r/HomeImprovement • • 18m ago

White Powder coming through basement floor

1 Upvotes

Photo of white powder

White powder coming through basement tile grout — anyone seen this? Is there a fix without ripping up the floor?

My dad has been in construction for years and has never seen anything like this. He’s asked other people in the business, and nobody seems to know what’s going on.

We spent thousands finishing our fully underground basement. A few months after installing the tile, this white, dry, powdery substance started coming through the grout. It was minor at first but has gotten progressively worse. It also glows under a UV/blacklight.
We’ve noticed moisture collecting underneath the rubber mat our treadmill sits on, so we’re suspecting moisture coming through the concrete slab.

We’ve tried a commercial dehumidifier with no success. We also recently replaced the grout in a small area with waterproof grout, but the substance started coming through again within days.

My main questions:
What is this, and what’s causing it?
Is there a permanent fix without ripping up the entire floor?
What tests can we do to identify the substance and determine where the moisture is coming from?

We’ve already invested so much into this basement and really want to avoid tearing it apart. Any advice, especially from someone who’s dealt with this before, would be greatly appreciated!


r/HomeImprovement • • 1h ago

Wooden garage has rotted beams; trying to figure out if handyman actually fixed the issue

1 Upvotes

Bought a good-condition house with a bad-condition garage. Inspector noted that the damaged/decaying concrete slab has left the wood beams of the garage's east wall exposed. Inspection report noted: "Missing bottom plates at the east wall. The lumber is completely decayed and largely missing. Have a qualified carpenter cut treated 2x4s and drop them in between the studs fastening the studs from both sides to the green treat. Stacking two 2x4s between the studs and fastening them will help to stabilize the wall."

Here are pictures of the finished work:

https://imgur.com/a/tRviI8x

I'm confused as to how this is stopping the root of the beams from rotting, and what is physically supporting the building once those do rot. Am I missing something, or is this just not a fix?


r/HomeImprovement • • 1h ago

How to clean white aluminum siding?

1 Upvotes

Picture of siding

Read that using Wet & Forget could get this off and back to white, or using a power washer. I don’t want to mess up the paint though. Any suggestions?


r/HomeImprovement • • 2h ago

What to do with these downspouts?

1 Upvotes

https://imgur.com/a/vzEwRRa

We have 2 downspouts and a sump pump out that go right into our driveway. It's a shared driveway about two cars wide with another house against it on the other side. When we drive up it, we clear the gravel by maybe a foot if that. The grade is pretty good toward the centre and down to the street, but it's a bit flat up where I took the photo from.

I've looked at different tray type things that you can drive over but it seems like the rubber ones flatten out and the concrete ones can mess with your wheel alignment. Should I try to run a long one parallel with the house to where the grade is better? But then there's the windows

Any big ideas?


r/HomeImprovement • • 2h ago

Re-insulating the space behind my knee walls, best approach?

1 Upvotes

I want to re-insulate the space behind my knee walls. The old insulation was just lying loose on the ceiling of the first floor so I've removed it.

The roof consists of asbestos-containing sheets (yes, confirmed with a test kit, not a problem in The Netherlands), with purlins that sag a bit here and there. I'm wondering what the best way is to install new insulation (glass wool, rock wool, or PIR) here.

At this spot, the cavity wall ends in the attic space, directly above the bedroom ceiling, which is just a thin wooden ceiling panel. I can't see any weep holes on this side of the house, so I don't know if the cavity is closed, filled, or if it's a solid wall.

What should I take into account regarding ventilation and installation? And can I also lay insulation on the ceiling instead? If so, how should I deal with the top of the cavity wall?


r/HomeImprovement • • 3h ago

Need sealer recommendation for shower/tub wall

1 Upvotes

I just bought this house and the bathroom shower and tub come with these slate/natural stones. From my understanding, they need to be sealed every 2 or 3 years. What sealer do you recommend?​​​​

https://imgur.com/a/yATnL5P


r/HomeImprovement • • 3h ago

Siding Patch Job Advice

2 Upvotes

Apparently I got a defective batch of siding and it is starting to pop off as you can see in photos. I’m looking into replacement options, insurance claims, etc….

My question is: should I patch this or cover this some how to prevent moisture from getting in. If so how?
I live in Colorado and it’s pretty dry, but still get rain occasionally. Please any advice is appreciated.


r/HomeImprovement • • 3h ago

"Finishing" fieldstone basement with low ceilings.

2 Upvotes

I'm in MA and am looking to somewhat finish my basement. It's a really old house with an old concrete floor and stone foundation walls. There's already led lights that are wired in the exposed ceilings. I don't want to make it "habitable" space by any means, just make it so I can put a desk down there to work without looking at the stone walls and old floor and ceiling.

I have a french drain around the interior perimeter so I luckily don't get water down there. There's one corner of the foundation where water comes through the stone when it rains heavy but it's in an area that I wouldn't finish anyways and the water goes into the french drain.

I'm thinking of painting the exposed ceiling black, putting a cheap floor down, and putting temporary wall panels to cover the exposed stone walls. Is this something that I need a permit for? Because the ceiling height is under 6-8" I probably wouldn't even be able to get a permit anyway, just looking for advice if anyone else has done anything similar.


r/HomeImprovement • • 3h ago

Should baseboards be installed prior to carpet?

12 Upvotes

Hey, thanks for looking. I'm putting up board and batten walls in a room that will be carpeted this week. I just called the installer to see if I should leave a 1/4 gap to tuck the carpet and he advised on waiting until the carpet is installed so that I can just put the baseboards on top. Is this normal?


r/HomeImprovement • • 4h ago

Best screens for screened porch

1 Upvotes

I need to replace the screens that have gotten saggy, dimpled and torn. What are the best screens that balance visibility with durability? UV protection and tiny bugs aren't an issue.


r/HomeImprovement • • 4h ago

Just bought a house, want to install a Ring into Fiber cement siding. Can't find much info on exactly what to do, any tips?

1 Upvotes

The included ring screws are so small, I don't know if they would reach any wood/stud behind the siding and I also don't know if the installed doorbell even is drilled into the stud.

I also can't find any nice mounts, our siding measures 7".

I also don't have masonry bits, I don't really care if my current bits gets damage, can I get away with those? Or do I really need masonry bits?

Any and all tips are welcomed because I'm out of my league here. I'm pretty handy but up until now ive only drilled into apartment and now our homes drywall.

Cement siding is completely new to me and it's exposed to the outdoor elements so I wanna make sure I do this right!


r/HomeImprovement • • 4h ago

Aluminum storm windows

1 Upvotes

Does anyone know of a company where I can order custom size aluminum storm window? I’ve looked on Facebook marketplace and asked around, but I can’t find anything. Any help would be greatly appreciated.


r/HomeImprovement • • 5h ago

Practical, cost-effective door sweeps for brand-new solid-core MDF doors: Adequate soundproofing without scratching hardwood?

2 Upvotes

Hey everyone,

I’m replacing all my interior doors with brand-new solid-core MDF slabs and want to get adequate soundproofing between bedrooms (hardwood floors) and bathrooms (tile floors). This is step one before looking at wall treatments, and I'm hoping sealing the doors and frames will be enough for everyday noise.

Along with the doors, I’ll be installing proper perimeter door gaskets (bulb seals around the frame).
My main dilemma is practicality and price for the bottom gap:

I want real noise reduction, but doing mechanical dropdown seals (like the KN Crowder CT-51) across the whole house gets very expensive ($120+ CAD per door), requires precision routing into the MDF slabs, and leaves a visible metal edge I’m not crazy about.

On the flip side, I need something that won't scratch or squeegee grit into my hardwood floors over time.
For those of you who have tackled whole-house interior door sealing: What is the practical, budget-friendly sweet spot? Are surface-mounted brush sweeps or low-friction slide-on seals actually effective enough for adequate noise reduction, or is there another practical trick I'm missing?

If you've done this, which exact brand and part # did you buy, and is there a true consensus on what gives you the best balance of price, performance, and floor safety?

Thank you!


r/HomeImprovement • • 5h ago

HVAC system is not up to code, who is legally liable for fixing it?

0 Upvotes

My HVAC ducts were installed 15-20 years ago by a family friend (probably not licensed, not my idea). since then we have had 3 companies come out to replace various things, most recently a year ago company #2 came out to replace a furnace and water heater (said nothing about it not being up to code) and about a month ago company #3 came out to add a foot of pvc pipe because we were having some issues with exhaust smells, and they told us none of it was up to code. what do I do?


r/HomeImprovement • • 5h ago

Considering a light limewash on our exterior brick

1 Upvotes

Just bought our dream house but the exterior brick is very orange. I like brick colors generally but man that’s super orange, especially next to the brown roof. We are considering doing a super diluted coat of limewash in Rambio reposo beige but I’m worried it will look too opaque. Is there anything you’d recommed to just tone down the orangeness a tad?

Brick Photo


r/HomeImprovement • • 5h ago

Dishwasher smells

2 Upvotes

I recently washed an old garlic jar because we upcycle in this household (lol) and now I literally cannot get rid of the smell. I’ve ran several loads since, including a few sanitizing sessions for bottles and even still, every single thing comes out smelling like garlic…. What do I do?


r/HomeImprovement • • 6h ago

Painting Shadowbox fence

1 Upvotes

Just would like to know your favorite washes/prep products prior to painting my wood (cedar?) shadowbox fence. It currently has a semi transparent stain i think. Going with a semi solid oil base and will do a test first to see if it adheres, if not will go with a solid acrylic stain. Doing a solid stain on the deck as it already is solid, same color.

What products are best/make the project easier?

I was going to hire out but all 3 quotes i got were 4k for 80ft of fencing front and back. I cant justify that when materials will be 1k at most. I just had my entire chimney repointed, waterproofed, new crown and cap for less than that.


r/HomeImprovement • • 6h ago

Painted kitchen cabinet doors

1 Upvotes

Keeping the boxes but looking to replace just the doors. I’d like them to be painted, shaker style. Who’s had good experiences lately? Who do you recommend?


r/HomeImprovement • • 6h ago

Fixing kitchen sink

4 Upvotes

Apologies if this is the wrong sub.

My kitchen has one of those (what I can only assume is faux) marble/granite/stone countertops, in which is a bottom-mounted sink. I just noticed that the back portion of the sink near the faucet has separated, allowing some rust (and god knows what else) to form in the gap.

I looked underneath and there are wingnuts and brackets located around the perimeter except where there is the gap (which explains why it happened).

Is the fix for this as simple as loosening the nuts, pulling the entire sink basin down, cleaning the old silicone/caulk off, cleaning the nasty stuff off as well, then reinstalling it with new silicone? (Id buy another threaded post to epoxy to the counter so that section of sink is supported)


r/HomeImprovement • • 6h ago

Framing/fixing a cutoff wall corner

3 Upvotes

Plumber had to cut a corner section of wall out (https://imgur.com/a/eTaj5sL) to get access to a pipe and replace a section. How do I go about re-framing this section? Specifically, how can I extend the sawed off 2x4 back to the bottom plate? Should I use some kind of half-lap joint or should I just replace the entire stud from the top plate all the way down (which would require more drywall work)?

I imagine that this happens more often than not when old pipes are replaced in a finished basement, but I couldn't find any resources online. Maybe I'm not searching for the right terms, pointers are appreciated.


r/HomeImprovement • • 7h ago

I want to build a tiny, windowless hobbit office for occasional work from home. Talk me out of it

36 Upvotes

OK, here's the deal.

We have three children in a 1920s American Four Square. There's enough room for everyone but we don't have extra bedrooms laying around or much extra space at all.

I go to the office for work but would love to have a home office to use one day a week, in the evenings, or on days where family scheduling would benefit by me being home. Anyway, one thing led to another and now I've got this harebrained idea of turning the wet bar in the basement into a cozy hobbit office (not a nasty, dirty, wet hole, filled with the ends of worms and an oozy smell - but a hobbit office, and that means comfort). It also means snug - right now the space is ~70" across and would be ~70" deep so that's 34 square feet*

Here'a photo of the wet bar and here is a Claude-generated mockup of the space. I'm thinking I'd lean into the whole tiny theme and get a hidden bookcase door (looking at Murphy Door) so you have a bookcase that opens up and inside I'd have two monitors mounted on the back wall, maybe some shelves on the right side, and lots of warm lighting. The nicer it gets the more fun it would be so I'm thinking a dark/forest green and brass theme. Maybe some wall paneling. Art on the walls, walnut desk, some picture lights, really design and decorate it like it's a full-scale office.

All that said, maybe it'll feel claustrophobic and terrible so I'm looking for the wisdom of the crowd to weigh in here.

*the left-side of this nook is up against a mechanical room. If the space could benefit from being a bit larger I could steal maybe 4' from that space and get up to 60 square feet (maybe add a comfy reading chair on that side?)

TL;DR: wife suspects I've lost my mind but a tiny home office you access via a hidden bookcase would be amazing if you lean into making it really nice.

EDIT: I should've mentioned, that soffit on the back is there to cover an HVAC supply vent so we're good. We could tap a new vent there to bring in AC and then add a vent into the adjoining mechanical room so the new air has somewhere to go. We could even add a powered fan to pull the air out and into the mechanical room.


r/HomeImprovement • • 7h ago

Roman shades disintegrating

0 Upvotes

Hello,

My house came with roman shades and I noticed that all the sunlight facing shades, the back lining paper is disintegrating. I thought it was the cats at first, but it crumbled to pieces just from me touching them. This is only occurring on the windows that are getting full sunlight.

Is there a way to fix the back of these or should I just replace them? They let in too much sun without the paper. Like I can see the sun poking through and it hurts (fine with areas that have backing still).

https://imgur.com/gallery/M7jx6jf


r/HomeImprovement • • 7h ago

Chirp driving me crazy

0 Upvotes

Hi all, we had extensive work done over the last couple of years. A few weeks ago, I started hearing the chirping of a smoke detector like when the battery is running low. Went to each one and they were all fine. Cant figure it out and like I said, it's now been 3 weeks. I think maybe someone drywalled it in? I'm open to suggestions otherwise but I fear it's hardwired. The chirping location isn't exactly clear either. If I go to the steps leading to the basement its loud there but when I go to the top of the steps on the 2nd floor its loud there too. I'd rather not start opening up a bunch of walls so thought to ask here first. Thank you!


r/HomeImprovement • • 7h ago

Removing Mineral Oil stains from Laminate Countertop

3 Upvotes

What the title says, I need some recommendations on how to remove a mineral oil stain from a laminate countertop.

Background: oiled my cutting board and left it on the counter in our new place. The next morning these stains appeared in the countertop. They're not super obvious, but they're there.

I've tried using baking soda (both scrubbing with it and leaving it sit overnight) as well as rubbing alcohol per some info I dug up searching around, but neither worked. Thinking of picking up some barkeeps friend to try, but willing to hear other suggestions as well.

Also, if you have any suggestions for preventing stains getting into this nice white countertop, please let me know too.

Thanks!