r/HamRadio • • 3d ago Diamonds are Forever

Announcements πŸ”Š On Vibe-Coded Projects, Security, and Software Promotion in r/HamRadio

94 Upvotes

We've seen quite a few new ham radio apps and websites being promoted here lately. Some look useful, but others seem to have gone straight from an AI prompt to a public release, with little information about how they work or whether they've been properly tested.

We're not opposed to AI-assisted development. There's nothing wrong with experimenting, learning to code, or sharing something you've built. What concerns us is when people start distributing software they may not fully understand, particularly when other operators are expected to trust it with their equipment or personal information.

Security is a serious consideration here.

Some applications require accounts, access to logbooks, API credentials, or connections to radio equipment. What data is being collected? Is anything transmitted to external servers? What permissions does the application need? Are there third-party services or dependencies users should know about? Has the developer actually reviewed the code for vulnerabilities? These are basic questions for which the answers need to be available easily.

Not every project needs to be open source. Closed-source software has its place, but when users cannot inspect the code, they're relying even more heavily on the developer's honesty and competence. Likewise, releasing source code doesn't automatically make an application safe.

We also want to be clear about our existing rules.

Rule 9 requires disclosure of AI-generated content at the beginning of posts and comments. When promoting AI-assisted software, we expect developers to go further and explain how AI was used. Did it generate most of the application, assist with individual functions, or simply help troubleshoot existing code? What was independently reviewed and tested?

Rule 11 addresses AI-generated technical advice. If you're making claims involving radio equipment, operating practices, licensing, or safety, those claims need to be checked against reliable information. An answer that sounds convincing isn't necessarily correct.

We're also paying attention to self-promotion. Some accounts promoting these projects have donation links, paid services, or other financial interests associated with them. Accepting donations isn't inherently wrong, nor is developing commercial software. But we expect transparency about those interests, and Rule 3 still applies. This subreddit isn't a free advertising channel.

We'll be enforcing these rules seriously.

That doesn't mean every project needs professional documentation, a security audit, or years of development behind it. We'd be happy to see someone share a rough prototype, acknowledge its limitations, and have a proper technical discussion about it.

What we don't want is a stream of promotional posts making claims that their developers can't substantiate, especially when users are being encouraged to install software or hand over information.

And to be clear, allowing a post doesn't mean the moderation team has examined the software or considers it secure.

Amateur radio has always encouraged experimentation, but it also places considerable value on technical knowledge, good engineering practices, and responsible operation. We intend to uphold those standards here.

73,

u/SharkSapphire


r/HamRadio • • Aug 08 '26

Announcements πŸ”Š Final results: Are r/HamRadio users happy hams?

Post image
12 Upvotes

The poll is closed, and at least in this subreddit, the answer was pretty clear: 249 of 290 respondents, or 85.9%, said yes. Only 41, or 14.1%, said no.

Reddit’s core-contributor breakdown adds another interesting piece. Among core contributors, 124 of 141 (87.9%) answered yes. Among everyone else who voted, 125 of 149 (83.9%) answered yes. That roughly 4 percentage-point difference was not statistically significant (Fisher’s exact test, p = 0.40), so there is no strong evidence here that the regulars are substantially happier than the rest of the respondents.

For the poll as a whole, the 85.9% β€œyes” result has a 95% confidence interval of roughly 81.4% to 89.4%.

Of course, this tells us about people who saw and chose to answer a poll on r/HamRadio, not amateur radio operators generally, and definitely not Reddit as a whole. Another amateur-radio subreddit could run the exact same poll and discover a considerably grumpier population.

But for r/HamRadio, 249 out of 290 respondents called themselves happy hams.

Given how much time we spend arguing about FT8, Baofengs, contesters, HOA antennas, lids, whether the bands are dead, and whether somebody 1,500 miles away is using the wrong calling frequency, 86% happy is not bad at all.


r/HamRadio • • 10h ago

Question/Help ❓ Looking for help with value of Ham Radio equipment

Thumbnail
gallery
38 Upvotes

I am helping a friend liquidate her late husbands Ham Radio equipment. I’m looking for some advice on value and best method for selling. I sell coins on eBay all the time so I’m familiar with that platform but some of these pieces are very large and shipping would be cumbersome. Also, these pieces haven’t been used in a few years so I was wondering the best way to confirm functionality. Thanks in advance for any help!


r/HamRadio • • 5h ago

Question/Help ❓ Procedure for ISS repeater bounces

7 Upvotes

New tech here. Just started trying to hit the ISS. Can always hear it but don't know that I'm hitting it. There's a lot going on. Best I can tell is call sign + grid locator for most people. Is that standard? Some dude in Phoenix just keeps calling cq.

Tried 3 baofengs tonight. One for sstv, one for transmit, and one just receiving. Don't think I ever heard myself on the receive side.


r/HamRadio • • 13h ago

Discussion πŸ‘¨β€βš–οΈ The Depiction Of Amateur Radio In The Movies And TV

Thumbnail
hackaday.com
15 Upvotes

r/HamRadio • • 12h ago

Equipment & Rigs πŸ› οΈ New to Ham & I have no Engineering Skills

10 Upvotes

Hi Everyone, I’m thinking about getting into ham radio as a hobby. How difficult is setting up a system? I feel like a big baby, but I have no practical engineering skills at all. I teach calculus-based physics (including oscillations and E&M) so I have oscilloscopes, multimeters, and all the lab equipment I could need… but without step-by-step (literally like IKEA-style) directions I’m completely lost. Is setting up a system fairly easy for someone with book smarts but no actual skills? I don’t want to pay to take my test just to quit when my set up isn’t working.


r/HamRadio • • 6h ago

Question/Help ❓ Critique my mobile build? Would love your feedback!

Post image
3 Upvotes

After enjoying cheap HTs for a little over a year, my lovely wife bought me a Yaesu FTM-510DRASP for my birthday. So, I’m planning a mobile rig build. I’m new to this, so I would love any feedback.

I am thrilled about the Yaesu! My goals to use it for greater transmission range than my HTs, talking on local repeaters, and exploring APRS. If you have anything else you’d recommend, let me know!

Build Plan:
β€’ Power has been routed through the engine firewall (thanks to the help of many YouTube videos on this process).
β€’ I plan to mount the body under my seat.
β€’ I plan to mount the head in a 3D printed mount (thanks to my brother) in the sunglass compartment. I have 10’ of cable for the remote head.
β€’ 25’ of LMR240 to the bed of the truck. I am not certain of the length I’ll need, so I’m probably overestimating.
β€’ Comet SBB-5NMO antenna mounted to the bed.

I’d appreciate any feedback. I appreciate the resources of this community!


r/HamRadio • • 10h ago

News πŸ“° BTech UV-Pro Radio Firmware issues

2 Upvotes

Over this weekend I noticed the firmware should be updated to 9.3.0. Once I did that, the font is now 50% smaller and the Color screen that was very nice is now a black and white screen. The reception also seems to be not as good. I have a Signal stick antenna on it with a BNC connector. Any ideas how I can get the color back on the screen and improve my reception? Big mistake doing this firmware update.


r/HamRadio • • 1d ago

Equipment & Rigs πŸ› οΈ Passed my Technician Level Exam

92 Upvotes

I am the communications officer at my Fire Department and figured I'd get into amateur radio a while ago. I've been studying for my technician class for a few months off and on and finally pulled the trigger this evening. I took the exam remotely and crushed it! Just waiting for the FCC to email me next week so I can pay my $35 and get my call sign. I've been following this subreddit for quite some time now and it seems like opinions vary widely regarding what equipment is best to start out on. I have a couple Baofeng radios that I use for scanning purposes, I've seen a lot of hate regarding them, so I won't ask any advice on them πŸ˜‚. What do you guys recommend for a starter radio? I'm not looking to spend a ton of money, I'm looking more or less to learn more about how radios work. Right now my job as a communications officer is basically programming Motorola portables for our fire fighters, but there isn't really a lot that goes into that. Every radio that gets programmed pretty much has the same programming as the next, unless it's one of us officers who can talk on the dispatch channel, and all I'm really doing there is adding an ANI.


r/HamRadio • • 11h ago

Question/Help ❓ Hard time trying to mesure frequencys from a superheterodine receiver

2 Upvotes

I'm trying to mesure with a oscilloscope the oscilator from a superheterodine receiver but every time and with other receivers I can only see ir 1 to 3 sec on the screen before it just disappear

Any one have a idea why and how to prevent that?


r/HamRadio • • 15h ago

Question/Help ❓ I have a yaesu 897 and would like some carry recommendations or help

3 Upvotes

Ok here is a little more information

I am a full-time wheelchair user who likes working portable and recently got a old 897.

I have an idea to 3d print a cage, (basically side rails with 3 arms on top and bottom that meet in the middle and connect and extended up a little where i can connect a shoulder strap.) but I don't have a 3d printer I have also considered a backpack, but getting things off the back of my chair is difficult particularly with something that big and bulky so I am coming here fore ideas, or if someone is able and willing to print my cage idea they can message me and we can talk about that as well, but mainly just looking for ideas for now.


r/HamRadio • • 16h ago

POTA/SOTA Activations 🏞️ Backpack idea for Yaesu ft-891?

2 Upvotes

I’m looking for some ideas. I’d like to put together a backpack-based setup for POTA (Parks on the Air) using a Yaesu FT-891. If you’ve already built something like this, please share a few photos and a brief explanation of why you chose that particular configuration.


r/HamRadio • • 1d ago

Equipment & Rigs πŸ› οΈ Trying to choose a field rig for Backcountry use.

14 Upvotes

I will be taking my general test soon and am looking into a portable field rig. I'm interested in something that can do 2m/1.25m/70cm and 6m as well as HF (20m/40m/80m). Voice modes only, I don't do anything with CW or digital modes just yet (although I do have a UMPC that I will probably use for FT8 at some point).

At present, Ive narrowed my choices down to the Icom IC-705 and the Yaesu FTX-1 Field. Im leaning towards the Yaesu because I could add the SPA-1 amplifier for home use and get the full 100w but I'm sure there are some opinions out there and I'd love to hear them. I'm also very interested to hear what people would suggest for antennas. I'm leaning towards some sort of long wire inverted v dipole slung over a tree or possibly a telescoping pole. Curious what some more experienced Hams would recommend.

I live in a crowded suburb in Silicon Valley so I'm not hopeful that I'll have great luck on HF from home but I do a fair amount of hiking and camping trips to remote BLM land where I think I'll have a much better time. Would love to eventually do some POTA/SOTA activations eventually as well.

Also, 2m/70cm/1.25m aren't that important for this rig as I have HTs that can do that (Yaesu FTD5R and VX-6R).

Open to any and all suggestions. Thanks in advance!


r/HamRadio • • 1d ago

Question/Help ❓ Finished up to Amateur Extra and trying to know the stuff you cant learn from a test.

19 Upvotes

So like in the title i finished my exams all the way to amateur extra, only because it was like 15 dollars to take all of them and ham radio prep was pretty straight forward and helpful with understanding the material. Now that im fully licensed, im wondering if anyone has like a beginners guide for what transceiver and antenna might be the best and maybe about proper etiquette for long distance calling and what not. I think the next step i would like to take is participate in a contest (just to get my first QSL card lol)and maybe find someone or one of my friends to contact from either short or long distance over the difference bands while actually having a conversation. Sooner or later i would also like to take some equipment on a hike and try to get a call on one of the higher trails while camping (dont worry, i know the difficulties with bringing the proper equipment). Does anyone have any recommendations and tips on how i could make the most out of my license?

To add, I also want to get more into the SDR portion of radio but that was the second hardest subject when trying to understand it so ill get into that later lol.


r/HamRadio • • 1d ago

Question/Help ❓ Roof mount antenna questions 2m/70cm, long ground to house or long coax?

11 Upvotes

Recently got my tech license so I am looking into installing a dual band vertical antenna on my roof 2m/70cm and have a few questions. My local store does not sound very reliable for advice when they told me I shouldnt ground my antenna to the home ground.

I have a pretty tall two store house, the peak on the east and west side are the same height. My dilemma is my shack will be on the east side of the house but the house power boxes is on the west side. Am i better off mounting the antenna on the side of the house near the electrical box to make grounding easier, but the coax would be long (150ft or so)? Or should i mount on the east side to have a shorter coax (<50ft) but a much longer ground cable back to the electrical box? Regardless of which side the antenna is on im guessing that should also be the side with my ground rod?

If i do install on the side of the house near the electrical box the coax would enter the house on the second story, is a long ground cable from a lighting arrestor to the ground rod a problem? Would probably make it 10-15ft, planning on 6awg ground cable.

Plan is to put a J pole in the brick siding on the house near the top, I'd also love recommendations on a good dual band antenna yall recommend, no HOA so size isnt a factor. Trying to play in 2m/70cm bands to start. What is a good choice in coax, does that answer change for a longer run vs a shorter run? Does not seem to be much consensuses on that front.

Thank you all.


r/HamRadio • • 14h ago

Question/Help ❓ Yes or No? Using my personal radio at work.

0 Upvotes

I work at a public school that uses Motorola radios in the building to communicate. The radios are getting old and the batteries die quickly leaving me very annoyed. I have my own personal Baofeng uv-5r mini for hobby listening only since I’m not licensed to transmit. I found what frequencies my school uses and have programmed them into my personal radio.

The question is, am I allowed to use my baofeng at work to communicate with the radios I already use on that frequency only? πŸ€·πŸΎβ€β™‚οΈ The school uses a UHF band frequency.


r/HamRadio • • 2d ago

Licensing & Exams πŸ“œ Just Passed My Technician License Exam

110 Upvotes

I just passed my Technician level exam, the wife is going to take her exam next. I’m looking forward to being able to transmit soon. Anything I should know before I get my call sign?


r/HamRadio • • 2d ago

News πŸ“° Frequency outtage US flight traffic

155 Upvotes

Curious about the recent report of the halt of flights in the US

due to frequency outages.

Any US based Ham that has seen anything strange on

the ATC bands? Wondering if it's a case of jamming or something else.


r/HamRadio • • 2d ago

Vintage Gear πŸ“» Help needed ham radio equipment in Chicagoland

Post image
268 Upvotes

Hello,

My father in law unfortunately passed away last week. He was an avid ham radio and electronics enthusiast and leaves behind a massive table of equipment at his home in the Chicago area.

I was curious if there is anyone on this community who would want to pick the stuff up and use it.

It would be a shame for us to throw away things that could be useful to someone equally enthusiastic.

Any help or suggestions appreciated.

Photo of his ham desk attached. There's more than one can see.

EDIT: This community is amazing. Within 2.5h of posting, I have an appointment with some folks at a local radio club who are coming over to see what's what. Reddit is amazing. Thanks for all the support in this difficult time.


r/HamRadio • • 2d ago

Question/Help ❓ If I keep this in the same room as my HF/VHF/UHF setup, could it cause noise or other problems? I also plan to connect my radios directly to it and use it in UPS mode. Please advise.

Post image
6 Upvotes

r/HamRadio • • 3d ago

News πŸ“° Orbiting ESA satellite plays Doom after receiving voice commands from amateur radio operators on Earth β€” 27 MB AI speech model executes the game on the seventh attempt

Thumbnail
tomshardware.com
84 Upvotes

r/HamRadio • • 2d ago

Discussion πŸ‘¨β€βš–οΈ Ways to communicate old school way .

0 Upvotes

Can you communicate old school with no pc or nets . In a SHFT situation?


r/HamRadio • • 3d ago

Question/Help ❓ Long Shot, Anyone have a code plug for Arizona

9 Upvotes

I have recently gotten a DMR radio and would like to get up and running without digging into learning to program the code plug. I will spend the time learning it all, but would like to get on the air with it while I learn. I have checked several sites where they say you can download one, but I haven't found one for AZ.

Anyone willing to share one with me?

Thanks!


r/HamRadio • • 4d ago

Homebrew/DIY πŸ”§ Building a Cheap 3D-Printed Az/El Satellite Rotator what an experience... I saved a bunch of $$ and learned a bunch.

Thumbnail
gallery
111 Upvotes

TL;DR: I built a satellite antenna rotator on a hobbyist budget using PA3AXA and PE1CKK's 3D-printed az/el design, an Arduino Nano and DB8LE's firmware. It speaks the Yaesu GS-232 protocol, so Hamlib's rotctld and Gpredict drive it from PC. It carries my M1GEO dual-band Moxon/Yagi on a camera tripod and followed a low ISS pass in an indoor test. The things that cost me time, all covered below: centr the 10-turn pots with a meter instead of counting turns, a negative azimuth reading breaks Hamlib, the firmware's LCD code has a bug that leaves the screen blank, and there is no stop command.

Total cost about $100-125

LMK if you have any questions.

Why I built it

I wanted hands-free satellite tracking and I didn't wanna pay a ton of money for a commercial rotator, which costs several hundred dollars at the very least. The answer was PA3AXA and PE1CKK's 3D-printed az/el rotor.

It carries my M1GEO dual-band Moxon/Yagi on a roughly 7/8 inch dowel, sits on a camera tripod, and runs from a 12 V battery. An Arduino Nano emulates the Yaesu GS-232 protocol, so Hamlib's rotctld can drive it and Gpredict can track with it.

Parts (Mostly from Amazon)

Controller

  • ALMOCN Arduino Nano V3 with a screw-terminal shield (Saves a bunch of soldering!)

  • L298N dual H-bridge motor driver

  • DIYables 16x2 I2C LCD

  • Four 6 mm tactile switches for manual jog (up, down, left, right) from the adafruit parts pal.

  • 1N4148 diodes, 560 ohm resistors and a 10 uF capacitor from RST to ground adafruit parts pal.

Mechanics

  • 2 x QWORK JGY-370 12 V, 10 rpm worm-gear motors

  • 2 x Taiss 3590S 10-turn, 10k ohm potentiometers for position feedback

  • uxcell 6707-2RS bearings (35 x 44 x 5 mm)

  • M3 and M4 stainless hardware (assorted but you need a few 50MM)

  • Everything printed in Overture PETG on a Bambu A1

Antenna and support

  • M1GEO dual-band Moxon/Yagi on a wooden dowel

  • A camera tripod and a printed two-piece clamp that holds the dowel and bolts to the elevation plate

  • A 12 V battery for the motors

Credits and links

The printed rotor is by PA3AXA and PE1CKK (PE1CKK's page, Libre Space thread). The firmware is DB8LE's pe1ckk_rotor_software, built on PE1CKK and W9KE's SimpleSat. On the PC side I use VS Code with PlatformIO, Hamlib, Gpredict and PuTTY on Windows.

The build

I printed the rotor in PETG, pressed in the bearings, mounted the motors and set the two 10-turn pots in their slots.

The wiring is simple:

  • Both pots take 5 V and ground from the Nano's 5 V rail. The azimuth wiper goes to A0 and the elevation wiper to A1.

  • Nano pins D7 to D10 (elevation up and down, azimuth left and right) go through 560 ohm resistors to the L298N inputs IN1 to IN4.

  • The jog switches pull those same L298N inputs low through 1N4148 diodes. That means the jog buttons drive the motors directly and never pass through the Nano. This matters later.

  • The 12 V battery feeds the L298N, whose 5 V terminal powers the Nano. A shared ground ties it together.

  • The LCD sits on A4 and A5.

I designed and printed my own controller enclosure with the LCD and a four-button jog pad on the lid it's not perfect (switches glued in. The two-piece boom clamp bolts to the elevation plate's four-hole 50 x 50 mm pattern.

Firmware and software on Windows

  1. Flash the Nano from VS Code with PlatformIO (board nanoatmega328; use nanoatmega328new if you get a sync error). Take the Nano out of the shield first, because the 10 uF reset capacitor blocks uploading in circuit. Never seat or remove the Nano with USB or 12 V connected. With the capacitor in place, the controller doesn't reset when a program opens the serial port.

  2. Leave homing off. //#define startUpHome stays commented out until calibration is finished.

  3. Raw check with PuTTY. Choose Serial, your COM port and 9600, then type C2 and Enter. The controller answers with something like +0180+0180, which is azimuth then elevation.

  4. Start Hamlib's rotctld. The firmware speaks Yaesu GS-232A, so use model 601:

    .\rotctld.exe -m 601 -r COM16 -s 9600 -t 4533 -vv

  5. Test it from a second window with .\rotctl.exe -m 2 -r localhost:4533, then type p.

I run with Hamlib's default limits. If you want guard rails, add --set-conf=min_az=1,max_az=359,min_el=2,max_el=90 to the command.

Two small traps: PowerShell won't run a program from the current folder without the .\ prefix, and only one program can hold the COM port at a time. The firmware README also has a typo in the limits (max_az-359), which should be max_az=359.

Calibration: center the pots with a meter

The firmware maps the pot's whole range to 0 to 360 degrees, so one full turn of a 10-turn pot is 36 degrees on the reading. Mid-travel, half the supply voltage at the wiper, reads about 180.

Don't count turns by hand. I set the pots by counting five turns, and the azimuth ran out of travel near 320 degrees. I then re-centered the azimuth pot with a meter, and it now travels its whole range without stalling.

  1. Power the controller with the pot's pinion gear off. Measure the 5 V rail first rather than assuming 5.00.

  2. Put the meter between ground and the wiper and turn the shaft until it reads half the rail, about 2.50 V.

  3. Park the rotor at its mid-travel mark and refit the gear without turning the shaft. One tooth of the 10-tooth gear is 3.6 degrees.

  4. Leave _azAdZeroOffset at 0. Use _elAdZeroOffset only to trim the elevation. Offsets are in hundredths of a degree, and a positive value lowers the reading:

    new offset = old offset + (reading - true angle) x 100

I paced a phone inclinometer on the boom plate for the true angle, and my elevation offset ended up at 18040.

Azimuth center is south. With the pot centered, mid-travel is 180, which is true south, and north sits at the ends of the pot. A phone compass is unreliable indoors, so finish the south alignment outside. Connecticut is about 13 degrees west, so true south reads about 167 on a magnetic compass.

Things that bit me

  1. Elevation ran away on the first P command. I told it to go from 45 to 50 degrees and it kept going until the reading hit -43. The jog buttons drive the L298N directly, so a jog that works proves the motor and pot agree, but says nothing about whether the Nano's own outputs (D7 to D10) are wired to the right inputs. After any wiring change, test both a jog and a small P move on every axis. If only the automatic move is backward, swap that axis's Nano-side pair (D7/D8 or D9/D10). If both jog and automatic are backward, swap the motor leads. Both of my motors needed their leads swapped. I suspected the wiring for the runaway too, but I now think it traced back to the pot setup.

  2. A negative reading breaks Hamlib. The firmware pads a small negative angle into a malformed reply (+00-2), and rotctl throws a protocol error. Zeroing the azimuth at an arbitrary spot with a big offset puts it right on that edge. Keep the azimuth offset at 0 and centre the pot instead.

  3. The LCD stayed blank after the banner. The firmware declares a second, local lcd object inside setup() that shadows the global one. The local copy draws the banner, but the global copy used by every later update never gets initialized, and its backlight flag defaults to off. Deleting that one line fixes it. The elevation and azimuth numbers are also hard-coded to 90.0 and 100, so I removed those two lines. The screen now shows live readings, and I added my own text.

  4. There is no stop command. The firmware ignores everything except C2 and W, so Hamlib's stop command does nothing. Pulling the 12 V plug is the stop, so keep a hand near it for the first moves.

  5. Gpredict's Track box was grayed out. Engage the rotator first, and Track becomes available. Gpredict also only sends positions while the satellite is above the horizon, so a satellite below the horizon looks like a rotator that ignores it.

Testing indoors with Gpredict

You can check the whole chain without waiting for a pass.

  1. Manual moves first. Open rotctl against the running daemon and send small P moves, for example P 0 50. The axis should move, stop within about 1 to 2 degrees, and p should match. Keep a hand on the battery plug.

  2. Add the rotator in Gpredict under Edit, Preferences, Interfaces, Rotators: host localhost, port 4533, with limits that match your rotctld command.

  3. Engage, then Track. In Antenna Control, pick the satellite and the rotator, set Tolerance to 2 degrees, and click Engage. The -vv window will show the position commands scroll by.

  4. Simulate a pass. From the module's menu open the Time Controller and set the time a few minutes before a pass starts, at normal speed. The satellite rises in the simulation and Gpredict drives the rotor through the pass.

Pick a pass that peaks between about 25 and 60 degrees and doesn't cross north. Passes that peak near 90 degrees swing the azimuth very fast, and a pass through north makes the rotor unwind nearly a full turn.

Before any of that, check mechanical clearance. A long boom tail swings down toward the tripod head as elevation rises, so sweep it slowly and cap your maximum elevation below the point where anything touches. On my tripod it cleared through the full range, so I run no cap.

Where it stands

It's assembled and wired, the antenna is mounted, the firmware is flashed, and both axes move under jog and under rotctl. The pots are centered with a meter, the LCD works, and the controller talks to Hamlib.

I've tracked a low ISS pass indoors, pointing the antenna around the room, and it followed without any problems. I couldn't get outside in time to align to true south, so next I'll do that outdoors and track a higher pass in clear sky. I'll post an update with the results. Let me know if you have any questions.

73, Mike K1MRE