.1 and can output up to 120Hz, so the 8K Sync Box fits my gaming setup perfectly.
The lighting feels like an extension of the TV, and the Gradient Strip Light Pro does a phenomenal job of matching the colours and action on screen thanks to its Chromasync precision colour matching technology.
It can, however, get distracting as I found out after about 20 minutes of use, but that’s just my personal experience. For others, this may be their favourite feature and the reason they decide to buy a light strip in the first place. I’m not here to say one person’s preference is right and another person’s is wrong, I think to each their own — you should use your lighting the way you personally prefer.
Please note, if you want the sync feature to work best when gaming, make sure you choose the 8k Sync box with support for 4k 120Hz rather than the 4k sync box because the 4k sync box only supports 4k 60Hz while most modern gaming consoles & PC’s support 4k 120Hz or higher.
My personal preference is to pick a Hue scene, or a custom scene that I personally made, depending on my mood and then leave it set for the duration of my viewing time, or adjust to a different scene depending on the content I’m watching.
Final thoughts
I still love the original Philips Hue Gradient Lightstrip on my C5, but the Gradient Strip Light Pro takes the experience a step further. It’s brighter, produces richer colour, and spreads that colour beautifully across the wall. Paired with the 8K Sync Box and the rest of my Hue lighting, it helps turn a regular TV room into a home theatre—although I typically prefer to pick a pre-set scene rather than having the lights match the content on screen. Overall, it’s quite impressive, and I highly recommend the Philips Hue Gradient Strip Light Pro! 🙌😊
I recently bought a 3m Hue Flux Lightstrip and Hue Bridge for my 43-inch Samsung TV to create an Ambilight-like setup using the Hue Sync app in my tv.
The new “Behind TV” feature works quite well, although there’s sometimes a noticeable 0.5-second delay and some issues with colour zone proportions at high sensitivity.
The problem is that the strip is about 1m too long. I’d like to shorten it by 1m using the designated cutting points.
Will the Hue app automatically recognise the new length and adjust the lighting zones proportionally? Or will shortening it cause some screen colours (e.g. the last red or green section) to be lost?
I’m becoming VERY frustrated with my 8K sync box. It keeps loosing connection from my Apple TV 4K. Every time I switch off the TV and turn it back on, many time my TV shows that there’s no output signal from HDMI even though the Apple TV and the sync box is on.
I go on my Philips hue app, and under the sync tab, the output is changed to a different HDMI without me noticing, or sometimes still on the correct HDMI output but no signal.
I have to keep restarting the box from the app and then it starts working. Sometimes, the gradient light strip behind my TV freezes at a lower brightness and static. After a restart it gets fixed.
Is this a internet issue, I thought it uses Zigbee.
I have changed the Zigbee communication channel before, sometimes it helps (only for the sync box).
With Black Friday Coming up, id love suggestions on what I can add to make my wall more vibrant. I love listening to music with the lights synced.
75” Gradient Play Strip around the TV and Gradient Play Tube below the TV.
I have high ceilings (11ft?) and it feels like the colors really washout. The space itself is 5-600 ft of an open living room / kitchen. There are very few other walls - Second picture has 2 play bars on the floor below the picture window and another play tube behind a bookshelf (don’t think any of this is ideal either). I have a sync hue box as well.
I purchased (but not installed) some of the recessed lights but I’m not sure that’s the right direction.
Would love your ideas. Y’all have some great set ups!
I’m sorry if this is a repeated question but I can’t find the answer. I want my outside lights to come on at sunset and off at sunrise. I know I can set an automation for this but where I get lost is I also want my outdoor motion sensor to trigger different behaviours through the evening and night when the lights are active. e.g permanently on until midnight and then after that on for 5mins if movement detected and then off again. After sunrise nothing. However I can only assign set times in the motion sensor settings not sunset/sunrise and it means I keep having to change them as the daylight hours change Can this be done?
The solo are currently in the outlet (I think they are no longer being produced) for £35 and the flux is £60 and both 3M in length. Which would be the best strip?
Phillips do mounting brackets for the Flux - has anyone tried using the same brackets for the Solo? Do they fit without issue?
The lightstrip will be going on my headboard but the headboard at the back is a light, stretched fabric covering mostly wood panel. I don’t think the self-adhesive will work well on fabric.
I’ve got these festiva lights and I’d like to wrap them around my tree. Has anyone found a good way to keep this power connection waterproof with the extension cable I need to run? Why did they put this huge brick on the end….
Also if anyone’s does this … will squirrels tear this wire apart? I’ve already had to solder a connection once when I left it on the freezing ground (New York state ).
Is this a known limitation or am I doing something wrong?
Like the idea of lights changing colour throughout the day, so have the hall light set to come on at sunset to the ‘Nature’s Colours‘ scene with a 15-minute fade. The light does come on each day, but goes straight from off to on with no fade.
Fade does work if I use a standard scene but doesn’t work on any all-day scenes, even though the option is there.
i'm looking for a floor lamp in my bedroom (i don't have overhead light fixtures, no room for an end table) i could possibly set up as wake up alarm with the hue app maybe, but that use put aside there's like a 200 bucks difference (for the floor lamp, hue play being cheaper) between them when the specs seem very similar, does anyone know why possibly ?
unrelated but i find it hilarious they sell a "sleep and wake up lamp" when you can set up a schedule on any hue device
We just moved and I had two hue downlights. I really dont want to put them in the ceiling again and would like to plug them in a wall and use them as wall wash lights. I have a 3d printer and would make an enclosure for them. The wiring has a ground hot neutral. Couldn’t I just grab a good cord and wire it together and it should work? Anyone else done this yet?
I upgraded my older play gradient play strip to the newer omniglow gradient for the TV sync and found that it's quite underwhelming. The previous model is a bit brighter and way cheaper. I'm thinking to use an ultra bright flux 5m and cut it to length behind the TV. Would it work for monitor sync?
I have over 30 hue lights in my home, and the only one that has this issue is a light strip that is around a ceiling. It’s set to the bridge. If using the app or a hue dimmer switch, when setting the “energize” scene it will cycle though this color sequence. No one light does this. No other scene does this.
Looking at the scene setting (default from Hue), it’s the bluest-white light, compared to the “concentrate” scene that’s mixed lighting.
I can’t really think of a reason why this would be happening. Has anyone else seen this before? I’ve contacted support and it’s taking over a week where they’re still just asking me basic questions about the setup but no insight into the cause.
Okay I made a post last night trying to figure out why it isn't connecting and I finally got it connected. It got connected and for a minute but once I turned my Roku on and went to the HDMI where my Roku is, it disconnected. It got stuck at connecting and I redid everything and it's STILL stuck at connecting. Wtf do I do. I'm at wits end with this device.
I wanted to share that I cannot observe any PWM flicker using my phone's camera in pro mode on the essential bulbs which I think is great. I can easily see it already with shutter speeds of 1/500 on the regular ones. This is not a scientific test, just tells me that the PWM frequency of the essential is probably over 4kHz which I think is great.
Colors are without doubt much nicer on the regular ones but if you care about minimizing PWM flicker then go essential.
Does anyone know if the regular ones will also get a higher PWM frequency at some point?
We have a nice dimmer switch my wife is rather attached to that controls down-lighting in the kitchen (4 flat LED recessed lights). I want to change these to Hue lights. (I'm particularly excited that my procrastination got to see the release of the 6" dual-zone downlights.)
Can I use this dimmer in any fashion? If not on/off, at least the dimming part?
I have Home Assistant in the house as well, so I don't need it to be a direct Hue integration.
I’m getting a LG C5 83” and was wondering if I can just use the sync app without having to get the box, should i also get the bridge? I will be using native TV apps, a computer once in awhile (HDMI) and a fire stick. Will the app pick up content on the fire stick and computer, or do i need the box?