TL;DR: If your G2 refuses to power on and you've already blamed the cable, USB ports and drivers — try replacing the power adapter. It's a standard HP laptop PSU (19.5V, 45W, 4.5×3.0mm blue smart-pin connector). A spare HP laptop charger rated 65W fixed mine.
⚠️ DISCLAIMER — READ BEFORE TRYING THIS
Worked on my unit. I'm not responsible if you cook your headset. Specifically:
Voltage must be exactly 19.5V DC. Not 19V, not 20V, not "close enough". Wrong voltage can fry the headset or link box. Check the label on the adapter.
Don't trust the connector alone. The blue smart-pin tip looks identical across many HP chargers, but voltages differ between models. Verify what's printed on the adapter itself.
Wattage: 45W minimum, higher is fine. The headset draws only what it needs.
Avoid unlabeled third-party replacements — if you can't verify 19.5V, don't plug it in.
I'm a guy on the internet, not HP support. You break it, you own it.
Backstory, briefly
Retired my Rift S (screen-door effect, low fidelity, dead pixels). Then my Quest 3 stopped charging — faulty port — exactly one month after the legal warranty expired. One. Month. Bought a second-hand G2 on Vinted, and the image quality for flight simming has been worth it. Meta will never see my scalp again, but that's another post.
The problem
For weeks, the headset simply refused to power on. Not random disconnects mid-session — it just wouldn't start. The only thing that sometimes helped: fully unplugging everything, putting it away for days, then trying again. Sometimes it worked. Usually it didn't. Extremely frustrating — you plan an evening of MSFS 2024 and spend the first hour performing USB rituals instead of flying.
What I tried, no luck:
Different USB ports (3.0, 3.1, USB-C), cable reseating
Driver and WMR reinstalls
Disabling USB power management
For the record, I run the headset through the Oasis driver (u/mbucchia — Matthieu Bucchianeri). If you're reading this: thank you. You single-handedly brought our headsets back from the grave Microsoft dug for them with 24H2, and keeping G2s alive on modern Windows is genuine resistance work. It's much appreciated. (To be clear, the fault below was pure hardware — a headset that won't power on dies before any driver loads.)
The fix
I realized the G2 power adapter is the same unit HP ships with many of its laptops. I had a spare HP laptop PSU rated 19.5V / 65W — same voltage, same blue smart-pin connector, higher wattage. Swapped it in.
Since then: zero issues, starts every time.
Why this makes sense
The original PSU is spec'd at 45W. As adapters age, output degrades. A worn-out PSU struggling to deliver startup current would explain both the failure to power on and the "leave it unplugged for days" pattern partially working — capacitors draining, conditions shifting just enough to sometimes get over the line. And since I bought the headset second-hand, who knows how many hours that adapter had behind it. I can't prove the old PSU was out of spec (no meter, no lab), so treat this as a strong empirical result, not a diagnosis. But it costs nothing to test if you have an HP laptop charger in a drawer — and it's the step nobody mentions, because everyone jumps straight to blaming the 6m cable.
Replacement checklist
Anyone else fixed this the same way? I couldn't find it documented anywhere — would love to hear if this saves someone else the ritual.