r/GunTips • • Jan 28 '13

Sighting in a rifle at long range? Use cans of shaving cream.

20 Upvotes

This weekend we were sighting in my dad's AR. At 200+ yards, it's fairly difficult to see a target without a high-powered spotting scope. My uncle's solution? Cans of shaving cream.

He stopped by the dollar store and bought $10 worth of cheap shaving cream. We set them up at 200yds to test our sight job.

When you hit a full can of shaving cream (a 4"x 3" target), even at 200yds, you'll know it. Plus, blowing things up is fun.


r/GunTips • • Jan 28 '13

IWB Carry: Try carrying near/over your back pocket to make reaching for your firearm look like reaching for your wallet.

19 Upvotes

r/GunTips • • Jan 28 '13

SKS coated in cosmoline? Soak it in automatic transmission fluid.

13 Upvotes

Automatic transmission fluid is cheap and abundant. Its solvent power is enough to remove cosmoline, but gentle enough to preserve the finish -- even on wood.


r/GunTips • • Jan 28 '13

Paper targets constantly waving at the range (indoor or outdoor)? Fold them in half vertically before hanging them.

12 Upvotes

My favorite indoor range is very well ventilated. But that means that air typically moves through the target area, causing my paper targets to wave. Folding them in half vertically to add a crease to the target before stapling them to the hanger has solved this completely.


r/GunTips • • Jan 29 '13

To store .22 cartridges in a stock smoothly, use straws.

8 Upvotes

Place them inside a plastic drinking straw, then cut it down to length and fasten the ends shut. This helps for easy removal and to keep them from bumping around. Obviously, this technique can be used for storing them anywhere, but is particularly handy for stocks.


r/GunTips • • Sep 14 '20

Advice on first handgun.

7 Upvotes

I'm a woman with fairly medium sized hands, so not tiny hands, as far as grip goes. Looking for something reliable and not too bulky that I can take on long hikes and camping for an extra safety measure. But not so small that it looks ridiculous wee baby gun. I fully intend to get professional training and practice with this gun until I feel confident and proficient. Got my short range jogging and everyday weapons sorted, but when I'm way out away from civilization I don't want to take chances, be it with man or beast. Thanks for any advice.


r/GunTips • • Jan 28 '13

Loose ammo? Store it in a water bottle.

7 Upvotes

It never fails that the 100rd cardboard boxes full of 9MM target ammo fall apart in my range bag -- leaving loose ammo at the bottom of the bag like french fries from McD's.

My range bag has a water bottle holder and I have half a dozen wide mouth Nalgene bottles lying around the house. I was using zip-locks bags, but keeping loose ammo in a Nalgene has proven a lot more useful and less frustrating when it's time to set it out on the bench.


r/GunTips • • Sep 26 '19

Cheap and fun targets? Walmart brand 12 pack of soda!

6 Upvotes

The cans are brightly colored, the contents are biodegradable, explode when hit (even when using .22s), a very disappointing treat on a hot day, and they're only around $2 for 12 targets!


r/GunTips • • Nov 18 '21

Armscor RIA M200 (.38 special); Crane Lock Issue

5 Upvotes

Wanted to disassemble the gun to get to know it better and do a deep clean/oiling. I am having a problem with the last step of reassembly.

During reassembly, everything works well until I attempt to reinsert the crane lock screw, detent, and spring. I line them up (though the detent does not want to fit well into the screw) and screw them in, making sure the spring is in both the detent and the screw. I get resistance before the screw is flush.

If I stop screwing at that resistance point, the gun functions normally: the chamber release works smoothly, the chamber rotates on a double action trigger pull/when cocked and single action fired. If I tighten the screw beyond that point, the chamber is too tight and does not want to rotate or release. Any advice? Thanks!


r/GunTips • • Jan 14 '21

Ar-15 radial delayed blowback build question

5 Upvotes

I am experimenting with the Dolos system, and intend to use three separate barrels with it; 6.5 grendel, 300 blackout, and I was thinking of 5.7 for fun. The only source for a 5.7 barrel and bcg that I could find is Cmmg, but they specify that it converts the operation of the gun to radial delayed blowback.

I haven't been able to find any info on whether or not more modifications need to be made to the gun to make this system work(aside from the magazine conversion). It doesn't use a gas tube, so I am wondering if the receiver gas tube port needs to be plugged in any way(deal breaker). Have any of you built with this kit?

This is the product: https://cmmginc.com/product/barrel-and-bcg-kit-16-1-416ss-sbn-5-7-x-28mm/

For those unfamiliar with the Dolos system, it allows you to do barrel swaps on your AR upper in seconds. The appeal for me is to maximize gun case real estate. I can fit my AR pistol and a rifle length AR with 3 16" to 20" barrels and bcgs in one rolling case.


r/GunTips • • Jul 30 '20

Best iron sight options for sig p365 xl?

5 Upvotes

I bought truglo tfx pro and my local gunsmith said that they were unable to fit the rear sight in place because it just wouldn’t fit appropriately.

Does anyone have any recommendations on sights for this specific gun? I just can’t seem to make the xray3’s work for me. Ideally a FO/tritium combo but if it comes down to it either a blacked out rear sight or fiber optic rear sight will work as well. I’m not quite interested in a red dot at this time.

If you can please be as detailed as you can when recommending something (relative new shooter here) so I can get an objective view on how I should spend my money.

Thanks!


r/GunTips • • Sep 05 '21

Going lefty!

4 Upvotes

Does anyone have any tips or advice about switching sides? For the most part I’m very ambidextrous, however, I shoot my rifles right-handed. My right eye is much weaker now as age has set in, my left eye has become my dominant eye and still has 20/10 vision. I’m finding it hard to find a truly comfortable grip from the left side and was curious if anyone else has gone through this or has experience with it.


r/GunTips • • Jan 31 '18

A website I built to save pictures of your target practice.

4 Upvotes

Website: https://targetarchive.com Screen Shot: https://imgur.com/a/qlzuJ (old, looks better now!)

I built this website initially for myself since I just wanted an easy way to track my progress as a new shooter. I'm curious if other will find it useful and I would love some feedback.


r/GunTips • • Aug 12 '17

Help with accessibility for paralyzed shooter

4 Upvotes

I a 21 year old aspiring shooter. I broke my neck about five years ago leaving me paralyzed with me with limited arm strength and movement as well as confined to a wheelchair. I really want to get back into shooting again. So I bought a mount to hold the gun for me. (http://www.cabelas.com/product/CALDWELL-DEADSHOT-CHAIRPOD/1769631.uts?searchPath=%2Fbrowse.cmd%3FcategoryId%3D734095080%26CQ_search%3Dcaldwell ) long distance is a goal of mine. Do you guys think that this is a realistic goal? Any suggestions/tips/comments are greatly appreciated!


r/GunTips • • Jan 25 '21

Descent cheap flashlight attachment

3 Upvotes

Hey guys, I just bought a s&w m&p 9mm shield ez and I was wondering if you guys have any tips on a flashlight attachment?


r/GunTips • • Jan 17 '21

Gun safe

3 Upvotes

Does anyone know of a relatively cheap gun safe that is only big enough to hold a shotgun and maybe could be slid under a bed I recently turned 18 and plan on buying a home defense shotgun as a first firearm and my mother isn’t too fond of guns but she acknowledges the fact that im going into a line of work surrounded by fire arms so there aint no point in stopping me from buying one but she said if I am to bring a gun into this house i need to buy a gun safe im just looking for something small and cheap because im leaving for the marines in a few months and once im established ill just bring it to base and have it stored in the armory


r/GunTips • • Aug 12 '19

Lefty AR Upper/Lower Fitment Question

3 Upvotes

So, I'm a lefty and I'm building my first AR. I just got a complete LWRC M6 IC lower and have been hunting around for an upper to match that ejects brass on the left. It's proving to be difficult as I'd also like the upper not to have a forward assist.

I have already contacted F1 Firearms about their offerings and it looks like their uppers would interfere with the bolt catch on the right side.

I've also been looking into the Faxon ARAK 21 upper. This looks sweet as hell being piston driven but it looks like, again, the upper would interfere with the right bolt catch.

Does anyone have any recommendations or experience regarding an upper that would fit these criteria? Could be complete or stripped.

(I've heard and understand the arguments not to go full lefty, but would still like to complete the build this way if at all possible.)

Thanks!


r/GunTips • • Feb 18 '18

What Age Did You Buy Your First Gun?

3 Upvotes

Hi, I am 17 going to be 18 soon and ever since I was a kid wanted a gun. I have shot guns with my dad and now I am saving up money for a gun. I live in CA unfortunately, so as far as an AR goes I might just get an upper and wait on a lower till I move after college. I was thinking about getting a 590 A1 Moss or a 10/22 since rimfire is exempt apparently.

Any advice would be great!


r/GunTips • • Jul 22 '21

Looking for tips on things to increase accuracy, range, and destructive power.

2 Upvotes

What gun components give the best for these. Assume ammunition is a ball, and its a load and fire once kind of gun. Whats the best sort of gun parts/dimensions for this kind of thing. I was doing research and found shorter barrels increase velocity, any other tips like this would be helpful. Also does rifling affect velocity or anything? Or does it just increase accuracy. Any and all tips are welcomed.

This weapon doesn't exist but it won't be using powder, it builds pressure then releases all at once.


r/GunTips • • Apr 20 '21

Semi Recommendations?

2 Upvotes

Hey guys and gals I’m looking to buy my first rifle and was wondering what to look for in a semi auto chambered in 223,5.56,7.62,10mm,308,30-06,270 etc looking at under $500 for a basic setup, no add ons or upgrades right off the bat.


r/GunTips • • Mar 21 '21

Holster help.

2 Upvotes

Ok so I have a CZ p09 that I conceal carry. The only problem is that I suffer from NAAA(No arse at all)disease and my pants keep falling down no matter how tight I have my belt. Should I look into a smallerhand gun for concealed carry or is there some sort of trick to it. I tried the side holsters but being a big guy they are too revealing when I wear my work uniform.


r/GunTips • • Nov 14 '18

Questions about registration on a 80% pistol

2 Upvotes

Hey all, Want to build a glock 19 from an 80%, but I'm having trouble finding info on how to register it. I'd like to be able to CC it now that we are in cold months.

Basically just wondering if it needs to be registered, and how I would go about doing it. I at least would want to be able to take it to a range and use it without worrying about anything illegal. If it's just a range toy, do I need to register, or is that just if I plan to carry it. I definitely am not looking for a safe gun.

Not sure if this is the right place for this question, but any help is appreciated. Also, I'm in Michigan if that helps.

Thanks guys!!!


r/GunTips • • Jan 21 '18

GZP TAC-15B AR15 or Ruger AR 556 MPR

2 Upvotes

I know I’m not getting Daniel Defense quality here but I still think these two free floating AR’s are good quality.

The GZP all in will cost me about $500 so I can afford a nice Nikon scope too.

The MPR all in would be about $630.

What do y’all think? GZP
MPR


r/GunTips • • Nov 26 '17

Cons to an AR-10/ AR-9?

2 Upvotes

I recently finished my first build, an AR-15, and I’ve been contemplating what I should build/ buy next. I’ve been throwing ideas off of my friend, who’s a little more gun savvy than I am, and he seems to be very adamant about any AR platform that’s not an AR-15. My question is, are there actual drawbacks/ cons to the other AR platforms (AR-10 & AR-9), or is my friend just biased towards the AR-15?


r/GunTips • • Oct 15 '17

Pistol Attachment - Help

2 Upvotes

I recently bought a pistol light. I like it a lot however it does not properly fit on my pistol. The issue is the rail piece does not match up to the slot, so it does not properly lock in. The male piece on the pistol attachment does not sit within the female slot on the picatinny rail, and due to the size of it, I am unable to place it or lock it in another slot. I am able to take the male piece off the attachment, making the pistol attachment completely smooth where it meets the rail.

Even if I can't get it to properly fit I am planning on keeping it for future pistols, but I would like to get a simple mod so I can use it on this gun. It is a 22lr pistol, without much kick, so I figured I could get away with attaching something to the light so it catches and locks in rail's groove. The clamp on it works well, but it's not enough to prevent the attachment from sliding of the rail while shooting. I was thinking about some small screws in the pistol light or gluing something to it so it won't slide off while shooting. I have had trouble googling this, and I know it's because I'm not using the words or asking the right questions! Any experience with this is appreciated.