r/HondaCB • u/Miatarama • 1h ago
77 CB750K Fresh Unit
My first road bike finally got it's revival and I couldn't be happier. Last pic is 2012.
r/HondaCB • u/Miatarama • 1h ago
My first road bike finally got it's revival and I couldn't be happier. Last pic is 2012.
r/HondaCB • u/UndergroundRonin • 1d ago
How’s it going guys just recently purchased a 1977 cb550f. Overall great bike aside from the oil leaking from the exhaust. I read that it could be a valve stem issue or piston ring issue basically a top end issue. Before I proceeded and bought a kit I wanted to ask if anyone else has dealt with it and what might be the root of cause. I just want to know what to look for before doing things to it that I didn’t have to spend money or time on. Much appreciated for the help in advance. This bike I purchased with the mikuni carb set new to me I’ve only dealt with oem carbs.
r/HondaCB • u/EarlyBike5721 • 23h ago
r/HondaCB • u/pakkathirboki • 1d ago
r/HondaCB • u/MacciBoi • 1d ago
I have a 1971 Honda CB350 and the left peg has significantly more vibration than the right peg. I recently noticed that the left muffler pipe is touching the bar connected to the peg. Could this be contributing? I know these are buzzy bikes already but this seems to be more severe. Thanks!
r/HondaCB • u/Ill_Adhesiveness8639 • 2d ago
As the title says.
What did it cost you?
This is just a post with the intention of making me cry harder.
I have a lot of the old dohc´s that this bike is inspired from.
So this bike was pretty intriguing.
I looked it up and it was around 11.000$
Cool i thought, i could sell a couple of things to support that and easily, like already have that money to squander.
Then i looked further and in country prices is no less than 25.000$
That´s a bit too much for me for what i get.
FML
r/HondaCB • u/AlphaPrime1111 • 2d ago
Hey everyone!
I recently bought my CB350 H’ness. It’s been around 20 days, and this is my first bike, so I’m still learning what’s normal and what’s not.
I’ve noticed two things:
1. Scratching noise from the rear disc brake:
Whenever I apply the rear brake, I hear a scratching/grinding kind of noise. It doesn’t happen while the wheel is rotating normally, only when I press the brake. This was happening even before my first service.
2. Clutch lever play:
I’ve also started noticing some free play in the clutch lever. I don’t remember it being there when the bike was brand new, but now it’s noticeable.
I recently got my first service done, and when I asked the Honda service centre mechanic about both issues, he said they’re common and nothing to worry about.
I’d like to hear from other CB350 H’ness owners:
Do you also experience scratching noises when applying the rear disc brake?
Is some clutch lever free play normal, even if it wasn’t noticeable initially?
Are these genuinely common characteristics of the bike, or should I get them checked again?
Since this is my first bike, I don’t want to overthink every little sound, but I also don’t want to ignore something that could become a bigger issue.
Would appreciate your experiences and suggestions. Thanks!
r/HondaCB • u/VerryRides • 3d ago
I have a 82 CB900C that I've been restoring from a "barn find" condition and last year it wasnt charging, so following the factory manual's diagnostics, I found that my charging rotor had failed. The two slip rings where the brushes go should have 3-5 ohms between them, but I measured them at infinite resistance meaning there was an open connection internally. I ordered a brand new rotor from Rick's motorsport electrics as I believed they are the gold standard for aftermarket electrical parts. It worked and my bike charged happily... until last weekend it died while riding ans stranded me on the side of the road and I had to get towed home. I stupidly blindly bought a new stator because "the rotor is brand new it cant possibly be the issue"! Well, the new stator didnt fix it, so back to square one, I run the diagnostics and find my one year old rotor has infinite resistance again across the slip rings. Ricks offers a one year warranty and I am one month past that date meaning I am basically screwed.
Any advice? Think it was a fluke or has Rick's gone downhill?
r/HondaCB • u/AverageFella2000 • 4d ago
Honda 1980 CB650z
Been trying to tick off issues with this bike one by one since getting it, doing all work myself. However after scratching my head on this one I had a mechanic look at it today. I sent him this video and this is what he believes to be the explanation, is that right?
“Yeah looks like it's ilding ok but when you add throttle it's hanging onto a high idle for a random amount of time. That is what I said earlier about the throttle pump would do. When you give it a quick blip the throttle pump adds fuel so to avoid a delay when riding. It means as it's running at idle the excess fuel is being used up gradually. I think this is normal and when you're on the road the extra fuel gets used up more because it's under load and at high rpm anyway. Once that extra fuel is burnt up it seems like it returns to idle.
It's kind of unique to the slide carb and throttle pump setup.“
Doesn’t seem right to me that a bike would do this but I don’t know much about Carbs.
r/HondaCB • u/Curious_Algae6998 • 4d ago
Bonjour,
Lorsque je fais de forte accélération, il semble y avoir un bruit de vibration métallique dans le pot de mon PCX. A la relâche des gazs le bruit disparaît complètement. Il y a 25 000km
Quelqu'un a t'il déjà été confronté à ce bruit?
Merci pour votre aide
r/HondaCB • u/CT02NNN • 5d ago
r/HondaCB • u/Ok_Salamander98 • 4d ago
Looking for an aftermarket right side control. Anyone have any luck with these aftermarket for a 74 CL200. Part #35300-456-670
r/HondaCB • u/Confident-Vehicle-97 • 4d ago
r/HondaCB • u/PinkGreen666 • 5d ago
Just picked up this beautiful sucker. Never had a tach before so I’m not sure what I should be cruising at just riding around the city. If I treat it like a car and stay around 3k rpm I end up in 5th at 30mph which seems wrong. But cruising around at 5k rpm feels like too much.
I know it’s a high revving bike so is it normal to just cruise around 4k-5k? Thanks.
r/HondaCB • u/Fifty_Hertz • 6d ago
As promised here are some better photos of my new-to-me 1981 CBX. It's a little dirty from the delivery trip home but will clean up nicely. In the cold hard light of day, I'm still very happy with my acquisition 😊
r/HondaCB • u/soundfive • 5d ago
Looking at upgrading the suspension on my 2026. Currently looking at YSS MX302 for $400 and the Hyperpro front fork kit for $200 but I was wondering if there was any options that I'm missing or would be better. I was hoping for a cheaper option for the rear shock but couldn't find much. I read about just swapping the spring on the stock shock but I couldn't find any parts that I was 100% confident would work as I'm trying to do everything myself. The bike is mainly used for city commuting to work and I'm around 210-215lbs geared. Thanks
r/HondaCB • u/Spirited_Cause_6762 • 5d ago
I’m not sure why, but there’s a chainsaw-like noise at around 4,650 RPM. It only occurs within a specific RPM range and disappears when the RPM is either lower or higher than that point. The noise sounds like it’s coming from around the dashboard or the triple clamp area.
I’ve already tried removing the front fuel tank cover and phone mount, but the noise is still there. I’ve also replaced the exhaust, but the noise persists.
Has anyone experienced something similar or have any idea what might be causing this issue?
r/HondaCB • u/BayardTheFlame • 5d ago
Bonjour, je reviens d’un grand roadtrip à moto en Europe avec mon cb 500 pc 32 de 1998. J’ai fais une chute en Autriche côté embrayage au mois d’août. La moto est resté 3 mois a l’arrêt chez un particulier. La dame a réussi à refaire démarrer la moto une fois.
J’ai récupéré ma moto en novembre elle ne démarrait plus.
J’ai changé la batterie car elle était morte toujours rien.
Je suis débutant en mécanique et je n’y connais rien si quelqu’un pouvait m’aider ce serait vraiment gentil.
Voici le bruit que fait ma moto quand j’essaie de la démarrer.
Merci d’avance pour vos retours « ride safe »